Intel S2600IP Software User Guide for Windows* - Page 22
Exporting SATA Drives on AHCI Controller
View all Intel S2600IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
RAID Features 2.5.39 Power Management The Intel® RSTe product will support all the necessary power management functions required by the OSs. 2.5.40 Staggered Spin-up Intel® RSTe will provide support for staggered spin-up on the SCU controller for those hard drives that support this feature. 2.5.41 Exporting SATA Drives on AHCI Controller Intel® RSTe RAID Legacy Option ROMs will export those drives directly attached on a port order basis. This will be for both the AHCI controller. 2.5.42 ATAPI Intel® RSTe will provide support for ATAPI devices. Intel® RSTe RAID Legacy Option ROM will only support HDD devices (not ATAPI). 2.5.43 Solid State Drives (SSD) Intel® RSTe will support SSDs as if they are Hard Disk Drives. 2.5.44 AHCI Controller Intel® RSTe will support TRIM on the AHCI controller in a non-RAID configurations. 2.5.45 SCU Controller Intel® RSTe will support TRIM on the SCU controller in a non-RAID configurations. 2.6 Email Alerting and Notification Note: This feature has a platform specific limitation. It is supported only on Intel® C600 series chipset based platforms; not supported on legacy platforms/chipsets. Intel® RSTe will support email notification of certain storage events (see Appendix A for supported events). The Intel® RSTe UI will provide the interface for enabling/disabling and configuring the email notification feature. The default setting in the UI is 'disabled'. The email notification feature allows the user to configure the platform to send alert/notification emails for each storage subsystem event that gets reported by the Intel® RSTe monitor service. 2.6.1 Configuration The Intel® RSTe user application will provide the interface to allow the user to configure the email alert notification feature from the Preferences tab of the UI (user must be logged on with administrative privileges). User can enable/disable the email notification feature User can configure the level of storage system events to be sent by email notification (Storage system Information, Warning, and/or Error). Any combination of the three alert levels can be configured to trigger an email notification User can configure the email settings: SMTP host (required) - Port (required) - Return email address (required) - Recipient email Intel® RSTe User's Guide 13