Intel S2600IP Software User Guide for Windows* - Page 24
RAID OpROM Utility
View all Intel S2600IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3 RAID OpROM Utility RAID OpROM Utility This section provides an introduction to the Intel® RSTe OpROM Utility. 3.1 Enter Intel® RSTe OpROM Utility 1. To use Intel® RSTe, firstly ensure that the Intel® Server Board has RSTe enabled in its BIOS SETUP. To enable it, press during server board POST, so as to enter BIOS SETUP. Go to Advanced - Mass Storage Controller Configuration - SATA/SAS Capable Controller, and choose INTEL® RSTe. Figure 1. Enable RSTe in BIOS Setup Note: For Intel® Server Boards, it's recommended to disable Quiet Boot in Main Tab in BIOS SETUP, so as to automatically show Intel® RSTe scanning process during POST. If Quiet Boot is enabled, remember to press ESC at the beginning of each reboot to show Intel® RSTe scanning process during POST. 2. During the POST, When seeing below screen indicating "Press to enter Configuration Utility", press to enter the Intel® RSTe Configuration Utility. Intel® RSTe User's Guide 15