Intel DH61DL English Product Guide - Page 19
USB Support, SATA Support, Expandability, Legacy I/O - usb 3 0 driver
View all Intel DH61DL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Desktop Board Features USB Support The Desktop Board supports USB 3.0 and USB 2.0. USB 3.0 is supported via two USB 3.0 ports (blue) on the back panel. USB 3.0 ports are backward compatible with USB 2.0 and USB 1.1 devices. The USB 3.0 ports are SuperSpeed, high-speed, fullspeed, and low-speed capable. USB 3.0 support requires both an operating system and drivers that fully support USB 3.0 transfer rates. There are eight USB 2.0 ports (two ports routed to back panel connectors (black) and six ports routed to three onboard headers (black)). The USB 2.0 ports are high-speed, full-speed, and low-speed capable. USB 2.0 support requires both an operating system and drivers that fully support USB 2.0 transfer rates. NOTE Intel recommends connecting USB keyboard and mouse devices to USB 2.0 ports (black). Operating system installation may be interrupted if keyboard and mouse devices are connected to the SuperSpeed USB 3.0 ports (blue) due to the lack of native USB 3.0 driver support from the operating system. The device driver for the USB 3.0 host controller must be installed from the included Intel® Express Installer Driver and Software DVD before it can be operational in the operating system. SATA Support The board provides three SATA 3.0 Gb/s channels, through the PCH, which support one device per channel. Expandability Intel Desktop Board DH61DL provides the following expansion capability: • One PCI Express 2.0 x1 connector • One PCI Express Mini Card connector supporting Half-Mini and Full-Mini Cards Legacy I/O The board's Legacy I/O Controller provides the following legacy features: • PS/2 back panel connector for mouse/keyboard support • One serial port header • One parallel port connector on the back panel • Intelligent power management, including a programmable wake-up event interface The BIOS Setup program provides configuration options for the Legacy I/O controller. 19