Intel H2000 Technical Product Specification

Intel H2000 Manual

Get Intel H2000 PDF manuals and user guides View all Intel H2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Intel H2000 manual content summary:

  • Intel H2000 | Technical Product Specification - Page 1
    Intel® Server Board S2600JF Technical Product Specification Intel order number G31608-005 Revision 1.4 September 2012 Enterprise Platforms and Services Division - Marketing
  • Intel H2000 | Technical Product Specification - Page 2
    Intel® Server Added NTB support in instructions marked "reserved" or "undefined." Intel this manual is furnished for informational use part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Intel Corporation. Intel
  • Intel H2000 | Technical Product Specification - Page 3
    16 KVM/Serial Over LAN (SOL) Function 28 3.4.17 IDE-R Function...29 3.4.18 Manageability ...29 3.4.19 System Management Bus (SMBus 2.0 29 3.4.20 Network Interface Controller (NIC 30 3.5 InfiniBand* Controller 31 3.5.1 Device Interfaces 32 Revision 1.4 iii Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 4
    Table of Contents Intel® Server Board S2600JF TPS 3.5.2 Quad Small Form-factor Pluggable (QSFP) connector 33 3.6 Integrated Baseboard Management Controller Overview 33 3.6.1 Super I/O Controller 35 3.6.2 Graphics Controller and Video Support 36 3.6.3 Remote KVM...37 4. Platform
  • Intel H2000 | Technical Product Specification - Page 5
    ...64 5.1 HotKeys Supported During POST 64 6. Configuration Jumpers 113 Chassis Identify Button 121 7.3.4 Power LED...121 7.3.5 System Status LED 122 7.3.6 Chassis ID LED 124 7.4 I/O Connectors 124 7.4.1 PCI Express* Connectors 124 7.4.2 VGA Connector 130 Revision 1.4 v Intel
  • Intel H2000 | Technical Product Specification - Page 6
    USB Connectors 133 7.4.9 QSFP for InfiniBand 133 7.5 Fan Headers ...134 7.6 Chassis Intrusion 134 8. Intel® Light-Guided Diagnostics 135 8.1 Front Panel Support 135 8.1.1 System ID LED 135 8.1.2 System Status LED 135 8.1.3 Network Link/Activity LED 135 8.1.4 Dedicated InfiniBand
  • Intel H2000 | Technical Product Specification - Page 7
    Intel® Server Board S2600JF TPS Table of Contents 10.2.14 Ripple/Noise...143 10.2. Manager 2.0 IPMI Integrated Sensors 168 Appendix E: POST Code LED Decoder 170 Appendix F: Video POST Code Errors 175 Glossary ...179 Reference Documents ...182 Revision 1.4 vii Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 8
    Socket ILM Variations 11 Figure 8. Processor with IMC Functional Block Diagram 14 Figure 9. Intel® Server Board S2600JF family DIMM Slot Layout 18 Figure 10. General Functional Block Diagram of Processor I/O Sub-system 20 Figure 11.PCI Express* Lane distribution scheme 21 Figure 12. PCIe Riser
  • Intel H2000 | Technical Product Specification - Page 9
    Intel® Server Board S2600JF TPS List of Figures Figure 39. Hard Disk Order Screen 111 Figure 44. Exit Screen...111 Figure 45. Jumper Blocks (J6B1, J1E2, J1E3, J1E1, J1D5 113 Figure 46. System Status LED (A) and ID LED (B 122 Figure 47. Rear Panel Diagnostic LEDs (Block A 136 Figure 48. Turn On
  • Intel H2000 | Technical Product Specification - Page 10
    Table 1. Intel® Server Board S2600JF Feature Set 3 Table 2. Intel® Server Board S2600JF Features 8 Table 3. Mixed Processor Configurations 12 Table 4. UDIMM Support Guidelines 16 Table 5. RDIMM Support Guidelines 16 Table 6. LRDIMM Support Guidelines 16 Table 7. Intel® Server Board S2600JF
  • Intel H2000 | Technical Product Specification - Page 11
    Intel® Server Board S2600JF TPS List of Tables Table 40. Setup Utility - System Acoustic and Performance Configuration Screen Fields ........94 Table 41. Setup Utility - Security Configuration Screen Fields 96 Table 42. Setup Utility - Server Management Configuration Screen Fields 98 Table 43.
  • Intel H2000 | Technical Product Specification - Page 12
    Intel® Server Board S2600JF TPS Table 81. Chassis Intrusion Header (J6C1 134 Table 82. Network link/activity LED 135 Table 83. InfiniBand* link/activity LED 136 Table 84. Server 168 Table 95. POST Progress Code LED Example 171 Table 96. Diagnostic LED POST Code Decoder 171 Table 97. POST
  • Intel H2000 | Technical Product Specification - Page 13
    Intel® Server Board S2600JF TPS List of Tables Revision 1.4 xiii Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 14
  • Intel H2000 | Technical Product Specification - Page 15
    Chapter 2 - Server Board Overview  Chapter 3 - Product Architecture Overview  Chapter 4 - Platform Management Functional Overview  Chapter 5 - BIOS Setup Interface  Chapter 6 - Configuration Jumpers  Chapter 7 - Connector/Header Location and Pin-out  Chapter 8 - Intel® Light-Guided Diagnostics
  • Intel H2000 | Technical Product Specification - Page 16
    -density VLSI and power delivery components that need adequate airflow to cool. Intel® ensures through its own chassis development and testing that when Intel® server building blocks are used together, the fully integrated system will meet the intended thermal requirements of these components. It is
  • Intel H2000 | Technical Product Specification - Page 17
    and high density computing markets. This server board is designed to support the Intel® Xeon® processor E5-2600 product family. Previous generation Intel® Xeon® processors are not supported. Many of the features and functions of the server board family are common. A board will be identified
  • Intel H2000 | Technical Product Specification - Page 18
    RAID 0/1/10/5  Onboard ServerEngines* LLC Pilot III* Controller  Support for Intel® Remote Management Module 4 Lite solutions  Intel® Light-Guided Diagnostics on field replaceable units  Support for Intel® System Management Software  Support for Intel® Intelligent Power Node Manager (Need PMBus
  • Intel H2000 | Technical Product Specification - Page 19
    and component locations. The majority of the items identified are common in the Intel® Server Board S2600JF family. The accompanying table will identify variations when present. A 2x7 fan control connector B VRS (4 total) C Riser Slot3 with PCIe Gen3x16 D CPU2 DIMM (4 total) E CPU1 DIMM
  • Intel H2000 | Technical Product Specification - Page 20
    Board S2600JF TPS 2.1.1 Board Rear Connector Placement The Intel® Server Board S2600JF has the following board rear connector placement: Description A NIC port 1 (RJ45) H IB status and Diagnostic LED Figure 3. Rear Panel Connector Placement 6 Revision 1.4 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 21
    Intel® Server Board S2600JF TPS Server Board Overview 2.1.2 Server Board Mechanical Drawings The following figure is a mechanical drawing for the Intel® Server Board S2600JF: Figure 4. Baseboard and Mounting holes Revision 1.4 7 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 22
    , and other supporting components including the Integrated BMC, the Intel® i350 network interface controller, and the Mellanox* ConnectX-3* InfiniBand* (depending on the board SKU). The reduced board size allows four boards reside in a standard multi-node 2U Intel® Server Chassis H2000JF for high
  • Intel H2000 | Technical Product Specification - Page 23
    Intel® Xeon® E5-2600 CHANNEL 3 CHANNEL 2 CHANNEL 1 CHANNEL 0 DMI GEN2 x4 (4GB/s) USB PCI-E GEN3 x16 (32GB/s) PCI-E GEN3 x8 (16GB/s) PCI-E GEN3 x16 (32GB/s) Slots Support LPC (33MHz) SERVER ENGINES PILOT 3 IBMC NC-SI PORT 1 (RMII) 100Mbps SERIAL PORT A VIDEO RGB 2x5 HDR Intel® I350 Dual NIC
  • Intel H2000 | Technical Product Specification - Page 24
    40 PCI Express* Gen3 lanes controlled by ten PCI Express* Master Controllers. The target TDPs are: 50W, 60W, 70W, 80W, 95W, 115W, 130W, and 135W on Intel® Server Board S2600JF. Previous generation Intel® Xeon® processors are NOT supported on the Intel® server boards described in this document. For
  • Intel H2000 | Technical Product Specification - Page 25
    Although the server board does support dual-processor configurations consisting of different processors that meet the following defined criteria, Intel® does not perform validation testing of this configuration. For optimal system performance in dual-processor configurations, Intel® recommends that
  • Intel H2000 | Technical Product Specification - Page 26
    Product Architecture Overview Intel® Server Board S2600JF TPS Table 3. Mixed Processor Configurations Error Processor family not identical Severity Fatal Processor cache not identical Fatal Processor frequency (speed) Major not identical System Action The BIOS detects the error condition and
  • Intel H2000 | Technical Product Specification - Page 27
    Intel® Server Board S2600JF TPS Product Architecture Overview 3.3 Processor Function Overview With the release of the Intel® Xeon® processor E5-2600 product family, several key system components, including the CPU, Integrated Memory Controller (IMC), and Integrated IO Module (IIO), have been
  • Intel H2000 | Technical Product Specification - Page 28
    Intel® QuickPath Interconnect includes a cache coherency protocol to keep the distributed memory and caching structures coherent during system operation. It supports Cache Core 7 Core 6 Core 5 Core 4 IMC -Memory Controller Figure 8. Processor with IMC Functional Block Diagram  Unbuffered DDR3
  • Intel H2000 | Technical Product Specification - Page 29
    ) or a predefined test pattern.  Isochronous access support for Quality of Service (QoS).  Minimum memory configuration: independent channel support with 1 DIMM populated.  Integrated dual SMBus* master controllers.  Command launch modes of 1n/2n.  RAS Support: o Rank Level Sparing and Device
