Intel DG31GL Product Guide - Page 32
Removing the Processor, Installing and Removing Memory - board specifications
UPC - 735858200929
View all Intel DG31GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Intel Desktop Board DG31GL Product Guide Removing the Processor For instructions on how to remove the processor fan heat sink and processor, refer to the processor installation manual. Installing and Removing Memory NOTE To be fully compliant with all applicable Intel SDRAM memory specifications, the board requires DIMMs that support the Serial Presence Detect (SPD) data structure. The desktop board has two 240-pin DDR2 DIMM sockets providing Channel A and Channel B. For dual-channel performance, install a matched pair of DIMMs equal in speed and size (see Figure 13). Figure 13. Dual Channel Memory Configuration Example NOTE All other memory configurations will result in single-channel memory operation. 32
Intel Desktop Board DG31GL Product Guide
32
Removing the Processor
For instructions on how to remove the processor fan heat sink and processor, refer to
the processor installation manual.
Installing and Removing Memory
NOTE
To be fully compliant with all applicable Intel SDRAM memory specifications, the board
requires DIMMs that support the Serial Presence Detect (SPD) data structure.
The desktop board has two 240-pin DDR2 DIMM sockets providing Channel A and
Channel B.
For dual-channel performance, install a matched pair of DIMMs equal in
speed and size (see Figure 13).
Figure 13.
Dual Channel Memory Configuration Example
NOTE
All other memory configurations will result in single-channel memory operation.