Intel P4000M P4000M family Service Guide

Intel P4000M Manual

Get Intel P4000M PDF manuals and user guides View all Intel P4000M manuals
Add to My Manuals
Save this manual to your list of manuals

Intel P4000M manual content summary:

  • Intel P4000M | P4000M family Service Guide - Page 1
    Intel® Server Chassis P4000M Family Service Guide A Guide for Technically Qualified Assemblers of Intel® identified Subassemblies/Products Order Number: G30559-003
  • Intel P4000M | P4000M family Service Guide - Page 2
    Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. * Other names and brands may be claimed as the property of others. Copyright © 2012 Intel Corporation. All Rights Reserved. ii Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 3
    Intel® Server Deployment Toolkit 3.0 CD y/o en http://www.intel.com/support/motherboards/server/sb/cs-010770.htm. http://www.intel.com/support/motherboards/server/sb/cs-010770.htm 上的 Intel® Server Boards and Server Chassis Safety Information（《Intel Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 4
    the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. iv Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 5
    , troubleshooting information, and instructions on how to add and replace components on the Intel® Server Chassis P4000M family. For the latest version of this manual, refer to http://www.intel.com/p/en_US/support. Manual Organization Chapter 1 provides a brief overview of the Intel® Server Chassis
  • Intel P4000M | P4000M family Service Guide - Page 6
    Safety Information iii Preface ...v 1 Server Chassis Features 1 Chassis Features ...2 Component Identification 3 Hot Swap Hard Drive Bay Options and HDD Numbering 5 Front Panel ...8 Back Panel Backplane 30 Installing 4x3.5" Hot-swap Backplane 31 vi Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 7
    Alternate Serial Port 72 Installing and/or Removing a Expander card 73 Installing the Expander card 73 Removing the Expander card 74 Installing and/or Removing a Server/Workstation Board 75 Intel® Server Chassis P4000M Service Guide vii
  • Intel P4000M | P4000M family Service Guide - Page 8
    Warranty for Intel® Chassis Subassembly Products 91 Extent of Limited Warranty 91 Warranty Limitations and Exclusions 91 Limitations of Liability 92 How to Obtain Warranty Service 92 Telephone Support 92 Returning a Defective Product 92 viii Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 9
    . Installing the EMI shield 29 Figure 42. Installing the 4x3.5'' Hot-Swap Hard Drive Cage 29 Figure 43. 4x3.5'' Hot Swap Backplane Cable Connections 30 Intel® Server Chassis P4000M Service Guide ix
  • Intel P4000M | P4000M family Service Guide - Page 10
    the 2.5'' HDD in Carrier 48 Figure 72. Installing the 2.5" HDD into the Chassis 49 Figure 73. Removing EMI Shield 49 Figure 74. Installing DVD or CD-ROM Module from Chassis 58 Figure 92. Installing Hot-swap Power Supply Module into Chassis 58 x Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 11
    70 Figure 112. Installing the Front Panel Tray in Chassis 70 Figure 113. Connecting the Cables to Server Board the Front Panel Tray in Chassis ......70 Figure 114. Removing the Front Panel Board 71 . RMM4 knockout 77 Figure 122. Mechanical Locks 77 Intel® Server Chassis P4000M Service Guide xi
  • Intel P4000M | P4000M family Service Guide - Page 12
    List of Tables List of Tables Table 1. Intel® Server Chassis P4000M family Base Features 2 Table 2. Front Panel LED Functionality 9 Table 3. Power Supply Output Voltages 79 Table 8. Power Usage Worksheet 80 Table 9. Power Usage Worksheet 2 81 xii Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 13
    List of Tables Intel® Server Chassis P4000M Service Guide xiii
  • Intel P4000M | P4000M family Service Guide - Page 14
    of the Intel® Server Chassis P4000M family. This chapter provides a list of the server chassis features, and diagrams showing the location of important components and connections on the server chassis. Figure 1. Chassis Front View for Fixed Hard Drive Intel® Server Chassis P4000M Service Guide 1
  • Intel P4000M | P4000M family Service Guide - Page 15
    2. Chassis Front View for Hotswap Hard Drive Chassis Features Table 1. Intel® Server Chassis P4000M family Base Features bays  Front Panel  Intel® Local Control Panel (Optional)  With Front Panel o NIC1 Activity o NIC2 Activity o NIC3 Activity 2 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 16