  • Intel H2000 | Technical Product Specification - Page 30
    Product Architecture Overview Intel® Server Board S2600JF TPS Table 4. UDIMM Support Guidelines Notes: 1. 2. 3. 4. Ranks Per DIMM and Data Width SRx8 ECC DRx8 ECC Memory Capacity Per DIMM1 1GB 2GB 2GB 4GB 4GB 8GB Speed (MT/s) and
  • Intel H2000 | Technical Product Specification - Page 31
    mixed DIMM configurations are supported, Intel® only performs platform validation on systems that are configured with identical nomenclature for DIMM sockets is detailed in the following table: Table 7. Intel® Server Board S2600JF DIMM Nomenclature (0) Channel A A1 Processor Socket 1 (1) (2)
  • Intel H2000 | Technical Product Specification - Page 32
    total system memory on the diagnostic screen at the end of POST. This total is the same as the amount described by the first bullet above. 3.3.2.4 RAS Features The server board supports the following memory RAS modes:  Independent Channel Mode  Rank Sparing Mode 18 Revision 1.4 Intel order
  • Intel H2000 | Technical Product Specification - Page 33
    Intel® Server Board S2600JF TPS Product Architecture Overview  Mirrored Channel Mode  Lockstep Channel Mode Regardless of RAS mode, the requirements for populating within a channel given in the section 3.3.2.2 must be met at all times. Note that support as system access is a 128-bit data access
  • Intel H2000 | Technical Product Specification - Page 34
    local processor to independently configure and control the local subsystem, system The following sub-sections will describe the server board features that are directly supported Intel® C600 Series chipset will be described in its own dedicated section. 3.3.3.1 Riser Card Support The server
  • Intel H2000 | Technical Product Specification - Page 35
    16 PCIe Gen3 signals are routed to Riser Card 3; all 16 lanes are routed from CPU 2. Following is the scope of I/O connection from processors on Intel® Server Board S2600JF: CPU CPU1 CPU1 CPU1 CPU1 CPU2 CPU2 CPU2 CPU2 Figure 11. PCI Express* Lane distribution scheme Table 8. CPU1 and CPU2 PCIe
  • Intel H2000 | Technical Product Specification - Page 36
    Overview Intel® Server Board S2600JF TPS Note: All riser slots are defined specially for dedicated risers only. Plug in normal PCIe riser or PCIe add-in card directly will cause danger and may burn out the add-in riser or card. Riser Slot 3 can only be used in dual processor configurations. Any
  • Intel H2000 | Technical Product Specification - Page 37
    feature set, the server board supports the option of adding a single I/O module providing external ports for a variety of networking interfaces. The I/O module attaches to a high density 80-pin connector of I/O module carrier on the Riser 2. Refer to Intel® Server System H2000JF Technical Product
  • Intel H2000 | Technical Product Specification - Page 38
    in each direction (10Gb/s concurrent). PCI Express* Root Ports 1-4 or Ports 5-8 can independently be configured to support four x1s, two x2s, one x2 and two x1s, or one x4 port widths. From PCH on Intel® Server Board S2600JF, PCIe Port8 x1 Gen2 is connected to BMC Gen1 Uplink. Ports 1-4 are
  • Intel H2000 | Technical Product Specification - Page 39
    ports is not required. 3.4.4 Serial Attached SCSI (SAS) and Serial ATA (SATA) Controller The Intel® C600-A/B chipset provides storage support through two integrated controllers: AHCI and SCU. By default, the server board will support up to six SATA ports: Two single 6Gb/s SATA ports routed from the
  • Intel H2000 | Technical Product Specification - Page 40
    SATA RAID levels 0,1,10, 5.  Intel® Rapid Storage Technology (RSTe) supporting SATA RAID levels 0,1,5,10. The server board is capable of supporting additional chipset embedded SAS and RAID options from the SCU controller when configured with one of several available Intel® RAID C600 Storage Upgrade
  • Intel H2000 | Technical Product Specification - Page 41
    . Any two of the seven DMA channels can be programmed to support fast Type-F transfers. Channel 4 is reserved as a generic bus master request. The Intel® C600 PCH supports LPC DMA, which is similar to ISA DMA, through the PCH's DMA controller. LPC DMA is handled through the use of the LDRQ# lines
  • Intel H2000 | Technical Product Specification - Page 42
    circuit permits softwareindependent entrance to low-power states. The PCH contains full support for the Advanced Configuration and Power Interface (ACPI) Specification, Revision 4.0a. 3.4.14 Fan Speed Control The Intel® C600 PCH integrates four fan speed sensors (four TACH signals) and four
  • Intel H2000 | Technical Product Specification - Page 43
    If the processor does not fetch the first instruction, the PCH will reboot the system.  ECC Error Reporting: When detecting an ECC error, the host controller has the ability to send one of several messages to the Intel® C600 PCH. The host controller can instruct the PCH to generate any of SMI#, NMI
  • Intel H2000 | Technical Product Specification - Page 44
    with two fully integrated GbE Media Access Control (MAC) and Physical Layer (PHY) ports. The Intel® i350 NIC provides the server board with support for dual LAN ports designed for 10/100/1000 Mbps operation. Refer to the Intel® i350 Gigabit Ethernet Controller Datasheet for full details of the
  • Intel H2000 | Technical Product Specification - Page 45
    to trigger digital pins and thermal throttling with hysteresis. 3.5 InfiniBand* Controller Intel® Server Board S2600JFQ and JF2600JFF are populated with a new generation InfiniBand* adapter device. Mellanox* ConnectX-3* supports Virtual Protocol Interconnect® (VPI), providing single port 10/20/40
  • Intel H2000 | Technical Product Specification - Page 46
    Intel® Server connect ConnectX-3* to the host processor. The ConnectX-3* supports a PCI Express 3.0* x8 uplink connection with transfer rates configurations described in the following table: Table 12. Network port configuration Port Configured as 10/20/40/56 Gb/s InfiniBand* 32 Revision 1.4 Intel
  • Intel H2000 | Technical Product Specification - Page 47
    , and chassis configure and monitor  Management Link: Connect to BMC through SMBus* and NC-SI  Others including: MDIO, GPIO and JTAG 3.5.2 Quad Small Form-factor Pluggable (QSFP) connector Port of the Mellanox* ConnectX-3* is connected to a single QSFP connector on Intel® Server Board S2600JF
  • Intel H2000 | Technical Product Specification - Page 48
    x1 SMBUS PORTS 2 USB 2.0 (480Mbs) LPC (33MHz) SERVER ENGINES PILOT 3 IBMC NC-SI PORT 1 (RMII) 100Mbps Intel® I350 Dual NIC Dual 1Gb LAN SERIAL PORT A VIDEO by an embedded ARM9 controller and associated peripheral functionality that is required for IPMI-based server management. Firmware usage of
  • Intel H2000 | Technical Product Specification - Page 49
    Intel® Server Board S2600JF TPS Product Architecture Overview  Two independent10/100/1000 Ethernet Controllers with RMII/RGMII support.  DDR2/3 16-bit interface with up to 800 MHz operation.  12 10-bit ADCs.  Sixteen fan tachometers.  Eight Pulse Width Modulators (PWM).  Chassis intrusion
  • Intel H2000 | Technical Product Specification - Page 50
    Product Architecture Overview Intel® Server Board S2600JF TPS The server board does not support PS/2 interface keyboards and mice. However, the system BIOS recognizes USB specification-compliant keyboards and mice. 3.6.1.2 Wake-up Control The super I/O contains functionality that allows various
  • Intel H2000 | Technical Product Specification - Page 51
    Intel® Server Board S2600JF TPS Product Architecture Overview is allocated resources and is considered the secondary video device. The BIOS Setup utility provides options to configure Based Video Compression and Redirection Logic  Supports both text and Graphics redirection  Hardware assisted
  • Intel H2000 | Technical Product Specification - Page 52
    G31813) and BIOS Core External Product Specification (EPS) for Intel® Server products based on the Intel® Xeon® processor E5- 4600,2600, and 1600 product families. 4.1 Baseboard Management Controller (BMC) Firmware Feature Support The following sections outline general features that the integrated
  • Intel H2000 | Technical Product Specification - Page 53
    Intel® Server Board S2600JF TPS Platform Management Functional Overview  BMC self-test: The generates diagnostic beep codes for fault conditions.  System GUID storage and retrieval.  Front panel management: The BMC controls the system status LED and chassis ID LED. It supports secure lockout of
  • Intel H2000 | Technical Product Specification - Page 54
    Platform Management Functional Overview Intel® Server Board S2600JF TPS  Power fault analysis.  Intel® Light-Guided Diagnostics.  Address Resolution Protocol (ARP): The BMC sends and responds to ARPs (supported on embedded NICs).  Dynamic Host Configuration Protocol (DHCP): The BMC performs
  • Intel H2000 | Technical Product Specification - Page 55
    table).  Enhancements to fan speed control.  DCMI 1.1 compliance.  Support for embedded web server UI in Basic Manageability feature set.  Enhancements to embedded web server. o Human-readable SEL. o Additional system configurability. o Additional system monitoring capability. o Enhanced on-line
  • Intel H2000 | Technical Product Specification - Page 56
    Platform Management Functional Overview Intel® Server Board S2600JF TPS 4.2 Advanced Configuration and Power Interface (ACPI) The server board has support for the following ACPI states: Table 15. ACPI Power States State S0 S1 S2 S3 S4 S5 Supported Yes Yes No No No Yes Description Working. 
