Intel DQ45EK Product Guide - Page 45

USB 2.0 Headers, Serial Port Header, Table 9. USB 2.0 Header Signal Names

Page 45 highlights

Installing and Replacing Desktop Board Components USB 2.0 Headers See Figure 18, C for the location of the two USB 2.0 headers. Table 9 shows the pin assignments for each USB 2.0 header. Each USB header can be used to connect two USB devices. Table 9. USB 2.0 Header Signal Names USB Port A Pin Signal Name Pin 1 Power (+5 V) 2 3 D- 4 5 D+ 6 7 Ground 8 9 Key 10 Note: USB ports may be assigned as needed. USB Port B Signal Name Power (+5 V) DD+ Ground No Connection NOTE Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the cable. Use a shielded cable that meets the requirements for a full-speed USB device. Serial Port Header See Figure 18, D for the location of the serial port header. Table 10 shows the pin assignments for the header. Table 10. Serial Port Header Signal Names Pin Signal Name 1 DCD 3 TXD# 5 Ground 7 RTS 9 RI Pin Signal Name 2 RXD# 4 DTR 6 DSR 8 CTS 10 No Connection 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

Installing and Replacing Desktop Board Components
45
USB 2.0 Headers
See Figure 18, C for the location of the two USB 2.0 headers.
Table 9 shows the pin
assignments for each USB 2.0 header.
Each USB header can be used to connect two
USB devices.
Table 9. USB 2.0 Header Signal Names
USB Port A
USB Port B
Pin
Signal Name
Pin
Signal Name
1
Power (+5 V)
2
Power (+5 V)
3
D-
4
D-
5
D+
6
D+
7
Ground
8
Ground
9
Key
10
No Connection
Note:
USB ports may be assigned as needed.
NOTE
Computer systems that have an unshielded cable attached to a USB port might not
meet FCC Class B requirements, even if no device or a low-speed USB device is
attached to the cable.
Use a shielded cable that meets the requirements for a
full-speed USB device.
Serial Port Header
See Figure 18, D for the location of the serial port header.
Table 10 shows the pin
assignments for the header.
Table 10. Serial Port Header Signal Names
Pin
Signal Name
Pin
Signal Name
1
DCD
2
RXD#
3
TXD#
4
DTR
5
Ground
6
DSR
7
RTS
8
CTS
9
RI
10
No Connection