Intel S1400FP Intel Server Board S1400FP Technical Product Specification - Page 46
KVM/Serial Over LAN (SOL) Function
View all Intel S1400FP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Functional Architecture Intel® Server Board S1400FP TPS 3.3.22 KVM/Serial Over LAN (SOL) Function These functions support redirection of keyboard, mouse, and text screen to a terminal window on a remote console. The keyboard, mouse, and text redirection enables the control of the client machine through the network without the need to be physically near that machine. Text, mouse, and keyboard redirection allows the remote machine to control and configure the client by entering BIOS setup. The KVM/SOL function emulates a standard PCI serial port and redirects the data from the serial port to the management console using LAN. KVM has additional requirements of internal graphics and SOL may be used when KVM is not supported. 3.3.23 On-board Serial Attached SCSI (SAS)/Serial ATA (SATA) Support and Options The Intel® C602 (-A) chipset provides storage support via two integrated controllers: AHCI and SCU. By default the server board will support two single 6Gb/sec SATA ports routed from the AHCI controller to the two white SATA connectors labeled "SATA_0" and "SATA_1", four 3Gb/sec SATA ports routed from the AHCI controller to the four black SATA connectors labeled "SATA_2" to "SATA_5", and four 3Gb/sec SATA ports routed from the SCU to the four SATA/SAS connectors labeled "SATA/SAS_0" to "SATA/SAS_3". Note: The SATA/SAS connector labeled "SATA/SAS_4" to "SATA/SAS_7" is NOT functional by default and is only enabled with the addition of an Intel® RAID C600 Upgrade Key option supporting eight SAS/SATA ports. Standard are two embedded software RAID options using the storage ports configured from the SCU only: Intel® Embedded Server RAID Technology 2 (ESRT2) based on LSI* MegaRAID SW RAID technology supporting SATA RAID levels 0,1,10 Intel® Rapid Storage Technology (RSTe) supporting SATA RAID levels 0,1,5,10 The server board is capable of supporting additional chipset embedded SAS and RAID options from the SCU controller when configured with one of several available Intel® RAID C600 Upgrade Keys. Upgrade keys install onto a 4-pin connector on the server board labeled "STOR_UPG_KEY". The following table identifies available upgrade key options and their supported features. Table 7. Intel® RAID C600 Upgrade Key Options Product Code Color On-Server Board SATA/SAS Capable Controller On-Server Board AHCI Capable SATA Controller No Key N/A Intel® RSTE 4 ports SATA R0,1,10,5 Intel® RSTE SATA R0,1,10,5 or Intel® ESRT2 4 ports SATA R0,1,10 or Intel® ESRT2 SATA R0,1,10 RKSATA4R5 Black Intel® RSTE 4 ports SATA R0,1,10,5 or Intel® ESRT2 4 ports SATA R0,1,10,5 Intel® RSTE SATA R0,1,10,5 or Intel® ESRT2 SATA R0,1,10,5 RKSATA8 Blue Intel® RSTE 8 ports SATA R0,1,10,5 or Intel® ESRT2 8 ports SATA R0,1,10 Intel® RSTE SATA R0,1,10,5 or Intel® ESRT2 SATA R0,1,10 RKSATA8R5 White Intel® RSTE 8 ports SATA R0,1,10,5 or Intel® ESRT2 8 ports SATA R0,1,10,5 Intel® RSTE SATA R0,1,10,5 or Intel® ESRT2 SATA R0,1,10,5 34 Revision 1.0 Intel order number G64246-001