  • Intel H2000 | Technical Product Specification - Page 57
    -LAN protocols 4.6.1 Channel Management Every messaging interface is assigned an IPMI channel ID by IPMI 2.0. Commands are provided to configure each channel for privilege levels and access modes. Table 16 shows the standard channel assignments: Revision 1.4 43 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 58
    1 (Provided by the Intel® Dedicated Server Management NIC) Reserved USB Secondary IPMB Supports Sessions No Yes Yes Yes Yes No No 7 SMM No 8 - 0Dh Reserved - 0Eh Self 2 - 0Fh SMS/Receive Message Queue No Notes: 1. Optional hardware supported by the server system. 2. Refers to the
  • Intel H2000 | Technical Product Specification - Page 59
    sessions that can be supported by the BMC is Intel® Dedicated Server Management NIC IPMI channel sessions but are counted as IPMI sessions in limit calculations. 10. It is an IPMI Over LAN RMCP+ session and is included in counts as part of the larger IPMI Over LAN group. Revision 1.4 45 Intel
  • Intel H2000 | Technical Product Specification - Page 60
    a server is platform-specific but all baseboard device options provide support for an NC-SI manageability interface. This provides a sideband high-speed connection for manageability traffic to the BMC while still allowing for a simultaneous host access to the OS if desired. The Network Controller
  • Intel H2000 | Technical Product Specification - Page 61
    NIC port)  BMC LAN 3 (Dedicated NIC) 1000M (10M in DC off state) 1000M (10M in DC off state) 1000M 4.6.5 IPv6 Support In addition to IPv4, the Intel® Server Board S2600JF supports IPv6 for manageability channels. Configuration of IPv6 is provided by extensions to the IPMI Set and Get LAN
  • Intel H2000 | Technical Product Specification - Page 62
    Overview Intel® Server Board S2600JF TPS  There are two variants of automatic IP Address Source configuration vs. just DHCP for IPv4. The three possible IPv6 IP Address Sources for configuring the BMC are:  Static (Manual): The IP, Prefix, and Gateway parameters are manually configured by
  • Intel H2000 | Technical Product Specification - Page 63
    extensions. In order to store and access the extended SEL information, five OEM commands are implemented that closely follow the standard IPMI SEL commands but provide support for the SEL Extension data. These OEM commands are specified in the Intel® General Application Commands table. 4.8 Sensor
  • Intel H2000 | Technical Product Specification - Page 64
    access to its own FRU device and to the FRU devices throughout the server. The FRU device ID mapping is defined in the Platform Specific Information. The BMC controls unit - soft power control failure offset. VR Watchdog Timer Supported Yes Yes Yes Yes Yes 1-5-1-4 The system does not power on
  • Intel H2000 | Technical Product Specification - Page 65
    Event Logging Causal Event Chassis Control command (pulse diagnostic Code Support Power State Retention ARP/DHCP Support PECI Thermal Management Support E-mail Alerting Embedded Web Server SSH Support Integrated KVM Integrated Remote Media Redirection Local Directory Access Protocol (LDAP) Intel
  • Intel H2000 | Technical Product Specification - Page 66
    BMC FW initializes, it attempts to access the Intel® RMM4 lite. If the attempt to access Intel® RMM4 Lite is successful, then the BMC activates the advanced features. Advanced manageability features are supported over all NIC ports enabled for server manageability. This includes baseboard NICs as
  • Intel H2000 | Technical Product Specification - Page 67
    Security The KVM redirection feature supports multiple encryption algorithms, including configurable amount of time (30 minutes is the default). The default inactivity timeout is 30 minutes, but may be changed through the embedded web server. Remote KVM activation does not disable the local system
  • Intel H2000 | Technical Product Specification - Page 68
    ROM ISO files. See the Tested/supported Operating System List for more information.  Media redirection shall support redirection for a minimum of two an operating system on a bare metal server (no OS present) using the remotely mounted device. This may also require the use of KVM-r to configure the
  • Intel H2000 | Technical Product Specification - Page 69
    Intel® Server Board S2600JF TPS Platform Management Functional Overview  If either a virtual floppy device is remotely attached during system boot, the virtual floppy is presented as a bootable device. It is not possible to present only a single-mounted device type to the system BIOS. Note: When
  • Intel H2000 | Technical Product Specification - Page 70
    Platform Management Functional Overview Intel® Server Board S2600JF TPS The embedded web user interface supports strong security (authentication, encryption, and firewall support) since it enables remote server configuration and control. The user interface presented by the embedded web user
  • Intel H2000 | Technical Product Specification - Page 71
    and authorization is supported over the any NIC configured for system management. The BMC uses a standard Open LDAP implementation for Linux*. 4.12.6 Platform/Chassis Management Within an IPMI 2.0 framework, the BMC Firmware provides functionality to support management and control of several
  • Intel H2000 | Technical Product Specification - Page 72
    the server board. It allows the user to select which supported chassis (Intel® or Non-Intel®) and platform chassis configuration is used. Based on the input provided, the FRUSDR writes sensor data specific to the configuration to NVRAM for the BMC controller to read each time the system is powered
  • Intel H2000 | Technical Product Specification - Page 73
    4.12.8 Node Power On/Off Control The BMC on each node will monitor its fans and temperature for a critical failure. When a critical failure occurs the node will be powered down by BMC. When this occurs the node will need to be manually powered on. 4.13 Intel® Intelligent Power Node Manager 4.13
  • Intel H2000 | Technical Product Specification - Page 74
    S2600JF TPS 4.14 Management Engine (ME) 4.14.1 Overview The Intel® Server Platform Services (SPS) is a set of manageability services provided by the firmware executing on an embedded ARC controller within the IOH. This management controller is also commonly referred to as the Management Engine (ME
  • Intel H2000 | Technical Product Specification - Page 75
    Intel® Server Board S2600JF TPS Platform Management Functional Overview Figure 20. Management Engine Distribution Model 4.14.3 ME System with PMBus* devices in the power supplies for support of various NM-related features. This bus is .  The Management Engine has access to the "Host SMBus*". 4.14
  • Intel H2000 | Technical Product Specification - Page 76
    14.5 ME Power and Firmware Startup On Intel® Server Board S2600JF, the ME is on standby The ME FW does not support an IPMI update mechanism except for the case that the system is configured with a dual-ME (redundant throttling, based on the situation. System power control modes include:  SmaRT: Low
  • Intel H2000 | Technical Product Specification - Page 77
    supported and required to support Intel® Dynamic Power Node Manager. Intel® Server Board S2600JF supports the features of Intel® Dynamic Power Node Manager version 1.5 except the inlet temperature sensor. 4.15.4 Node Power Policies When working with Intel® Server Chassis H2000JF be manually powered
  • Intel H2000 | Technical Product Specification - Page 78
    processing is in progress. The Intel® Server Board S2600JF Family BIOS recognizes a number of HotKeys system configuration, the POST Diagnostic Screen is displayed with a summary of system configuration information. The diagnostic screen displays the following information:  "Copyright Intel
  • Intel H2000 | Technical Product Specification - Page 79
    Setup Utility The BIOS Setup utility is a text-based utility that allows the user to configure the system and view current settings and environment information for the platform devices. The Setup utility controls the platform's built-in devices, the boot manager, and error manager. The BIOS Setup
  • Intel H2000 | Technical Product Specification - Page 80
    BIOS Setup Interface Intel® Server Board S2600JF TPS The Setup page layout is sectioned into functional the hierarchy, until the top-level Tab page is reached. The Setup Item List is a set of control entries and informational items. The list is displayed in two columns. For each item in the list: 
  • Intel H2000 | Technical Product Specification - Page 81
    Intel® logo is displayed. The following message is displayed on the diagnostics screen and under the Quiet Boot logo screen: Press to enter setup When the Setup Utility is entered, the Main screen is displayed. However, serious errors cause the system field contains configurable parameters.
