Intel P4000L Service Guide - Page 52
Removing and Installing the Hot-swap Fan
View all Intel P4000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Hardware Installations and Upgrades 6. Install the fixed fan in the corresponding fan bracket (see letter "B"). Figure 38. Installing the Fixed Fan 7. Connect fan power cable to the server/workstation board. See the Quick Start User's Guide or Service Guide provided with your Intel server/workstation board for appropriate connection location. Removing and Installing the Hot-swap Fan / NOTE This procedure applies only to the Intel® Server System P400IP family with hot-swap fan configuration. Removing the Hot-swap Fan 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Press latch on fan and pull on handle to remove hot-swap fan from chassis. 34 Intel® Server System P4000IP and Intel® Workstation System P4000CR Service Guide