    RMM4 Knockout D. PCI Add-in Board Slot Covers E. AC Input Power Connector F. Serial Port Knockout G. A Kensington* Cable Lock Mounting Hole H. Padlock Loop I. Alternate RMM4 Knockout Intel® Server Chassis P4000M Service Guide 3
  • Intel P4000M | P4000M family Service Guide - Page 17
    System Fan 3 O. Hot-swap System Fan 2 P. 8x3.5'' Hot-swap HDD Cage Q. Hot-swap System Fan 1 R. PCI card retainer Figure 4. Internal Chassis View of Intel® Server Chassis P000M with Hot-swap Power Supply, Hot-swap Hard Drives and Hot-swap System Fans 4 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 18
    Server Chassis Features Hot Swap Hard Drive Bay Options and HDD Numbering Figure 5. 4x3.5'' Hot-Swap Drive Cage Intel® Server Chassis P4000M Service Guide 5
  • Intel P4000M | P4000M family Service Guide - Page 19
    Server Chassis Features Figure 6. 8x3.5'' Hot-Swap Drive Cage 6 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 20
    Server Chassis Features Figure 7. 8x2.5'' Hot-Swap Drive Cage Intel® Server Chassis P4000M Service Guide 7
  • Intel P4000M | P4000M family Service Guide - Page 21
    Features Figure 8. Two 8x2.5'' Hot-Swap Drive Cages Front Panel The Intel® Server Chassis P4000M family uses a common front control panel. The layout of the front control panel is as shown in below figure. Figure 9. Front Panel Controls and Indicators 8 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 22
    details about front panel functions supported for a specific board, refer to the individual server board specifications. Back Panel The following figure shows the layout of back panel with fixed power supply and hot-swap redundant power supplies: Intel® Server Chassis P4000M Service Guide 9
  • Intel P4000M | P4000M family Service Guide - Page 23
    Server Chassis Features A Fixed Power Supply F Serial-B Port (Optional) B IO Connectors G Kensington* Cable Lock Mounting Hole C RMM4 NIC/1394B Optional) F RMM4 NIC/1394B Port/(Optional) Figure 11. Back Panel Layout (with Hot-swap Power Supply) 10 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 24
    Server Chassis Features Hot-swap SAS/SATA Backplane The Hot-swap SAS/SATA backplane serves as an interface between the motherboard and the system drives. The following diagrams show Connector F. SGPIO Connector Figure 12. 4x3.5'' HSBP Board (Rear View) Intel® Server Chassis P4000M Service Guide 11
  • Intel P4000M | P4000M family Service Guide - Page 25
    Chassis Features G. SATA/SAS Hot-swap Drive Connectors Figure 13. 4x3.5'' HSBP Board Layout (Front View) 8x3.5'' Hard Drive Backplane A. SATA 6X Mode B. Power Connectors C. MINI_SAS Connectors D. I2C Connector Figure 14. 8x3.5'' HSBP Board (Rear View) 12 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 26
    Chassis Features E. SATA/SAS Hot-swap Drive Connectors Figure 15. 8x3.5'' HSBP Board (Front View) 8x2.5'' Hard Drive Backplane A. I2C_OUT Connector B. MINI_SAS Connectors C I2C_IN Connector D. Power Connectors Figure 16. 8x2.5'' HSBP Board (Front View) Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 27
    Server Chassis Features E. SATA/SAS Hot-swap Drive Connectors Figure 17. 8x3.5'' HSBP Board (Front View) 14 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 28
    of this book. 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Disconnect the AC power cord. 4. Remove the screws (see letter A). 5. Slide the side cover back (see letter B) and lift the cover outward to remove it. Intel® Server Chassis P4000M Service Guide 15
  • Intel P4000M | P4000M family Service Guide - Page 29
    the Chassis Cover Installing the Chassis Cover 1. Slide the chassis cover on the chassis (see letter A). 2. Latch the cover securely to the chassis. 3. Secure the chassis cover with the screws (see letter B). Figure 19. Installing the Chassis Cover 16 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 30
    the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". chassis. 2. Engage the plastic bezel hooks (see letter A) into the raised metal slots at the chassis edge. Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 31
    and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Install the airduct by matching the alignment tabs on airduct and the alignment holes on chassis bracket. 18 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 32
    to the Intel® Server Chassis P4000M family with fixed fan configuration. Removing the Fixed Fan 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. Intel® Server Chassis P4000M Service Guide 19