  • Intel H2000 | Technical Product Specification - Page 82
    Setup Interface Intel® Server Board S2600JF On 106-key Japanese keyboards, the plus key has a different scan code than the plus key on the other keyboards, but will have the same available in the BIOS Setup utility for the configuration of the server platform. For each of these screens, there
  • Intel H2000 | Technical Product Specification - Page 83
    Intel® Server Board S2600JF TPS BIOS Setup Interface  The Help Text entry to take effect. Alternatively, pressing discards the changes and resumes POST to continue to boot the system according to the boot order set from the last boot. 5.4.2.1 Map of Screens and Functionality There are a
  • Intel H2000 | Technical Product Specification - Page 84
    Screens Processor Configuration Power and Performance Memory Configuration  Mass Storage Controller Configuration PCI Configuration  Serial Port Configuration USB Configuration System Acoustic and Performance Configuration Console Redirection System Information BMC LAN Configuration CDROM Order
  • Intel H2000 | Technical Product Specification - Page 85
    Intel® Server Board S2600JF TPS BIOS Setup Interface Main Advanced Security Server Management Boot Options Logged in as: Platform ID System BIOS BIOS Version Build Date Memory Total Memory Quiet Boot POST Error Pause System Date System Time Administrator/User <
  • Intel H2000 | Technical Product Specification - Page 86
    critical POST errors. If enabled, the POST Error Pause option takes the system to the error manager to review the errors when major errors occur. Minor and fatal error displays are not affected by this setting. System Date has configurable fields for Month, Day, and Year. Use [Enter] or [Tab] key
  • Intel H2000 | Technical Product Specification - Page 87
    Intel® Server Board S2600JF TPS BIOS Setup Interface Main Advanced Security Server Management Boot Options Boot Manager ► Processor ► Power & Performance ► Memory Configuration ► Mass Storage Controller Configuration ► PCI Configuration ► Serial Port Configuration ► USB Configuration ► System
  • Intel H2000 | Technical Product Specification - Page 88
    Setup Interface Intel® Server Board S2600JF TPS Advanced Processor Configuration Processor ID Processor Intel® Virtualization Technology Intel® VT for Direct I/O Enhanced Error Containment Mode MLC Streamer MLC Spatial Prefetcher DCU Data Prefetcher DCU Instruction Prefetcher Direct Cache Access
  • Intel H2000 | Technical Product Specification - Page 89
    ID string of processor with CPUID instruction. Information only. Brand ID string of processor with CPUID instruction. Information only. Current speed that vendor regarding OS support of this feature. This option is only visible if the processor in the system support Intel® Turbo Boost Technology
  • Intel H2000 | Technical Product Specification - Page 90
    this feature in order for it to be enabled. This option is only visible if all processors installed in the system support Intel® VT. The software configuration installed on the system must support this feature in order for it to be enabled. This option is only visible if all processors installed in
  • Intel H2000 | Technical Product Specification - Page 91
    Intel® Server Board S2600JF TPS BIOS Setup Interface Setup Item MLC Streamer Options Enabled Disabled MLC Spatial Prefetcher Enabled Disabled DCU Data Prefetcher Enabled Disabled DCU Instruction Prefetcher Enabled Disabled Direct Cache Access (DCA) Enabled Disabled SMM Wait Timeout 20
  • Intel H2000 | Technical Product Specification - Page 92
    BIOS Setup Interface Intel® Server Board S2600JF TPS Power & Configuration Auto Max (Auto Max) (Auto Max) /6.4 GT/s /7.2 GT/s /8.0 GT/s Enabled/Disabled (Enabled) (Enabled) Balanced Power Power Balanced Power Power (Auto Max) 6.4 GT/s (Enabled) (Enabled) 78 Revision 1.4 Intel
  • Intel H2000 | Technical Product Specification - Page 93
    /Disabled (Enabled) (Enabled) (Enabled) Prefetcher DCU Instruction Enabled/Disabled (Enabled) (Enabled) (Enabled) Prefetcher Direct Cache Enabled/Disabled (Enabled) (Enabled) (Enabled) Access (DCA) Setup: Advanced > Memory Configuration Memory Operating Auto/800/1067 (Auto) (Auto
  • Intel H2000 | Technical Product Specification - Page 94
    screen allows the user to view details about the DDR3 DIMMs that are installed as system memory. To access this screen from the Main screen, select Advanced > Memory Configuration. To move to another screen, press the key to return to the Advanced screen, then select the desired screen
  • Intel H2000 | Technical Product Specification - Page 95
    Intel® Server Board S2600JF TPS BIOS Setup Interface Table 33. Setup Utility - Memory Configuration Screen Fields Setup Item Total Memory Effective Memory Current Configuration Options Comments Information only. The amount of memory available in the system in the form of installed DDR3 DIMMs in
  • Intel H2000 | Technical Product Specification - Page 96
    BIOS Setup Interface Intel® Server Board S2600JF TPS Setup Item DIMM_ XY Options configuration options, such as whether to use Memory Mirroring or Memory Sparing. To access this screen from the Main screen, select Advanced > Memory Configuration > Memory RAS and Performance Configuration
  • Intel H2000 | Technical Product Specification - Page 97
    into the server board on which the BIOS is executing. To access this screen from the Main screen, select Advanced > Mass Storage Controller Configuration. To move to another screen, press the key to return to the Advanced screen, then select the desired screen. Revision 1.4 83 Intel order
  • Intel H2000 | Technical Product Specification - Page 98
    BIOS Setup Interface Intel® Server Board S2600JF TPS Advanced Mass Storage Controller Configuration AHCI Controller Configuration SATA/SAS Controller Configuration AHCI Capable SATA Controller SAS/SATA Capable Controller 2 ports of 6Gb/s SATA 4 ports in SAS mode Disable/Compatibility/Enhanced/
  • Intel H2000 | Technical Product Specification - Page 99
    Intel® Server Board S2600JF TPS BIOS Setup Interface Setup Item SATA Port x Options Not Installed Drive Info Help Text Ports 0-1: 6Gb SATA capable port Comments Information only. This is repeated for all 6 SATA Port for the Onboard SATA Controller. This section for SATA Drive Information does
  • Intel H2000 | Technical Product Specification - Page 100
    Intel® Server Board S2600JF TPS Table 36. Setup Utility - PCI Configuration OS without PAE support, depending on the system configuration. Only enable for an OS without PAE support. Comments When 1 CPU Socket 2 Onboard video controller. Warning: System video is completely disabled if this option
  • Intel H2000 | Technical Product Specification - Page 101
    Intel® Server Board S2600JF TPS BIOS Setup Interface Setup Item Dual Monitor Video NTB PCIe Port on CPU Socket 1 Enable NTB Bars Crosslink Control Override NTB PCIe Port on CPU Socket 2 Enable NTB Bars Crosslink Control Override NIC Configuration Options Enabled Disabled Help Text If enabled.
