Intel R2000GL Service Guide - Page 29
For system with 8 x 3.5 hard drive bay
View all Intel R2000GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Hardware Installations and Upgrades For system with 8 x 3.5" hard drive bay: Note: To activate the port SCU1 (4-7) on the server board, a proper Intel® RAID C600 Upgrade Key must be installed. For instructions, see Intel® RAID C600 Upgrade Key Installation Guide. Note: A second SSD is supported when the optical drive is NOT in use. For cable routing, please refer to Figure 23. Figure 22. Cable Routing - 8 x 3.5" HDD Intel® Server System R2000GZ/GL Service Guide 17
Hardware Installations and Upgrades
Intel
®
Server System R2000GZ/GL Service Guide
17
For system with 8 x 3.5” hard drive bay:
Note:
To activate the port SCU1 (4-7) on the server board, a proper Intel
®
RAID C600 Upgrade
Key must be installed. For instructions, see Intel
®
RAID C600 Upgrade Key Installation Guide.
Note:
A second SSD is supported when the optical drive is NOT in use. For cable routing, please
refer to
Figure 23
.
Figure 22. Cable Routing – 8 x 3.5” HDD