Intel S5000XVN User Guide

Intel S5000XVN - Workstation Board Motherboard Manual

Get Intel S5000XVN - Workstation Board Motherboard PDF manuals and user guides
UPC - 735858196086
View all Intel S5000XVN manuals
Add to My Manuals
Save this manual to your list of manuals

Intel S5000XVN manual content summary:

  • Intel S5000XVN | User Guide - Page 1
    Intel® Workstation Board S5000XVN User Guide A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/ Products Intel Order Number D36222-004
  • Intel S5000XVN | User Guide - Page 2
    or death may occur. Intel may make changes to specifications and product descriptions at any time, without notice. Intel workstation boards contain a number of high-density VLSI and power delivery components that need adequate airflow for cooling. Intel's own chassis are designed and tested to
  • Intel S5000XVN | User Guide - Page 3
    in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Intel® Server Deployment Toolkit 2.0 CD and/or at http://support.intel.com/support/ motherboards/server/sb/cs-010770.htm. Wichtige Sicherheitshinweise Lesen Sie
  • Intel S5000XVN | User Guide - Page 4
    http://support.intel.com/support/motherboards/server/sb/CS-010770.htm 上的 Intel Server Boards and Server Chassis Safety Information（《Intel iv Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 5
    can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. Intel® Workstation Board S5000XVN v
  • Intel S5000XVN | User Guide - Page 6
    vi Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 7
    purchasing and using the Intel® Workstation Board S5000XVN. Multiple versions of the Intel® Workstation Board S5000XVN are available. This manual applies to workstation boards with the following product codes: • S5000XVNSATA • S5000XVNSATAR • S5000XVNSAS • S5000XVNSASR Where a feature varies from
  • Intel S5000XVN | User Guide - Page 8
    drive, RAID controller, operating system. For information about which accessories, memory, processors, and third-party hardware have been tested and can be used with your board, and for ordering information for Intel products, see http://support.intel.com/support/motherboards/server/S5000XVN/ compat
  • Intel S5000XVN | User Guide - Page 9
    FBDIMMs that have been tested with this product To make sure your system falls within the allowed power budget Software to manage your Intel® workstation Drivers Firmware and BIOS updates, or BIOS recovery files Diagnostics test software Spares and Configuration Guide. See the section on the web
  • Intel S5000XVN | User Guide - Page 10
    x Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 11
    4 Configuration Jumpers ...6 Intel® Light-Guided Diagnostics 8 Back Panel Features ...11 RAID Support ...12 SATA Workstation Board 12 SAS Workstation Board 13 Audio Support ...14 Hardware Requirements ...15 Processor ...15 Memory ...15 Power Supply ...17 Optional Hardware ...18 Intel® RAID
  • Intel S5000XVN | User Guide - Page 12
    45 Specific Problems and Corrective Actions 46 Power Light Does Not Light 46 No Characters Appear on Screen 47 Characters Are Distorted or Incorrect 48 System Cooling Fans Do Not Rotate Properly 48 CD-ROM Drive or DVD-ROM Drive Activity Light Does Not Light 48 Cannot Connect to a Server 49
  • Intel S5000XVN | User Guide - Page 13
    (Canada) ...58 Europe (CE Declaration of Conformity 58 VCCI (Japan) ...58 BSMI (Taiwan) ...59 RRL (Korea) ...59 CNCA (CCC-China) ...59 Product Ecology Change (EU RoHS 60 Product Ecology Change (CRoHS 60 China Packaging Recycle Marks (or GB18455-2001 62 CA Perchlorate Warning ...62 End-of-Life
  • Intel S5000XVN | User Guide - Page 14
    xiv
  • Intel S5000XVN | User Guide - Page 15
    List of Figures Figure 1. Intel® Workstation Board S5000XVN 1 Figure 2. Connector and Component Locations 4 Figure 3. Configuration Jumpers 7 Figure 4. Back Panel Connectors and LEDs 11 Figure 5. DIMM Sockets...16 Figure 6. BIOS Bank Select Jumper in Force Lower Bank Position 23 Figure 7.
  • Intel S5000XVN | User Guide - Page 16
    xvi
  • Intel S5000XVN | User Guide - Page 17
    Table 2. Workstation Board Features 2 Table 3. NIC LEDs ...11 Table 4. Setup Menu Key Use 20 Table 5. Heatsink Requirements for Compatible Intel® Server Chassis 34 Table 6. Resetting the System 43 Table 7. POST Error Beep Codes 52 Table 8. Error Beep Codes Generated by Intel® Remote Management
  • Intel S5000XVN | User Guide - Page 18
    xviii
  • Intel S5000XVN | User Guide - Page 19
    the main features of the Intel® Workstation Board S5000XVN. This chapter provides a photograph of the product, a list of the workstation board features, and diagrams showing the location of important components and connections on the workstation board. Figure 1. Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 20
    . Product code S5000XVNSATAR and S5000XVNSASR only • Eight FBDIMM sockets (DDR2-533 and DDR2-667) supporting 32 GB maximum memory • Quad-channel memory architecture • Intel® 6321ESB I/O Controller Hub • Intel® 5000X Memory Controller Hub Support for • Two processor fans (4-pin headers) • Four front
  • Intel S5000XVN | User Guide - Page 21
    front control panel header One of the following: • Product code S5000XVNSATA or S5000XVNSATAR: Intel® Embedded Server RAID Technology II provides SATA RAID 0, 1, and 10 with optional RAID 5 support provided by the Intel® RAID Activation Key AXXRAKSW5 • Product code S5000XVNSAS or S5000XVNSASR: Intel