  • Intel P4000M | P4000M family Service Guide - Page 33
    AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Remove the air duct if the air duct is installed. For instructions, see "Removing the Airduct". 5. fan connector should be installed in fan 1 bracket. 20 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 34
    this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Press latch on fan and pull on handle to remove hot-swap fan from chassis. Intel® Server Chassis P4000M Service Guide 21
  • Intel P4000M | P4000M family Service Guide - Page 35
    NOTE For a rack configuration or chassis on its side, position the chassis hanging over the edge of a table or workbench before removing the bezel. This procedure applies only to the Intel® Server chassis P4000M family with fixed HDD configuration. 22 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 36
    against the sides of the chassis (see letter A). 2. While pressing the clip (see letter B), slide the EMI Shield downwards until the latches on the EMI Shield are engaged with the chassis (see letter C). Figure 30. Installing the Fixed HDD EMI Shield Intel® Server Chassis P4000M Service Guide 23
  • Intel P4000M | P4000M family Service Guide - Page 37
    the Intel® Server Chassis P4000M family with fixed HDD configuration. Removing Fixed Hard Drive(s) 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions
  • Intel P4000M | P4000M family Service Guide - Page 38
    the Chassis Cover". 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 5. Remove the Fixed HDD EMI shield. For instructions, see "Removing the Fixed HDD EMI Shield". 6. Pull out the HDD carrier tray. Intel® Server Chassis P4000M Service Guide 25
  • Intel P4000M | P4000M family Service Guide - Page 39
    carrier tray with screws. Figure 36. Securing the 3.5" HDD on Fixed HDD Carrier Tray Figure 37. Securing the 2.5" HDD on Fixed HDD Carrier Tray 26 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 40
    instructions, see "Removing the Front Bezel". 5. Disconnect the power and data cables to the backplane. 6. Use screwdriver to release the hot-swap hard drive cage (see letter A) from the chassis and remove the hot-swap hard drive cage (see letter B). Intel® Server Chassis P4000M Service Guide 27
  • Intel P4000M | P4000M family Service Guide - Page 41
    Cover". 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 5. Install the hot-swap EMI HDD shield under the hot-swap cage. 1) Fit the edges of the EMI shield against the sides of the chassis (see letter A). 28 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 42
    card for instructions on connecting backplane cables to your server board or RAID controller card. 1) Connect data cables (letter A). 2) Connect an I2C_IN cable (letter "B`"). 3) Connect an SGPIO cable (letter C). 4) Connect power cable (letter D). Intel® Server Chassis P4000M Service Guide 29
  • Intel P4000M | P4000M family Service Guide - Page 43
    4x3.5'' Hot-swap Hard drives cage. For instructions, see "Removing 4x3.5'' Hot-swap Hard Drive Cage". 6. Remove the screw on the backplane (see letter A). 7. Push the backplane (see letter B) and remove the backplane from the chassis (see letter C). 30 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 44
    C). Figure 45. Installing 4x3.5" Hot-swap Backplane 8. Install the 4x3.5'' Hot-swap Hard drives cage. For instructions, see "installing 4x3.5'' Hot-swap Hard Drive Cage". 9. Install the front bezel. For instructions, see "Installing the Front Bezel". Intel® Server Chassis P4000M Service Guide 31
  • Intel P4000M | P4000M family Service Guide - Page 45
    . For instructions, see "Installing the Chassis Cover". 11. Plug all peripheral devices and the AC power cable into the server. 12. Power up the server. Removing and Installing 8x3.5'' Hot-swap Hard Drive Cage Assembly NOTE This procedure applies only to the Intel® Server Chassis P4000M family with
  • Intel P4000M | P4000M family Service Guide - Page 46
    instructions on connecting backplane cables to your server board or RAID controller card. 1) Connect an I2C cable (letter A). 2) Connect Mini SAS data cables (letter B). 3) Connect power cable (letter C). Figure 48. 8x3.5'' Hot Swap Backplane Cable Connections Intel® Server Chassis P4000M Service
  • Intel P4000M | P4000M family Service Guide - Page 47
