Intel S3210SHLC User Guide - Page 59
Opening PCI Add-in Card Retention Device DP/WS/BRP configuration, shown,
UPC - 735858197489
View all Intel S3210SHLC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Hardware Installations and Upgrades 4. Open the back panel PCI Add-in Card Retention Device by pressing open from the inside of the chassis. TP02049 Figure 46. Opening PCI Add-in Card Retention Device (DP/WS/BRP configuration shown) 5. Disconnect any cables that may be attached to the PCI add-in board that needs to be removed. 6. Firmly grab the PCI add-in board by its top edge or upper corners and remove from the expansion slot on the server board (see letter "A" in the following figure). Place the removed add-in board in an anti-static protective wrapper. Close the back panel PCI Add-in Card Retention Device (see letter "B"). BB A TP01724 Figure 47. Removing PCI Add-in Board Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 41
Hardware Installations and Upgrades
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
41
4.
Open the back panel PCI Add-in Card Retention Device by pressing open from the
inside of the chassis.
Figure 46.
Opening PCI Add-in Card Retention Device (DP/WS/BRP configuration
shown)
5.
Disconnect any cables that may be attached to the PCI add-in board that needs to be
removed.
6.
Firmly grab the PCI add-in board by its top edge or upper corners and remove from
the expansion slot on the server board (see letter “A” in the following figure). Place
the removed add-in board in an anti-static protective wrapper. Close the back panel
PCI Add-in Card Retention Device (see letter “B”).
Figure 47.
Removing PCI Add-in Board
TP02049
TP01724
B
A
B