Intel MFSYS25 User Guide - Page 138
Steps to change the Time Zone, Simple Network Management Protocol (SNMP), SNMP Options
UPC - 735858196901
View all Intel MFSYS25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
2. Enter the IP address or DNS hostname for the network time server. 3. Click Save Changes. In the Update dialogue box Update and Reboot. This action will reset the management module to enable the changes to take effect. Steps to change the Time Zone 1. Click Settings > Date/Time in the left navigation panel. 2. Select the Time Zone to be used for displaying the date and time. 3. Click Save Changes. In the Update dialogue box Update and Reboot. This action will reset the management module to enable the changes to take effect. Simple Network Management Protocol (SNMP) The Intel® Modular Server System MFSYS25/MFSYS35 supports Simple Network Management Protocol (SNMP). An IT administrator can view system configuration settings and health information using either SNMP v2 or SNMP v3. However, an IT administrator cannot configure the Intel® Modular Server via SNMP. Full hardware management and configuration is supported via the Intel® Modular Server Control interface. For more information regarding SNMP v2 and SNMP v3 support for the installed Unified Firmware Update (UFU) release, refer to the Unified Firmware Update (UFU) Release Notes. SNMP Options The Simple Network Management Protocol (SNMP) settings allow external SNMP management applications to communicate with the SNMP agent on the Management Module. The SNMP Options must be configured in order to use SNMP v2, SNMP v3, or both SNMP v2 and SNMP v3. 122 Intel® Modular Server System User Guide