    cover. For instructions, see "Installing the Chassis Cover". 10. Plug all peripheral devices and the AC power cable into the server. 11. Power up the server. Removing and Installing 8x3.5'' Hot-swap Backplane NOTE This procedure applies only to the Intel® Server Chassis P4000M family with 8x3
  • Intel P4000M | P4000M family Service Guide - Page 48
    power cable into the server. 9. Power up the server. Removing and Installing 8x2.5'' Hot-swap Hard Drive Cage Assembly NOTE This procedure applies only to the Intel® Server Chassis P4000M family with 8x2.5'' hot-swap hard disk drive cage configuration. Intel® Server Chassis P4000M Service Guide 35
  • Intel P4000M | P4000M family Service Guide - Page 49
    . For instructions, see "Removing the Front Bezel (Pedestal Only)". 5. Install the 8x2.5'' Hot-Swap Hard Drive Cage. 1) Slide the 8x2.5" Hot-Swap Drive Cage into the slot (see letter A). 2) Secure the Hard Drive Cage with the Screw (see letter B). 36 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 50
    the air duct is removed. For instructions, see "Installing the Airduct" 9. Install the chassis cover. For instructions, see "Installing the Chassis Cover". 10. Plug all peripheral devices and the AC power cable into the server. 11. Power up the server. Intel® Server Chassis P4000M Service Guide 37
  • Intel P4000M | P4000M family Service Guide - Page 51
    applies only to the Intel® Server Chassis P4000M family with 8x2.5'' hot-swap chassis (see letter A). 2. While pressing the EMI Shield, slide the EMI Shield downwards until the latches on the EMI Shield are engaged with the chassis (see letter B). 38 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 52
    (Pedestal Only)". 5. Disconnect the power and data cables to the backplane. 6. Use screwdriver to release the hot-swap hard drive cage (see letter A) from the chassis and remove the hot-swap hard drive cage (see letter B). Intel® Server Chassis P4000M Service Guide 39
  • Intel P4000M | P4000M family Service Guide - Page 53
    power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel Installing the Second 8x2.5'' Hot-swap Hard Drive Cage Assembly 40 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 54
    and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel (Pedestal Only)". Intel® Server Chassis P4000M Service Guide 41
  • Intel P4000M | P4000M family Service Guide - Page 55
    Hardware Installations and Upgrades 5. Remove the 8x2.5'' Hot-swap Hard drives cage. For instructions, see "Removing 8x2.5'' Hot-swap Hard Drive Cage Assembly". 6. Remove the screw on see letter B) and secure the backplane with the screw (see letter C). 42 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 56
    ® Server Chassis P4000M family with 3.5'' hot-swap hard disk drive cage configuration. 1. Open the Hot-swap HDD door 2. Remove the drive carrier by pressing the green button and opening the lever (see letter A). Then slide the carrier out (see letter B). Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 57
    4. Install the 3.5" hard disk drive using the same four screws as shown. Make sure the connector end of the drive matches the backplane connector. 44 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 58
    64. Sliding the 3.5" HDD Carrier into the Chassis 7. Close the HS HDD door. Installing 2.5" Hot-swap Hard Disk Drive in 3.5'' HDD Carrier 1. Remove the four screws securing the 3.5" HDD interface bracket and remove the 3.5" HDD interface bracket. Intel® Server Chassis P4000M Service Guide 45
  • Intel P4000M | P4000M family Service Guide - Page 59
    the screw holes with the right and left rail (See figure D). Secure the hard disk drive using the screws for the 2.5'' HDD (See figure E). 46 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 60
    . 2. Remove the drive carrier by pressing the green latch to unlock and pull out the black lever (see letter A). 3. Slide the carrier out (see letter B). Intel® Server Chassis P4000M Service Guide 47
  • Intel P4000M | P4000M family Service Guide - Page 61
    Hardware Installations and Upgrades Figure 69. Sliding the 2.5'' HDD Carrier from the chassis 4. Remove the four screws securing the plastic retention drive from the 2.5'' HDD carrier ( G). 9. Push in the lever to lock it into place (see letter "H"). 48 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 62
    the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 5. bay until the slides lock into place (see letter D). Intel® Server Chassis P4000M Service Guide 49
  • Intel P4000M | P4000M family Service Guide - Page 63
