Intel P4000M Technical Product Specification - Page 62

Chassis Power Sub-system Intel® Server Chassis P4000M Family TPS Refer to the Intel "Common Hardware & Firmware Requirements for CRPS Power Supplier" for detailed requirements. 2.2.9 Firmware Uploader The power supply has the capability to update its firmware from the PMBus* interface while it is in standby mode. This FW can be updated when in the system and in standby mode and outside the system with power applied to the 12Vstby pins. Refer to the Intel "Common Hardware & Firmware Requirements for CRPS Power Supplier" for detailed requirements. 2.3 460-W Power Supply This specification defines a 460W redundant power supply that supports server systems. The parameters of this power supply are defined in this specification. This specification defines a power supply with 2 outputs; 12V and 12V standby. The AC input shall be auto ranging and power factor corrected. 2.3.1 Mechanical Overview The physical size of the power supply enclosure is 39/40mm x 73.5mm x 185mm. The power supply contains a single 40mm fan. The power supply has a card edge output that interfaces with a 2x25 card edge connector in the system. The AC plugs directly into the external face of the power supply. Refer to the following figure. All dimensions are nominal. B25 A25 FCI 2x25 card edge connector 10035388-102 B1 A1 11mm Airflow direction Retention Latch 185mm 40mm fan 3mm 73.5m m 39mm 8.5mm Figure 33. Power Supply Outline Drawing 48 Intel order number G27488-004 Revision 1.1