Intel DH67CF Product Specification - Page 18

System Memory

Get Intel DH67CF PDF manuals and user guides View all Intel DH67CF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Intel Desktop Board DH67CF Technical Product Specification 1.5 System Memory The board has two DIMM sockets and supports the following memory features: • 1.5 V DDR3 SDRAM DIMMs with gold plated contacts, with the option to raise the voltage to support higher performance DDR3 SDRAM DIMMs. • Support for 1.35V Low Voltage DDR3 (new JEDEC specification) • Two independent memory channels with interleaved mode support • Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported. • 16 GB maximum total system memory (with 4 Gb memory technology). Refer to Section 2.1.1 on page 41 for information on the total amount of addressable memory. • Minimum recommended total system memory: 512 MB • Non-ECC DIMMs • Serial Presence Detect • DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs NOTE To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency. Table 3 lists the supported DIMM configurations. Table 3. Supported Memory Configurations DIMM Capacity 512 MB 1024 MB 2048 MB 2048 MB 4096 MB Configuration (Note) SS SS DS SS DS SDRAM Density 1 Gbit 1 Gbit 1 Gbit 2 Gbit 2 Gbit SDRAM Organization Front-side/Back-side 1 Gb x16/empty 1 Gb x8/empty 1 Gb x8/1 Gb x8 2 Gb x8/empty 2 Gb x8/2 Gb x8 Number of SDRAM Devices 4 8 16 8 16 Note: "DS" refers to double-sided memory modules (containing two rows of SDRAM) and "SS" refers to single-sided memory modules (containing one row of SDRAM). For information about... Tested Memory Refer to: http://support.intel.com/support/motherboards/desktop/sb /CS-025414.htm 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Intel Desktop Board DH67CF Technical Product Specification
18
1.5
System Memory
The board has two DIMM sockets and supports the following memory features:
•
1.5 V DDR3 SDRAM DIMMs with gold plated contacts, with the option to raise the
voltage to support higher performance DDR3 SDRAM DIMMs.
•
Support for 1.35V Low Voltage DDR3 (new JEDEC specification)
•
Two independent memory channels with interleaved mode support
•
Unbuffered, single-sided or double-sided DIMMs with the following restriction:
Double-sided DIMMs with x16 organization are not supported.
•
16 GB maximum total system memory (with 4 Gb memory technology).
Refer to
Section 2.1.1 on page 41 for information on the total amount of addressable
memory.
•
Minimum recommended total system memory:
512 MB
•
Non-ECC DIMMs
•
Serial Presence Detect
•
DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs
NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board
should be populated with DIMMs that support the Serial Presence Detect (SPD) data
structure.
This allows the BIOS to read the SPD data and program the chipset to
accurately configure memory settings for optimum performance.
If non-SPD memory
is installed, the BIOS will attempt to correctly configure the memory settings, but
performance and reliability may be impacted or the DIMMs may not function under the
determined frequency.
Table 3 lists the supported DIMM configurations.
Table 3.
Supported Memory Configurations
DIMM
Capacity
Configuration
(Note)
SDRAM
Density
SDRAM Organization
Front-side/Back-side
Number of SDRAM
Devices
512 MB
SS
1 Gbit
1 Gb x16/empty
4
1024 MB
SS
1 Gbit
1 Gb x8/empty
8
2048 MB
DS
1 Gbit
1 Gb x8/1 Gb x8
16
2048 MB
SS
2 Gbit
2 Gb x8/empty
8
4096 MB
DS
2 Gbit
2 Gb x8/2 Gb x8
16
Note:
“DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers to
single-sided memory modules (containing one row of SDRAM).
For information about…
Refer to:
Tested Memory
/CS-025414.htm