Intel DG31GL Product Guide - Page 16

Hi-Speed USB 2.0 Support, LAN Status LEDs, Table 3. LAN Connector LEDs - drivers

Get Intel DG31GL - Desktop Board Essential Series Motherboard PDF manuals and user guides
UPC - 735858200929
View all Intel DG31GL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Intel Desktop Board DG31GL Product Guide Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 2). These LEDs indicate the status of the LAN. Figure 2. LAN Status LEDs Table 3 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 3. LAN Connector LEDs LED A (Green) LED State Off Indicates LAN link is not established On (steady state) LAN link is established B (Yellow) Blinking Off On (steady state) LAN activity is occurring 10 Mb/s data rate 100 Mb/s data rate Hi-Speed USB 2.0 Support The Desktop Board supports up to eight USB 2.0 ports (four ports routed to the back panel and four ports routed to two internal headers) via the ICH7. USB 2.0 ports are backward compatible with USB 1.1 devices. USB 1.1 devices will function normally at USB 1.1 speeds. USB 2.0 support requires both an operating system and drivers that fully support USB 2.0 transfer rates. Disabling Hi-Speed USB in the BIOS reverts all USB 2.0 ports to USB 1.1 operation. This may be required to accommodate operating systems that do not support USB 2.0. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Intel Desktop Board DG31GL Product Guide
16
Two LEDs are built into the RJ-45 LAN connector located on the back panel (see
Figure 2).
These LEDs indicate the status of the LAN.
Figure 2.
LAN Status LEDs
Table 3 describes the LED states when the board is powered up and the LAN
subsystem is operating.
Table 3. LAN Connector LEDs
LED
LED State
Indicates
A (Green)
Off
LAN link is not established
On (steady state)
LAN link is established
Blinking
LAN activity is occurring
Off
10 Mb/s data rate
B (Yellow)
On (steady state)
100 Mb/s data rate
Hi-Speed USB 2.0 Support
The Desktop Board supports up to eight USB 2.0 ports (four ports routed to the back
panel and four ports routed to two internal headers) via the ICH7.
USB 2.0 ports are
backward compatible with USB 1.1 devices.
USB 1.1 devices will function normally at
USB 1.1 speeds.
USB 2.0 support requires both an operating system and drivers that fully support
USB 2.0 transfer rates.
Disabling Hi-Speed USB in the BIOS reverts all USB 2.0 ports
to USB 1.1 operation.
This may be required to accommodate operating systems that
do not support USB 2.0.