Intel MFSYS25 User Guide - Page 118

Intel® Storage Control Module Details The tabs displayed below the system graphic provide detailed information for the selected storage control module. For a description of these tabs, refer to the following table. Table 27. Storage Control Module Tabs Tab Heading Description General Events Expansion Port The General tab displays: • Current status of the selected storage control module (i.e., status, health, boot state, master state, battery state) • Product data information, including manufacturer, firmware revision, serial number, product ID, etc. Displays all events for the selected Intel® Storage Control Module. Displays the expansion port access table. Battery Displays the battery property table, which includes battery status, temperature, remaining capacity percentage, cycle count, voltage, current, cell type, estimated hold time, etc. Background Tasks (displayed if an action is occurring on a virtual drive) Lists any Active Tasks currently involving the virtual drive, such as creating, expanding, rebuilding, or migration. Intel® Storage Control Module Help To quickly access additional help regarding the Intel® Storage Control Module screen, actions, and tabs, click on the Get Help button in the Storage Control Module help box located under the actions box. Intel® Management Module The Intel® Management Module, installed in the middle bay (labeled CMM1) of the rear of the system, provides the Intel® Modular Server Control UI that is used to configure and manage the modular server system hardware. This module is not redundant, but the system will continue to operate normally should this module fail. However, configuration changes cannot be made until a failed Intel® Management Module is replaced. The Intel® Modular Server Control UI enables an IT Administrator to reset the Intel® Management Module, view health information, and view product details. To view current status, available actions, and product details for the installed Intel® Management Module, click the Chassis Back tab in the top menu to display the back of the system and select the management module from the system graphic. The content displayed on the informational tabs, action box, and help box will be updated with product-specific information and available actions for the management module highlighted in green. The current health and product summary information is quickly available by moving the mouse over the Health/ Information icon located on the management module graphic. 102 Intel® Modular Server System User Guide