  • Intel H2000 | Technical Product Specification - Page 102
    Module 1 Type IOM1 InfiniBand Option ROM IOM1 Port1 GUID IOM1 Port1 MAC Address Intel® Server Board S2600JF TPS Enabled / Disabled Enabled / Disabled / Disabled Figure 29. NIC Configuration Screen Table 37. Setup Utility - NIC Configuration Screen Fields
  • Intel H2000 | Technical Product Specification - Page 103
    Intel® Server Module 1 GbE controllers. This option is grayed out and not accessible if the discs system as an Onboard or IO Module NIC. None Intel® 82574 Single-Port Gigabit Ethernet Controller Intel® I350 Dual-Port Gigabit Ethernet Controller Intel® I350 Quad-Port Gigabit Ethernet Controller Intel
  • Intel H2000 | Technical Product Specification - Page 104
    BIOS Setup Interface Intel® Server Board S2600JF TPS Setup Item NIC1 Controller NIC2 Controller NIC2 InfiniBand* Option ROM IOM1 InfiniBand* Option ROM NIC2 Port1 GUID IOM1 Port1 GUID NIC1 Port1 NIC1 Port2 NIC2 Port1 NIC2 Port2 NIC1 Port1 PXE NIC1 Port2 PXE NIC2 Port1 PXE NIC2 Port2 PXE IOM1 Port1
  • Intel H2000 | Technical Product Specification - Page 105
    Intel® Server Board S2600JF TPS BIOS Setup Interface Setup Item NIC1 Port1 MAC the MAC address. 5.4.2.11 Serial Port Configuration The Serial Port Configuration screen allows the user to configure the Serial A [COM 1] and Serial B [COM2] ports. To access this screen from the Main screen,
  • Intel H2000 | Technical Product Specification - Page 106
    BIOS Setup Interface Intel® Server Board S2600JF TPS 5.4.2.12 USB Configuration The USB Configuration screen allows the user to configure the USB controller options. To access this screen from the Main screen, select Advanced > USB Configuration. To move to another screen, press the key
  • Intel H2000 | Technical Product Specification - Page 107
    Intel® Server Board S2600JF System Acoustic and Performance Configuration The System Acoustic and Performance Configuration screen allows the user to configure the thermal control behavior of the system with respect to what parameters are used in the system's Fan Speed Control algorithms. To access
  • Intel H2000 | Technical Product Specification - Page 108
    used with an OEM chassis and DIMMs with TSOD. The firmware does not change the offset registers for closed loop during runtime, although the Management Engine can do so. SOLTT is intended for a system with UDIMMs which do not have TSOD. The thermal control registers are configured during POST, and
  • Intel H2000 | Technical Product Specification - Page 109
    Intel® Server Board S2600JF TPS BIOS Setup Interface Setup Item Set Fan Profile Options Performance Acoustics Fan PWM 0 Offset Quiet Fan Idle Disabled Mode Enabled Help Text [Performance] - Fan control provides primary system on those boards that support TPM. To access this screen from the
  • Intel H2000 | Technical Product Specification - Page 110
    Intel® Server Board S2600JF TPS Main Advanced Security Server 41. Setup Utility - Security Configuration Screen Fields Setup Item Options Administrator use the user account. User password is used to control entry access to BIOS Setup Utility. Only alphanumeric characters can be used
  • Intel H2000 | Technical Product Specification - Page 111
    system information, and controlling the BMC LAN configuration. To access this screen from the Main screen or other top-level Tab screen, press the right or left arrow keys to traverse the tabs at the top of the Setup screen until the Server Management screen is selected. Revision 1.4 97 Intel
  • Intel H2000 | Technical Product Specification - Page 112
    BIOS Setup Interface Intel® Server Board S2600JF TPS Main Advance d Security Server Management Boot Options Boot Console Redirection ► System Information ► BMC LAN Configuration Figure 34. Server Management Screen Table 42. Setup Utility - Server Management Configuration Screen Fields Setup
  • Intel H2000 | Technical Product Specification - Page 113
    BIOS programs the watchdog timer with the timeout value selected. If the OS does not complete booting before the timer expires, the BMC resets the system and an error is logged. Requires OS support or Intel® Management Software. If the OS boot watchdog timer is enabled, this is the
  • Intel H2000 | Technical Product Specification - Page 114
    Setup Interface Intel® Server Board S2600JF TPS Setup Item Shutdown Policy Options Enabled Disabled Console Redirection System Information BMC LAN Configuration Help Text Enable/Disable Shutdown Policy View/Configure console redirection information and settings. View system information View
  • Intel H2000 | Technical Product Specification - Page 115
    console redirection. 5.4.2.17 System Information The System Information screen allows the user to view part numbers, serial numbers, and firmware revisions. This is an Information Only screen To access this screen from the Main screen, select Server Management > System Information. To move to
  • Intel H2000 | Technical Product Specification - Page 116
    Information Board Part Number Board Serial Number System Part Number System Serial Number Chassis Part Number Chassis Serial Number Asset Tag BMC Firmware Revision HSC Firmware Revision ME Firmware Revision SDR Revision UUID Intel® Server Board S2600JF TPS Server Management
  • Intel H2000 | Technical Product Specification - Page 117
    18 BMC LAN Configuration The BMC configuration screen allows the Setup user to configure the BMC Baseboard LAN channel and the RMM4 LAN channel, and to manage BMC User settings for up to five BMC Users. To access this screen from the Main screen, select Server Management > System Information. To
  • Intel H2000 | Technical Product Specification - Page 118
    BIOS Setup Interface Intel® Server Board S2600JF TPS BMC LAN Configuration Server Management Baseboard LAN configuration IP Source IP Address Subnet Mask Gateway IP Baseboard LAN IPV6 configuration IPV6 IPV6 source IPV6 address Gateway IPV6 IPV6 Prefix Length Static/Dynamic [0.0.0.0 IP display/
  • Intel H2000 | Technical Product Specification - Page 119
    Intel® Server Board S2600JF TPS BIOS Setup Interface Setup Item IP source Options Static Dynamic IP address Subnet Mask Gateway IP Intel id to configure. Available only when IP source for any one channel is dynamic option. View/Select user privilege Enable/Disable LAN access for selected user
  • Intel H2000 | Technical Product Specification - Page 120
    BIOS Setup Interface Intel® Server Board S2600JF TPS 5.4.2.19 Boot Options Screen (Tab) The Boot Options screen displays all bootable media encountered during POST, and allows the user to configure the desired order in which boot devices are to be tried. The first boot device in the specified
  • Intel H2000 | Technical Product Specification - Page 121
    Intel® Server Board S2600JF TPS BIOS Setup Interface Table 46. Setup Utility - Boot Options Screen will be put at the bottom of the respective list [Disabled] - Devices removed from the system are deleted from Boot Order Tables. [Enabled] - Devices removed have positions in Boot Order Tables
  • Intel H2000 | Technical Product Specification - Page 122
    allows the user to control the order in which BIOS attempts to boot from the network bootable devices installed in the system. This screen is only available when there is at least one network bootable device available in the system configuration. 108 Revision 1.4 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 123
    Intel® Server Board S2600JF TPS BIOS Setup Interface To access this screen from the Main screen, select Boot Options > Legacy devices for this Device group. Help Text Set system boot order by selecting the boot option for this position. Set system boot order by selecting the boot option for this
  • Intel H2000 | Technical Product Specification - Page 124
    configure the system boot option order. 5.4.2.24 Error Manager Screen (Tab) The Error Manager screen displays any POST Error Codes encountered during BIOS POST, along with an explanation of the meaning of the Error Code in the form of a Help Text. This is an Information Only screen. To access
  • Intel H2000 | Technical Product Specification - Page 125
    Intel® Server Board S2600JF TPS Error Manager Save&Exit ► View Event Log ERROR CODE SEVERITY 5224 Major Load User Default Values is selected, the system is restored to the previously saved user-defined default values. To access this screen from the Main screen or