    power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front drive, reinsert an EMI shield into chassis (see below illustration). 50 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 64
    this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Remove the airduct if PCI card retainer all the way up (see letter C). Intel® Server Chassis P4000M Service Guide 51
  • Intel P4000M | P4000M family Service Guide - Page 65
    in board into an expansion slot on the server board. If using double width card, align the card edge to the guiding slot on the double width card fixture. See "Design A Double Width Card Extender" for additional information on using double width cards. 52 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 66
    . Figure 82. Closing the PCI Card Retainer 13. Attach cables if necessary. 14. Install the air duct if it is removed. For instructions, see "Installing the Airduct". 15. Install the chassis cover. For instructions, see "Installing the Chassis Cover". Intel® Server Chassis P4000M Service Guide 53
  • Intel P4000M | P4000M family Service Guide - Page 67
    and Upgrades 16. Plug all peripheral devices and the AC power cable into the server. 17. Power up the server. Design a Double Width Card Extender A GPGPU card bracket can help better secure Secure the Double Width card with Double Width Card bracket 54 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 68
    instructions, see "Installing the Airduct". 5. Disconnect all internal power cables from chassis components and server board. 6. Rotate the power supply locking device counter-clockwise (see letter A) and remove the fixed power supply (see letter B). Intel® Server Chassis P4000M Service Guide 55
  • Intel P4000M | P4000M family Service Guide - Page 69
    3. Install the air duct. For instructions, see "Installing the Airduct". 4. Install the chassis cover. For instructions, see "Installing the Chassis Cover". 5. Plug all peripheral devices and the AC power cable into the server. 6. Power up the server. 56 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 70
    the power supply. There are no user-serviceable parts inside it; servicing should be done by technically qualified personnel. 1. Observe the safety and ESD precautions at the beginning of this book. 2. Remove power cable from defective power supply. Intel® Server Chassis P4000M Service Guide 57
  • Intel P4000M | P4000M family Service Guide - Page 71
    power cables from chassis components and server board. 6. If present, press on green latch in the direction shown while pulling on handle to remove power supply from chassis. Repeat this step for the second hot-swap power supply if it is installed. 58 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 72
    board to the chassis (see letter A and B). Figure 94. Loosening the Bracket with Power Distribution Board from Chassis 8. Push the bracket forward to release the latch which secure the bracket then pull out the bracket from the chassis (see letter C). Intel® Server Chassis P4000M Service Guide 59
  • Intel P4000M | P4000M family Service Guide - Page 73
    Installations and Upgrades Figure 95. Removing the Bracket with Power Distribution Board from Chassis 9. Loosen screws securing the power distribution board to the bracket, and then board to the bracket using the same screws (see letter F). 60 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 74
    Power Distribution Board in Bracket 11. Slide the bracket with the new power distribution board all the way into the power supply cage (see letter G). Intel® Server Chassis P4000M Service Guide 61
  • Intel P4000M | P4000M family Service Guide - Page 75
    power cables as appropriate. 14. Insert the power supply(s) into the power supply cage and push all the way until it clicks into place. 62 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 76
    PDB bracket to the chassis. See letter A. Push the bracket forward to release the latch which secure the bracket then pull out the bracket from the chassis. See letter B. The figure shows the different PDB locations for 460-W/750-W PSU and 1200-W PSU. Intel® Server Chassis P4000M Service Guide 63
  • Intel P4000M | P4000M family Service Guide - Page 77
    letter A. Then secure the bracket with the screws. See letter B. The figure shows the different PDB locations for 460-W/750-W PSU and 1200-W PSU. 64 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 78
