Intel H2000 Technical Product Specification - Page 40

Table 9. Intel, Server Board S2600JF SATA/SAS port, Table 10. Intel, RAID C600 Storage Upgrade Key

Page 40 highlights

Product Architecture Overview Intel® Server Board S2600JF TPS Intel® Server Board S2600JF implements six SATA/SAS ports. The implementation is as follows: Table 9. Intel® Server Board S2600JF SATA/SAS port Port# 0 1 0 1 SCU0 2 3 Speed 6Gb/s SATA 6Gb/s SATA 3Gb/s SATA/SAS(non-AHCI) Connector Bridge Board Slot On Server board Bridge Board Slot There are two embedded software RAID options using the storage ports configured from the SCU only:  Intel® Embedded Server RAID Technology 2 (ESRT2) based on LSI* MegaRAID SW RAID technology supporting SATA RAID levels 0,1,10, 5.  Intel® Rapid Storage Technology (RSTe) supporting SATA RAID levels 0,1,5,10. The server board is capable of supporting additional chipset embedded SAS and RAID options from the SCU controller when configured with one of several available Intel® RAID C600 Storage Upgrade Keys. Upgrade keys install onto a 4-pin connector on the server board labeled "STOR UPG Key". The following table identifies available upgrade key options and their supported features. Table 10. Intel® RAID C600 Storage Upgrade Key Options for S2600JF Intel® RAID C600 Upgrade Key Options (Intel® Product Codes) Default - No option key installed RKSATA4R5 RKSAS4 RKSAS4R5 Key Color NA Black Green Yellow Description 4 Port SATA with Intel® ESRT RAID 0,1,10, and Intel® RSTe RAID 0,1,5,10 4 Port SATA with Intel® ESRT2 RAID 0,1, 5, 10, and Intel® RSTe RAID 0,1,5,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 10, and Intel® RSTe RAID 0,1,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 5, 10, and Intel® RSTe RAID 0,1,10 Note: The eight-port Storage Upgrade Key can also implement the RAID function, but only four ports (SCU0) are user accessible on Intel® Server Board S2600JF. Additional information for the on-board RAID features and functionality can be found in the Intel® RAID Software Users Guide (Intel® Document Number D29305). 3.4.5 PCI Interface The Intel® C600 PCH PCI Interface provides a 33 MHz, Revision 2.3 implementation. It integrates a PCI arbiter that supports up to four external PCI bus masters in addition to the PCH internal requests. This allows for combinations of up to four PCI down devices and PCI slots. 26 Revision 1.4 Intel order number G31608-005

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

Product Architecture Overview
Intel®
Server Board S2600JF TPS
Revision 1.4
Intel order number G31608-005
26
Intel
®
Server Board S2600JF implements six SATA/SAS ports. The implementation is
as follows:
Table 9. Intel
®
Server Board S2600JF SATA/SAS port
Port#
Speed
Connector
0
6Gb/s SATA
Bridge Board Slot
1
6Gb/s SATA
On Server board
SCU0
0
3Gb/s SATA/SAS(non-AHCI)
Bridge Board Slot
1
2
3
There are two embedded software RAID options using the storage ports configured from the
SCU only:
Intel
®
Embedded Server RAID Technology 2 (ESRT2) based on LSI* MegaRAID SW
RAID technology supporting SATA RAID levels 0,1,10, 5.
Intel
®
Rapid Storage Technology (RSTe) supporting SATA RAID levels 0,1,5,10.
The server board is capable of supporting additional chipset embedded SAS and RAID options
from the SCU controller when configured with one of several available Intel
®
RAID C600
Storage Upgrade Keys. Upgrade keys install onto a 4-pin connector on the server board labeled
STOR UPG
Key”. The following
table identifies available upgrade key options and their
supported features.
Table 10. Intel
®
RAID C600 Storage Upgrade Key Options for S2600JF
Intel
®
RAID C600 Upgrade Key Options
(Intel
®
Product Codes)
Key Color
Description
Default
No option key installed
NA
4 Port SATA with Intel
®
ESRT RAID
0,1,10, and Intel
®
RSTe RAID 0,1,5,10
RKSATA4R5
Black
4 Port SATA with Intel
®
ESRT2 RAID
0,1,
5
, 10, and
Intel
®
RSTe RAID 0,1,5,10
RKSAS4
Green
4 Port SAS with Intel
®
ESRT2 RAID 0,1, 10, and
Intel
®
RSTe RAID 0,1,10
RKSAS4R5
Yellow
4 Port SAS with Intel
®
ESRT2 RAID 0,1,
5
, 10, and
Intel
®
RSTe RAID 0,1,10
Note:
The eight-port Storage Upgrade Key can also implement the RAID function, but only four ports (SCU0) are
user accessible on Intel
®
Server Board S2600JF.
Additional information for the on-board RAID features and functionality can be found in the
Intel
®
RAID Software Users Guide
(Intel
®
Document Number D29305).
3.4.5
PCI Interface
The Intel
®
C600 PCH PCI Interface provides a 33 MHz, Revision 2.3 implementation. It
integrates a PCI arbiter that supports up to four external PCI bus masters in addition to the PCH
internal requests. This allows for combinations of up to four PCI down devices and PCI slots.