Intel P4000M Technical Product Specification - Page 130
U 8x2.5, Hot-Swap Back Plane HSBP
View all Intel P4000M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Hot-Swap Back Plane (HSBP) Intel® Server Chassis P4000M Family TPS MTH4 MTH5 MTH6 GND16 GND17 GND18 Description GND GND GND Table 159.1x3 SATA 6X Host Jumper - Pin 1 2 3 Description 1x3 SATA 6X Host Jumper Header Signal Name P3V3 SATA_6X_MODE TP_PIN3 5.2.4 8x3.5" HSBP Cabling Requirements The 8x 3.5" HSBP requires the following cables: 1. Up to two Ganged Mini SAS to 4pcs 7Pin SATA cable with SGPIO Cable. 2. I2C cable - 5pin on HSBP side to 3pin on baseboard side. 5.3 4U 8x2.5" Hot-Swap Back Plane (HSBP) 5.3.1 Overview The chassis supports 8x2.5" SAS/SATA backplane. The backplane provide the platform support for up to eight hot-swap SAS or SATA hard drives. 5.3.1.1 Key Features The 8HDD 2.5" SAS/SATA HSBP supports the following feature set: 8x SAS/SATA 2.5" hot swap hard drives. Two SGPIO SFF-8485 interfaces in sideband of mini-SAS connectors. One I2C interface from a 5pin connector for HDD status communication to BMC over slave SMB bus. Temperature sensor and FRU support. In-application FW updateable over I2C interface from BMC. No special hardware needed for field FW upgrade with BMC onboard EPSD baseboard. 8 HDD status LEDs and 8 HDD activity LEDs. 8 HDD presence detect inputs to the microcontroller. 3.3V linear regulator for to power microcontroller and various other components Two mini-SAS SAS/SATA input connectors. Eight 29pin SAS/SATA 'hybrid' docking hot-swap connectors. Mount board using one loose screw. 116 Intel order number G27488-004 Revision 1.1