  • Intel H2000 | Technical Product Specification - Page 126
    BIOS Setup Interface Intel® Server Board S2600JF TPS Table 52. Setup Utility - Exit  Pressing from within the BIOS Setup utility.  Moving the clear system configuration jumper.  IPMI command (set System Boot options command)  Int15 AX=DA209  Choosing Load User Defaults from the Exit
  • Intel H2000 | Technical Product Specification - Page 127
    Jumpers The following table provides a summary and description of configuration, test, and debug jumpers on the Intel® Server Board S2600JF. The server board has several 3-pin jumper blocks that can be used. Pin 1 on each jumper block can be identified by the following symbol on the silkscreen
  • Intel H2000 | Technical Product Specification - Page 128
    Configuration Jumpers Intel® Server Board S2600JF TPS Table 53. Server Board Jumpers (J6B1, J1E2, J1E3, J1E1, down and remove the AC power cord. 2. Open the server chassis. See your server chassis documentation for instructions. 3. Move jumper from the default operating position, covering pins1
  • Intel H2000 | Technical Product Specification - Page 129
    configure, protect, or recover specific features of the server board. 6.1.2 Force ME Update (J1E2) When this 3-pin jumper is set, it manually puts the ME firmware in update mode, which enables the user to update ME firmware code the server chassis. For instructions, see your server chassis
  • Intel H2000 | Technical Product Specification - Page 130
    covering pins 1 and 2. 8. Close the server chassis. 9. Power up the server. The password is now cleared and you can reset it by going into the BIOS setup. 6.1.4 BIOS Recovery Mode (J1E1) The Intel® Server Board S2600JF uses BIOS recovery to repair the system BIOS from flash corruption in the main
  • Intel H2000 | Technical Product Specification - Page 131
    BIOS settings are reset to factory default Steps to clear BIOS settings: 1. Power down server. Do not unplug the power cord. 2. Open the server chassis. For instructions, see your server chassis documentation. 3. Move jumper (J1D5) from the default operating position, covering pins 1 and 2, to the
  • Intel H2000 | Technical Product Specification - Page 132
    Configuration Jumpers Intel® Server Board S2600JF TPS Note: Removing AC Power before performing the BIOS settings Clear operation causes the system to automatically power up and immediately power down, after the procedure is followed and AC power is re-applied. If this happens, remove the AC
  • Intel H2000 | Technical Product Specification - Page 133
    Name +12V +12V +12V 7.2 System Management Headers 7.2.1 Intel® Remote Management Module 4 (Intel® RMM4 Lite) Connector A 7-pin Intel® RMM4 Lite connector (J1A2) is included on the server board to support the optional Intel® Remote Management Module 4. There is no support for third-party management
  • Intel H2000 | Technical Product Specification - Page 134
    Locations and Pin-out Intel® Server Board S2600JF TPS system BIOS and the Integrated BMC support provide the functionality of the various supported control panel buttons and LEDs. The following sections describe the supported functionality of each control panel feature. 120 Revision 1.4 Intel
  • Intel H2000 | Technical Product Specification - Page 135
    BIOS turns off the system. 7.3.2 Reset Button The platform supports a front control panel reset button. Pressing the reset button initiates a request forwarded by the Integrated BMC to the chipset. The BIOS does not affect the behavior of the reset button. 7.3.3 Chassis Identify Button The front
  • Intel H2000 | Technical Product Specification - Page 136
    ~1 Hz blink Solid on Intel® Server Board S2600JF TPS 7.3.5 System Status LED Note: The system status LED state shows the system hardware state and overrides the green status. The Integrated BMC-detected state and the state from the other controllers, such as the SCSI/SATA hot-swap controller
  • Intel H2000 | Technical Product Specification - Page 137
    the contribution to the system status LED. Support for an upper, non-critical threshold limit is not provided in default SDR configuration. However if a user does enable this threshold in the SDR, then the system status LED should behave as described. Revision 1.4 123 Intel order number G31608
  • Intel H2000 | Technical Product Specification - Page 138
    and Pin-out Intel® Server Board S2600JF TPS 7.3.6 Chassis ID LED The chassis ID LED provides a visual indication of a system being serviced. The state of the chassis ID LED is affected by the following:  Toggled by the chassis ID button  Controlled by the Chassis Identify command (IPMI
  • Intel H2000 | Technical Product Specification - Page 139
    Intel® Server Board S2600JF TPS Connector/Header Locations and Pin-out Pin Pin A47 GND A48 PERxP7 A49 PERxN7 A50 GND A51 GND A52 PERxP8 A53 PERxN8 A54 GND A55 GND A56 PERxP9 Description GPU Fan speed control Clock pair 1 Clock pair 1 Rx Lane 0+ Rx Lane 0- Rx Lane 1+ Rx Lane 1- Rx Lane 2+ Rx Lane
  • Intel H2000 | Technical Product Specification - Page 140
    Connector/Header Locations and Pin-out Intel® Server Board S2600JF TPS Pin Pin Name B57 GND B58 PETxP10 B59 PETxN10 B60 GND B61 GND B62 PETxP11 data RGMII receive data RGMII receive data RGMII receive data RGMII receive Cntrl RGMII receive Clock 126 Revision 1.4 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 141
    Intel® Server Board S2600JF TPS Connector/Header Locations and Pin-out Pin Pin Name B16 PERST# B17 WAKE# B18 PETxP0 B19 PETxN0 B20 GND B21 Lane 6+ Rx Lane 6- Rx Lane 7+ Rx Lane 7- Rx Lane 8+ Rx Lane 8- Rx Lane 9+ Rx Lane 9- Rx Lane 10+ Rx Lane 10- Revision 1.4 127 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 142
    Connector/Header Locations and Pin-out Intel® Server Board S2600JF TPS Pin Pin Name B63 PETxN11 B64 GND B65 GND B66 PETxP12 B67 PETxN12 B68 GND B69 GND B70 for GPU 66W for GPU For wake on LAN Clock pair 1 Clock pair 1 Rx Lane 0+ Rx Lane 0Rx Lane 1+ 128 Revision 1.4 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 143
    Intel® Server Board S2600JF TPS Connector/Header Locations and Pin-out Pin Pin Name B23 GND B24 PETxP1 B25 PETxN1 B26 GND B27 GND B28 PETxP2 B29 Lane 8- Rx Lane 9+ Rx Lane 9- Rx Lane 10+ Rx Lane 10- Rx Lane 11+ Rx Lane 11- Rx Lane 12+ Rx Lane 12- Revision 1.4 129 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 144
    Connector/Header Locations and Pin-out Intel® Server Board S2600JF TPS Pin Pin 2x8 CPU1 Riser ID (0) Riser ID (1) 1 0 1 0* CPU2 Riser ID (2) 1 0 Notes: 1. 2. S2600JF board supports only one GPIO for slot 2 riser ID. However, there are three types of riser defined for Slot 2. o PCIe 1
  • Intel H2000 | Technical Product Specification - Page 145
    SATA Connectors The server board provides one SATA port connector named SATA-1 port (J6D1) on board. Additional four SAS ports are provided through bridge board. The pin configuration for each connector is identical and defined in the following table. Revision 1.4 131 Intel order number G31608
  • Intel H2000 | Technical Product Specification - Page 146
    Connector/Header Locations and Pin-out Intel® Server Board S2600JF TPS Table 73. SATA Connector Pin 1 2 3 4 are read by the system ME to enable different versions of LSI* RAID 5 software stack and/or upgrade from SATA to SAS storage functionality. The pin configuration of connector is identical
  • Intel H2000 | Technical Product Specification - Page 147
    DATAH0 Differential date line paired with DATAL0 Ground One 2x5 connector on the server board provide an option to support two additional internal USB port (USB 2/3). The pin-out is detailed in GND IB_TX0_DP2 IB_TX0_DN2 GND IB_TX0_DP0 IB_TX0_DN0 Revision 1.4 133 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 148
    to a switch assembly that is mounted just under the chassis cover on systems that support this feature. When the chassis cover is removed, the switch and thus the electrical connection between the pins on this header become open allowing the Server Engines PILOT III BMC's CHASIS_N pin to be pulled
  • Intel H2000 | Technical Product Specification - Page 149
    to assist in troubleshooting board-level issues. This section provides a description the location and function of each LED on the server board. 8.1 Front Panel Support The Intel® Server Board S2600JF supports Mini-FP on Intel® Server Chassis H2000JF. The front panel control signals are provided
