Intel R2000LH2 R2000LH2/LT2 Service Guide - Page 14
Server May Result In Failure Of The Rack Rails Holding The Server. Use Of A, Caution
View all Intel R2000LH2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Server System Features Feature Internal I/O connectors/headers Optional I/O Module Support System Fans Riser Cards Video On-board storage controllers and options Security Server Management Power Supply Options Storage Bay Options Rack Mount Kit Options Description USB 2.0 connectors - 4 on back panel + 2 on front panel One Type-A USB 2.0 connector One internal USB header One DH-10 Serial-B port connector The following I/O modules utilize a single proprietary on-board connector. An installed I/O module can be supported in addition to standard on-board features and any add-in expansion cards. Quad port 1 GbE based on Intel® Ethernet Controller I350 Dual port 10GBase-T Ethernet module based on Intel® Ethernet Controller I350 - AXX10GBTWLIOM Dual SFP+ port 10GbE module based on Intel® 82500 10 GbE controller - AXX10GBNIAIOM Single Port FDR speed InfiniBand* module with QSFP connector - AXX1FDRIBIOM Eleven managed system fans One power supply fan for each installed power supply module Support for two riser card slots. Each riser card slot has support for three PCIe x16 slots Integrated 2D Video Controller 16 MB DDR3 Memory One low-profile eUSB 2x5 pin connector to support low-profile eUSB solid state devices Two single port SATA connectors capable of supporting up to 6 GB/sec Two 4-port mini-SAS connectors capable of supporting up to 3 GB/sec SAS/SATA Intel® RAID C600 Upgrade Key support providing optional expanded SATA/SAS RAID capabilities Trusted Platform Module (Optional) Integrated Baseboard Management Controller, IPMI 2.0 compliant Support for Intel® Server Management Software (version TBD) Intel® Remote Management Module 4 support (optional) Intel® Remote Management Module 4 Lite support (optional) The system is shipped with two power supplies with support below options. 1600W (1+1) Redundant Hot-swap Capable 1600W (1+0 or 2+0) Non-Redundant 4" x 3.5" SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support 8" x 2.5" SATA/SAS Hot Swap Hard Drive Bays Extended Value rack mount rail kit (AXXELVRAIL) Premium rack mount rail kit (AXXPRAIL), will be available at post launch CAUTION: THE MAXIMUM RECOMMENDED SERVER WEIGHT FOR THE RACK RAILS CAN BE FOUND at http://www.intel.com/support/motherboards/server/sb/CS-033655.htm. EXCEEDING THE MAXIMUM RECOMMENDED WEIGHT OR MISALIGNMENT OF THE SERVER MAY RESULT IN FAILURE OF THE RACK RAILS HOLDING THE SERVER. Use of a mechanical assist to install and align server into the rack rails is recommended. 2 Intel® Server System R2000LH2/LT2 Service Guide