Intel RT3WB080 Hardware User Guide - Page 17

Intel® RAID Controller RT3WB080 Hardware Installation, Requirements, Installing the RAID Controller - driver

Get Intel RT3WB080 PDF manuals and user guides View all Intel RT3WB080 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

2 Intel® RAID Controller RT3WB080 Hardware Installation Requirements • An Intel® RAID Controller RT3WB080 with the provided cables • A host system with an available x8 or x16 PCI-Express* slot • The Resource CD, which contains drivers and documentation • SATA III or SATA II 3.0 hard drives In addition, Intel Corporation strongly recommends using an uninterruptible power supply (UPS). Installing the RAID Controller To install the RAID Controller, follow these steps: 1. Turn off the power to the system, all drives, enclosures, and system components. Remove the power cord(s). 2. Remove the server system cover. For instructions, see the server system documentation. 3. If necessary, change the bracket on the RAID controller to fit the height of the server system (see Figure 1). Intel® RAID Controller RT3WB080 Hardware User's Guide 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Intel® RAID Controller RT3WB080 Hardware User’s Guide
7
2
Intel
®
RAID Controller RT3WB080
Hardware Installation
Requirements
•
An Intel
®
RAID Controller RT3WB080 with the provided cables
•
A host system with an available x8 or x16 PCI-Express* slot
•
The Resource CD, which contains drivers and documentation
•
SATA III or SATA II 3.0 hard drives
In addition, Intel Corporation strongly recommends using an uninterruptible power supply
(UPS).
Installing the RAID Controller
To install the RAID Controller, follow these steps:
1.
Turn off the power to the system, all drives, enclosures, and system components.
Remove the power cord(s).
2.
Remove the server system cover. For instructions, see the server system
documentation.
3.
If necessary, change the bracket on the RAID controller to fit the height of the
server system (see
Figure 1
).