  • Intel H2000 | Technical Product Specification - Page 150
    , each of which is assigned a specific hex POST code number. As each configuration routine is started, the BIOS displays the given POST code to the POST code diagnostic LEDs on the back edge of the server board. To assist in troubleshooting a system hang during the POST process, you can use the
  • Intel H2000 | Technical Product Specification - Page 151
    integrator to determine the proper shock level of the board and system if the system integrator chooses different system configuration or different chassis. Intel Corporation cannot be held responsible if components fail or the server board does not operate correctly when used outside any of its
  • Intel H2000 | Technical Product Specification - Page 152
    Intel® Server Board system will be operating at, can cause the fan control system to operate less efficiently, leading to higher system thermals and lower system the market. 9.1.4 Fan PWM Offset This option is reserved for manual adjustment to the minimum fan speed curves. The valid range is
  • Intel H2000 | Technical Product Specification - Page 153
    Intel® Server Board S2600JF TPS Environmental Limits Specification Note: The above feature may or may not be in effect and depends on the actual thermal characteristics of the specified system. 9.1.6 Thermal Sensor Input for Fan Speed Control The BMC uses various IPMI sensors as inputs to fan
  • Intel H2000 | Technical Product Specification - Page 154
    may affect the long-term reliability of the processor and system. The server board is designed to support the Intel® Xeon® Processor E5-2600 product family TDP guidelines up to and including 135W. Disclaimer Note: Intel Corporation server boards contain a number of high-density VLSI and power
  • Intel H2000 | Technical Product Specification - Page 155
    Intel®'s own DC power out requirements for a 1200W and 1600W power supply as used in an Intel® designed 2U server platform. The intent of this section is to provide customers with a guide of time peak power can be supported is based on thermal sensor and sharing in the standby rail. 10.2.3 Voltage
  • Intel H2000 | Technical Product Specification - Page 156
    Power Supply Specification Guidelines Intel® Server Board S2600JF TPS Table to protective earth ground. Resistance of the ground returns to chassis shall not exceed 1.0 m . This path may be on its outputs (Typically a leakage voltage through the system from standby output) up to 500mV. There shall
  • Intel H2000 | Technical Product Specification - Page 157
    Intel® Server 10 Soft Starting The Power Supply shall contain control circuit which provides monotonic soft start for its a power supply from an operating power system. During this process the output voltages shall operate in a hotswap/redundant 1+1 configurations. The 12VSBoutput is not required to
  • Intel H2000 | Technical Product Specification - Page 158
    Power Supply Specification Guidelines Intel® Server Board S2600JF TPS requirements for the power supply being turned on and off through the AC input, with PSON held low Max 70 * 1500 3000 400 5 500 Units ms ms ms ms ms ms ms ms ms ms 1000 ms ms 144 Revision 1.4 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 159
    Intel® Server Board S2600JF TPS AC Input Vout TAC_on_delay Tsb_on_delay PWOK Tpwok_on Tpwok_holdup Power Supply Specification Guidelines Tvout_holdup Tpwok_off cycle PSON turn on/off cycle Figure 48. Turn On/Off Timing (Power Supply Signals) Revision 1.4 145 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 160
    board, AC power must be removed. With AC power plugged into the server board, 5V standby is still present even though the server board is powered off.  This server board supports The Intel® Xeon® Processor E5-2600 product family with a Thermal Design Power (TDP) of up to and including 135 Watts
  • Intel H2000 | Technical Product Specification - Page 161
    Intel® Server Board S2600JF TPS Appendix B: Integrated BMC Sensor Tables Appendix B: Integrated BMC Sensor Tables This appendix lists the sensor identification numbers and information about the sensor type, name, supported Codes manually or automatically. This column indicates the type supported
  • Intel H2000 | Technical Product Specification - Page 162
    Intel® Server Board S2600JF TPS A: Auto-rearm M: Manual controls the behavior of the front panel status LED.  Standby Some sensors operate on standby power. These sensors may be accessed and/or generate events when the main (system) power is off, but AC power is present. 148 Revision 1.4 Intel
  • Intel H2000 | Technical Product Specification - Page 163
    Intel® Server Board S2600JF TPS Appendix B: Integrated BMC Sensor Tables Table 92. BMC Event/ Event Offset Triggers Reading Type Contrib. To System Status Sensor Specific 6Fh 00 - Power down 02 - 240 VA power down 04 - A/C lost 05 - Soft power control failure 06 - Power unit failure 00 -
  • Intel H2000 | Technical Product Specification - Page 164
    Integrated BMC Sensor Tables Intel® Server Board S2600JF TPS Full Sensor Name (Sensor name in SDR) IPMI Watchdog (IPMI Watchdog) Physical Security (Physical Scrty) FP Interrupt (FP NMI Diag Int) SMI Timeout (SMI Timeout) System Event Log (System Event Log) System Event (System Event) Button Sensor
  • Intel H2000 | Technical Product Specification - Page 165
    Intel® Server Board S2600JF TPS Appendix B: Integrated BMC Sensor Tables Full Sensor Name (Sensor name in SDR) SSB Thermal Trip (SSB Therm Trip) IO Module Presence (IO Mod Presence) SAS Module Presence (SAS Mod Presence) BMC Firmware Health (BMC FW Health) System Airflow (System Airflow) Sensor #
  • Intel H2000 | Technical Product Specification - Page 166
    Appendix B: Integrated BMC Sensor Tables Intel® Server Board S2600JF TPS Full Sensor Name (Sensor name in SDR) ) Platform Sensor Type Applicability Event/ Event Offset Triggers Reading Type Contrib. To System Status All Version OEM 1. 0x00hUpd OK Change(0x2B) defined(0x7 ate started
  • Intel H2000 | Technical Product Specification - Page 167
    Intel® Server Board S2600JF TPS Appendix B: Integrated BMC Sensor Tables Full Sensor Name ( Mod Temp) Exit Air Temperature 2Eh (Exit Air Temp) Network Interface Controller Temperature (LAN NIC Temp) Fan Tachometer Sensors (Chassis specific sensor names) 2Fh 30h-3Fh Fan Present Sensors (Fan x
  • Intel H2000 | Technical Product Specification - Page 168
    Integrated BMC Sensor Tables Intel® Server Board S2600JF TPS Full Sensor Reading Type Contrib. To System Status Chassisspecific Chassisspecific Chassisspecific A/C lost 06 - Configuration error 00 - Presence 01 - Failure 02 - Predictive Failure 03 - A/C lost 06 - Configuration error [u] [c,nc]
  • Intel H2000 | Technical Product Specification - Page 169
    Intel® Server Board Event Offset Triggers Reading Type Contrib. To System Status Sensor Specific 6Fh 00 - Drive Presence Control % (P1 Therm Ctrl %) Processor 2 Thermal Control % (P2 Therm Ctrl %) Processor 1 ERR2 Timeout (P1 ERR2) Processor 2 ERR2 Timeout (P2 ERR2) Revision 1.4 69h - Chassis
  • Intel H2000 | Technical Product Specification - Page 170
    Appendix B: Integrated BMC Sensor Tables Intel® Server Board S2600JF TPS Full Sensor Name (Sensor name in SDR - Limit exceeded All Temperature 01h Digital Discrete 05h 01 - Limit exceeded Contrib. To System Status fatal fatal Fatal fatal Non-fatal Non-fatal Non-fatal Non-fatal Non-fatal
  • Intel H2000 | Technical Product Specification - Page 171
    Intel® Server Board S2600JF TPS Appendix 01h Chassis- Fan specific 04h Chassis- Fan specific 04h Chassis- Fan specific 04h Chassis- 03h [u,l] [c,nc] 01 - State Asserted 01 - State Asserted Contrib. To System Status Non-fatal Non-fatal Non-fatal Non-fatal Non-fatal nc = Degraded c
  • Intel H2000 | Technical Product Specification - Page 172
    Appendix B: Integrated BMC Sensor Tables Intel® Server Board S2600JF TPS Full Sensor Name ( D3h All Voltage 02h Voltage 02h Threshold 01h Threshold 01h [u,l] [c,nc] [u,l] [c,nc] Contrib. To System Status Assert/ Readable Event De- Value/Off Data assert sets - - Analog R, T - -
  • Intel H2000 | Technical Product Specification - Page 173
    Intel® Server Board S2600JF TPS Appendix B: Integrated BMC Sensor Tables Full Sensor nc] [u,l] [c,nc] [u,l] [c,nc] [u,l] [c,nc] [u,l] [c,nc] [u,l] [c,nc] Threshold 01h [u,l] [c,nc] Contrib. To System Status nc = Degraded c = Non-fatal nc = Degraded c = Non-fatal nc = Degraded c = Non-fatal nc =