    and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Press the latches under the top cosmetic cover to release the cosmetic cover (see letter A) and remove the top cosmetic cover (see letter B). Intel® Server Chassis P4000M Service Guide 65
  • Intel P4000M | P4000M family Service Guide - Page 79
    Installing the Chassis Feet Removing the Chassis Feet 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Lay the chassis down on its right side. 66 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 80
    foot into chassis hole (see letter A). 5. Secure foot by inserting screw through the rubber foot (see letter B). 6. Repeat above steps until all four feet are installed. Figure 107. Installing the Chassis Feet 7. Put chassis in the upright position. Intel® Server Chassis P4000M Service Guide 67
  • Intel P4000M | P4000M family Service Guide - Page 81
    (see Letter A) and carefully slide the front panel out (see Letter B). CAUTION Do not slide the front panel out far from the front of the chassis before you disconnect the instruction cable from the front panel board. 68 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 82
    Cover". 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 5. Remove the air duct if it is installed. 6. Attach the front panel cable and the chassis intrusion cable (see Letter A) to the front panel board. Intel® Server Chassis P4000M Service Guide 69
  • Intel P4000M | P4000M family Service Guide - Page 83
    Panel Board 7. Slide the front panel tray in chassis Figure 112. Installing the Front Panel Tray in Chassis 8. Connect the front panel and USB cables to server board. Figure 113. Connecting the Cables to Server Board the Front Panel Tray in Chassis 70 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 84
    . Install the chassis cover. For instructions, see "Installing the Chassis Cover". 12. Plug all peripheral devices and the AC power cable into the server. 13. Power up the server. Replacing the the new front panel board with the screw (see letter B). Intel® Server Chassis P4000M Service Guide 71
  • Intel P4000M | P4000M family Service Guide - Page 85
    serial port knockout by pressing the knockout from inside the chassis. Figure 117. Removing the Alternate Serial Port Knockout 5. Install the serial port on the rear panel of the chassis. Connect the cable to the Serial B Connector on your motherboard. 72 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 86
    . For instructions, see "Remove Fixed Hard Drives", or "Remove 8x3.5 Hotswap Drive Cage Assemble", or "Remove 8x2.5 Hotswap Drive Cage Assemble". 6. Locate the expander card bracket in the chassis. Mount the expander card to the bracket with screws. Intel® Server Chassis P4000M Service Guide 73
  • Intel P4000M | P4000M family Service Guide - Page 87
    between expander and backplane(s). See documents for your server boards for instructions. 8. Install the Fixed HDDs or Hotswap drive cages. For instructions, see "Install Fixed Hard Drives", or expander card bracket by releasing the securing screws. 74 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 88
    is properly seated and then tighten the screws firmly, starting with the screws at the center of the server/workstation board. Make cable connections per instructions in the Intel® server/workstation board Service Guide and/or Quick Start User's Guide. Intel® Server Chassis P4000M Service Guide 75
  • Intel P4000M | P4000M family Service Guide - Page 89
    (that route toward the server/workstation board) to the chassis. 2. See your Intel® Server/Workstation Board Service Guide or Quick Start User's Guide for cable connection locations. Rack-mounted Systems Your Intel® Server Chassis P4000M family can be mounted into a rack. Intel® provides a tool-less
  • Intel P4000M | P4000M family Service Guide - Page 90
    Chassis P4000M family provide two Intel® Remote Management Module 4 knockout. For instructions on installing the Intel® Remote Management Module 4, see Intel® Remote Management Module 4 User Guide. Figure 121. RMM4 knockout Mechanical Locks All configurations of the server chassis can support
  • Intel P4000M | P4000M family Service Guide - Page 91
    Supply Specification The power supply specifications for your Intel® Server Chassis P4000M family depend upon the configuration of chassis you purchased. Below power supply configurations are dynamic voltage regulation requirements for all conditions. 78 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 92
