Intel DG965RY Intel Desktop Board DG965RY Product Guide English - Page 17

LAN Subsystem, LAN Subsystem Software, RJ-45 LAN Connector LEDs - motherboard drivers

Page 17 highlights

Desktop Board Features LAN Subsystem The LAN subsystem, with Intel 82801HB (ICH8) provides the following functions: • Intel 82566DC Gigabit (10/100/1000 Mb/s) Ethernet LAN controller • Intel 82801HB I/O Controller Hub (ICH8) • Support for RJ-45 connector with status indicator LEDs • Programmable transit threshold • Configurable EEPROM that contains the MAC address LAN Subsystem Software For LAN software and drivers, refer to the DG965RY link on Intel's World Wide Web site at: http://support.intel.com/support/motherboards/desktop RJ-45 LAN Connector LEDs Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 2). These LEDs indicate the status of the LAN. Figure 2. LAN Connector LEDs Table 3 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 3. LAN Connector LEDs LED A B LED Color Green N/A Green Yellow LED State Off On Blinking Off On On Indicates LAN link is not established. LAN link is established. LAN activity is occurring. 10 Mb/s data rate 100 Mb/s data rate 1000 Mb/s data rate 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

Desktop Board Features
17
LAN Subsystem
The LAN subsystem, with Intel 82801HB (ICH8) provides the following functions:
Intel 82566DC Gigabit (10/100/1000 Mb/s) Ethernet LAN controller
Intel 82801HB I/O Controller Hub (ICH8)
Support for RJ-45 connector with status indicator LEDs
Programmable transit threshold
Configurable EEPROM that contains the MAC address
LAN Subsystem Software
For LAN software and drivers, refer to the DG965RY link on Intel’s World Wide Web
site at:
RJ-45 LAN Connector LEDs
Two LEDs are built into the RJ-45 LAN connector located on the back panel (see
Figure 2). These LEDs indicate the status of the LAN.
Figure 2.
LAN Connector LEDs
Table 3 describes the LED states when the board is powered up and the LAN
subsystem is operating.
Table 3. LAN Connector LEDs
LED
LED Color
LED State
Indicates
A
Off
LAN link is not established.
Green
On
LAN link is established.
Blinking
LAN activity is occurring.
N/A
Off
10 Mb/s data rate
Green
On
100 Mb/s data rate
B
Yellow
On
1000 Mb/s data rate