  • Intel H2000 | Technical Product Specification - Page 174
    Tables Intel® Server Board support redundancy (for instance, fan or power supply). 2. This is only applicable when the system does not support redundant fans. When fan redundancy is supported, then the contribution to system state is driven by the fan redundancy sensor. 160 Revision 1.4 Intel
  • Intel H2000 | Technical Product Specification - Page 175
    Intel® Server Board S2600JF TPS Appendix C: BIOS Sensors and SEL Data Appendix C: BIOS Sensors and SEL on DIMM 0-3 = Rank Number ED3 = [7:5]= Socket ID 0-3 = CPU1-4 [4:3] = Channel 0-3 = Channel A-D for Socket [2:0] = DIMM 0-2 = DIMM 1-3 on Channel Revision 1.4 161 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 176
    Appendix C: BIOS Sensors and SEL Data Intel® Server Board S2600JF TPS Sensor Name Memory RAS Configuration Status Memory ECC Error Legacy PCI Error Sensor Number 02h Sensor Owner (GID) 01h (BIOS POST) Sensor Type 0Ch (Memory) 02h 33h (SMI Handler) 0Ch (
  • Intel H2000 | Technical Product Specification - Page 177
    Intel® Server Abort 3h = Unsupported Request 4h = Poisoned TLP 5h = Flow Control Protocol 6h = Completion Timeout 7h = Receiver Buffer Overflow 8h = Header Log Overflow 6Fh (Sensor Specific Offset) 0h = System Firmware Error (POST Error Code) 72h (OEM Discrete) Offset Reserved Event Data 2 Event
  • Intel H2000 | Technical Product Specification - Page 178
    Appendix C: BIOS Sensors and SEL Data Intel® Server Board S2600JF TPS Sensor Name (see Sensor 17h CSI PHY detected latency buffer rollover 5h = CSI PHY Init Failure 6h = CSI Link Layer generic control error (buffer overflow/underflow, credit underflow and so on.) 7h = Parity error in link or PHY
  • Intel H2000 | Technical Product Specification - Page 179
    Intel® Server Board S2600JF TPS Appendix C: BIOS Sensors and SEL Data Sensor Name Sparing State) 0h = Fully Redundant 2h = Redundancy Degraded 09h (Digital Discrete) 0h = RAS Configuration Disabled 1h = RAS Configuration Enabled Event Data 2 Event Data 3 ED2 = [7:4] = Sparing Domain 0-3 = Channel
  • Intel H2000 | Technical Product Specification - Page 180
    Appendix C: BIOS Sensors and SEL Data Intel® Server Board S2600JF TPS Sensor Name Memory Parity Error Sensor Number 13h for Socket [1:0] = DIMM 0-2 = DIMM 1-3 on Channel ED2 = [7:0] = Bus Number ED3 = [7:3] = Device Number [2:0] = Function Number 166 Revision 1.4 Intel order number G31608-005
  • Intel H2000 | Technical Product Specification - Page 181
    Intel® Server Board S2600JF TPS Appendix C: BIOS Sensors and SEL Data Sensor Name QPI Fatal Error (continuation of Sensor 07h) System Event System Event Sensor Number 17h Sensor Owner (GID) 33h (SMI Handler) Sensor Type 13h (Critical Interrupt) Event/Reading Type Offset Values 74h (OEM
  • Intel H2000 | Technical Product Specification - Page 182
    Intel® Server Board S2600JF TPS Appendix D: Node Manager 2.0 IPMI Integrated Sensors The following is a list of all Node Manager (NM) 2.0 sensors that are typically integrated into the Sensor Data Records on EPSD Boards Based on Intel® Xeon® Processor E5-4600/2600/2400/1600/1400 Product Families
  • Intel H2000 | Technical Product Specification - Page 183
    Intel® Server Board S2600JF TPS Appendix D: Node Manager 2.0 IPMI Integrated Sensors Full Sensor Name Sensor (Sensor name in SDR) Value/ Offsets Analog Event Data Reading Threshold Note 1: For data in ED2 and ED3, see Intel® Intelligent Power Node Manager 2.0 specification. Revision 1.4 169
  • Intel H2000 | Technical Product Specification - Page 184
    , each of which is assigned a specific hex POST code number. As each configuration routine is started, the BIOS displays the POST code on the POST code diagnostic LEDs found on the back edge of the server board. To assist in troubleshooting a system hang during the POST process, the diagnostic LEDs
  • Intel H2000 | Technical Product Specification - Page 185
    Intel® Server Board S2600JF TPS Appendix E: POST Code LED Decoder Table 95. POST Progress Code LED Example Programming timing parameters in the memory controller 0 0 1 0 0 1 0 1 Configuring memory parameters in the memory controller 0 0 1 0 0 1 1 0 Optimizing memory controller settings 0 0 1 0
  • Intel H2000 | Technical Product Specification - Page 186
    Code LED Decoder Intel® Server 1 0 1 Reserved for PCI bus USB 0 1 0 1 0 1 1 0 Initializing USB host controllers 0 1 0 1 0 1 1 1 Detecting USB devices 0 1 0 1 1 0 0 0 the presence of ATA device 0 1 0 1 1 1 0 0 Enable SMART if supported by ATA device 0 1 0 1 1 1 0 1 Reserved for ATA SMBus* 0
  • Intel H2000 | Technical Product Specification - Page 187
    Intel® Server Board S2600JF TPS Appendix E: POST Code controller (VGA) 0 1 1 1 0 0 0 1 Disabling the video controller (VGA) 0 1 1 1 0 0 1 0 Enabling the video controller (VGA) 0 1 1 1 0 0 1 1 Reserved for video controller ) 1 0 1 1 0 0 1 1 Enabling/configuring a fixed media device 1 0 1 1 0 1
  • Intel H2000 | Technical Product Specification - Page 188
    Appendix E: POST Code LED Decoder Intel® Server Board S2600JF TPS Checkpoint LED 0xD0 0 0 0 1 0 Initial memory found, configured, and installed correctly 1 1 1 0 0 0 1 1 Transfer control to the DXE Core PEI Modules 1 1 1 1 0 0 0 0 Install PEIM for Platform Status Codes 1 1 1 1 0 0 0 1 Detecting
  • Intel H2000 | Technical Product Specification - Page 189
    . Processor 0x family mismatch detected. Processor 0x Intel® QPI speed mismatch. Processor 0x model mismatch. Processor 0x speeds mismatched. Processor 0x family is not supported. Processor and chipset stepping configuration is unsupported. CMOS/NVRAM Configuration Cleared Passwords cleared
  • Intel H2000 | Technical Product Specification - Page 190
    F: Video POST Code Errors Intel® Server Board S2600JF TPS Error Code 5224 8160 8161 controller failed self-test Baseboard management controller failed to respond Baseboard management controller in update mode Sensor data record empty System event log full Memory component could not be configured
  • Intel H2000 | Technical Product Specification - Page 191
    Intel® Server Board S2600JF TPS Appendix F: Video POST Code Errors Error Code a resource conflict error Serial Port controller error Serial Port component encountered an encountered an illegal software state error. DXE boot services driver component encountered an illegal software state error.
  • Intel H2000 | Technical Product Specification - Page 192
    Code Errors Intel® Server Board S2600JF TPS Error Code 96AB 96E7 0xA000 0xA001 0xA002 0xA003 0xA022 0xA027 0xA028 0xA421 0xA500 0xA501 0xA5A0 0xA5A1 0xA5A4 0xA6A0 0xB6A3 Error Message DXE boot services driver component encountered an invalid configuration ATA bus SMART not supported. ATA/ATPI ATA
  • Intel H2000 | Technical Product Specification - Page 193
    multiple chassis.) Common Enabling Kit Challenge Handshake Authentication Protocol In terms of this specification, this describes the PC-AT compatible region of battery-backed 128 bytes of memory, which normally resides on the server board. Data Center Management Interface Dynamic Host Configuration
  • Intel H2000 | Technical Product Specification - Page 194
    Intel® Server Bus Intel® Architecture Input Buffer I/O Controller Hub Intelligent Chassis Management Logical Unit Number Media Access Control 1024KB Management Engine Message Control Interface Platform Event Filtering Platform Event Paging Platform Information Area (This feature configures
  • Intel H2000 | Technical Product Specification - Page 195
    Intel® Server Board S2600JF TPS Term QPI RAM RASUM RISC ROM RTC RMM3 SDR SECC SEEPROM SEL SIO SMBus* SMI SMM SMS SNMP TBD TDP TIM UART UDP UHCI URS UTC UUID VID VRD VT Word ZIF QuickPath Interconnect Definition Random Access Memory Reliability, Availability, Serviceability, Usability, and
  • Intel H2000 | Technical Product Specification - Page 196
    .5, rev.0.79. 2007, Intel Corporation.  Intel® Server System Integrated Baseboard Management Controller Core External Product Specification, 2007 Intel Corporation.  Intel® Thurley Server Platform Services IPMI Commands Specification, 2007. Intel Corporation.  Intel® Server Safety and Regulatory
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
Intel
®
Server Board S2600JF
Technical Product Specification
Intel order number G31608-005
Revision 1.4
September 2012
Enterprise Platforms and Services Division - Marketing