    System Environmental Requirements Table 7. Environmental Requirements Parameter Operating temperature Limits +10°C to +35°C with the maximum rate of change not to exceed 10°C per hour. Intel® Server Chassis P4000M Service Guide 79
  • Intel P4000M | P4000M family Service Guide - Page 93
    3V + 5V -5 V +12 V -12 V Baseboard, Front Panel Board and Fans Processor(s) Memory 3.5-inch Diskette Drive CD-ROM Drive Second 5.25-inch Device Third 5.25-inch Device 1st Hard Drive 2nd Hard Drive 3rd Hard Drive 4th Hard Drive 5V Standby 80 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 94
    A = W) (+3.3 V) X (______ A) Total watts for each voltage level ________ W (+5 V) X (______ A) ________ W (+12 V) X (______ A) ________W (-12 V) X (______ A) ________ W (5 V standby) X (______ A) ________ W Total Combined Wattage ________ W Intel® Server Chassis P4000M Service Guide 81
  • Intel P4000M | P4000M family Service Guide - Page 95
    Appendix A: Regulatory and Compliance Information Please refer to the Server Products Regulatory and Safety document for the product regulatory compliance reference. The document can be downloaded from http://www.intel.com/support/motherboards/server/. 82 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 96
    Appendix B: Safety Information Appendix B: Safety Information Please refer to the Server Products Regulatory and Safety document for the Safety Information. The document can be downloaded from http://www.intel.com/support/motherboards/server/. Intel® Server Chassis P4000M Service Guide 83
  • Intel P4000M | P4000M family Service Guide - Page 97
    C: Installation/Assembly Safety Instructions Please refer to the Server Products Regulatory and Safety document for the Installation/Assembly Safety Instructions. The document can be downloaded from http://www.intel.com/support/motherboards/server/. 84 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 98
    and Intel® Server Management. NOTE You must login in to the reseller site to obtain the 24x7 number. Warranty Information To obtain warranty information, visit the following Intel web site: http://www.intel.com/support/motherboards/server/sb/cs-010807.htm Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 99
    Customer Contact Information: Customer Support Case#: Intel® Server Board or System: (Example: S2600CP, P4308XXMFEN) Server Chassis: (Example PXXXX. If third-party chassis used, indicate make and ? (Yes/No): Has the latest HSC been tried? (Yes/No): 86 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 100
    Expansion Cards, PCIExpress* Adapters, RAID Controllers, SCSI Controllers, and so on): Type Slot Manufacturer Model Firmware Other third part hardware (Example: Example: KVM, Chassis, and so on): Description/Use Manufacturer Model Firmware Intel® Server Chassis P4000M Service Guide 87
  • Intel P4000M | P4000M family Service Guide - Page 101
    been tried? (Yes/No): RAID driver version: Has the latest RAID driver been tried? (Yes/No): RAID volumes configuration (disks & RAID level): RAID volume use (Boot device/Data Volume): Is BBU (Battery Backup Unit) installed? (Yes/No): BBU part number: 88 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 102
    Detailed description of issue: Appendix E: Intel® Server Issue Report Form Troubleshooting tried: Steps to replicate the issue: Intel® Server Chassis P4000M Service Guide 89
  • Intel P4000M | P4000M family Service Guide - Page 103
    Appendix E: Intel® Server Issue Report Form Issue impact statements: Do you have any potential Intel system, or component purchases that this issue is holding up? If yes, below. *All other brands and names are property of their respective owners. 90 Intel® Server Chassis P4000M Service Guide
  • Intel P4000M | P4000M family Service Guide - Page 104
    damages due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper the exclusion of implied warranties, so this limitation may not apply. Intel® Server Chassis P4000M Service Guide 91
  • Intel P4000M | P4000M family Service Guide - Page 105
    www.intel.com), call your local distributor or an Intel Customer Support representative. See Appendix D: Getting Help for telephone numbers. Returning a Defective Product Before returning any product, call your authorized dealer/distribution authority. 92 Intel® Server Chassis P4000M Service Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
Intel
®
Server Chassis P4000M Family
Service Guide
A Guide for Technically Qualified Assemblers of Intel
®
identified
Subassemblies/Products
Order Number: G30559-003