  • Intel S5000XVN | User Guide - Page 22
    Table 2. Workstation Board Features Feature Management support Audio Description • Support for the Intel® Local Control Panel (optional component sold separately) • Support for Intel® System Management software • Intel® Light-Guided Diagnostics on field replaceable units • Integrated audio with
  • Intel S5000XVN | User Guide - Page 23
    : SATA RAID 5 key connector (available only with product code S5000XVNSATA or S5000XVNSATAR) PP. SAS_Key: SAS RAID 5 key connector (available only with product code S5000XVNSAS or S5000XVNSASR) QQ. Serial B / emergency management port header RR. Chassis intrusion header Intel® Workstation Board
  • Intel S5000XVN | User Guide - Page 24
    the jumpers on these pins for the CMOS to be cleared. To use the jumper to clear the CMOS: Power down the workstation, leaving AC power connected. Place the jumper on pins 2 - 3 for 5 to 10 seconds. Move the jumper back to pins 1 - 2. Power on the workstation 6 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 25
    to 10 seconds. Power down the workstation. Move the jumper back to pins 1 - 2. Power on the workstation. Disable force update: These pins should be jumpered for normal operation. Enable force update: Jumpering these pins forces a BMC update. Figure 3. Configuration Jumpers Intel® Workstation Board
  • Intel S5000XVN | User Guide - Page 26
    components and to help you identify the workstation from among several workstations. Except for the ID LED, the status LED, and the +5-volt standby LED, the LEDs turn on (amber) only if a failure occurs. A C B D E F G I J K LMNO P H Q R S T U AF000502 8 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 27
    fan 6 fault LED H. System fan 5 fault LED I. DIMM A1 fault LED J. DIMM A2 fault LED K. DIMM B1 fault LED Function POST LED. The sequence of lit POST LEDs is used to identify specific errors that might occur during the boot process. See the appendix of the Technical Product Specification
  • Intel S5000XVN | User Guide - Page 28
    on the heatsink for processor 2. Replace the faulty unit. This LED applies only to workstation systems that use an active heatsink. This LED indicates a fault has occurred with fan that is installed on the heatsink for processor 1. Replace the faulty unit. 10 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 29
    Blinking green Off Solid green Solid amber Description No network connection is in place Active network connection is in place Transmit / receive activity is occurring 10 Mbps connection (if left LED is on or blinking) 100 Mbps connection 1000 Mbps connection Intel® Workstation Board S5000XVN 11
  • Intel S5000XVN | User Guide - Page 30
    product code S5000XVNSAS or S5000XVNSASR. The SAS models provides both SAS and SATA support; the SATA models provides only SATA support. For information on configuring RAID, see the RAID software user's guide that is included on the Intel® Server Deployment Toolkit 2.0 CD. SATA Workstation Board
  • Intel S5000XVN | User Guide - Page 31
    in the BIOS Setup utility, Intel® Embedded Server RAID Technology II is available. This enables SAS RAID modes 0, 1, or 10 for the four blue ports on the workstation board. This SAS controller can mix SAS and SATA drives and the RAID mode of this SAS controller supports up to eight SAS/SATA physical
  • Intel S5000XVN | User Guide - Page 32
    of 26 sound environments to enhance gaming experience • 10-band software equalizer • Enhanced configuration panel and device sensing wizard to improve user experience • Content copy protection for S/PDIF interface • Mono / stereo microphone noise suppression 14 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 33
    processors (Product codes S5000XVNSATAR and S5000XVNSASR only) • One or two 45 nm 2P Dual-Core Intel®Xeon® processors (Product codes S5000XVNSATAR and S5000XVNSASR only) For a list of supported processors, see the links under "Additional Information and Software". Memory The Intel® Workstation Board
  • Intel S5000XVN | User Guide - Page 34
    Branch 1, Channel A, F. DIMM_A2 Branch 1, Channel B, G. DIMM_B1 Branch 1, Channel B, H. DIMM_B2 Branch 2, Channel C, DIMM_C1 Branch 2, Channel C, DIMM_C2 Branch 2, Channel D, DIMM_D1 Branch 2, Channel D, DIMM_D2 Figure 5. DIMM Sockets 16 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 35
    of supported memory FBDIMMs, see the links under "Additional Information and Software" on page viii Power Supply A minimum of 550 watts is required. Your power supply must provide a minimum of 3 amps of 5-volt standby current or the workstation will not boot. Intel® Workstation Board S5000XVN 17
  • Intel S5000XVN | User Guide - Page 36
    RAID Activation Key are included with the accessory. Hard Disk Drives The Intel® Workstation Board S5000XVN supports different hard disk drive options, depending on the version of the workstation board purchased. • Optical hard disk drives • Serial ATA (SATA) and (SAS): - Product code S5000XVNSATA
  • Intel S5000XVN | User Guide - Page 37
    and Software" for a link to the Technical Product Specification where you will find details about specific BIOS setup screens. Starting Setup You can enter and start BIOS Setup under several conditions: • When you turn on the workstation, after POST completes the memory test. • When you have moved
  • Intel S5000XVN | User Guide - Page 38
    menu, the parent menu is re-entered. When the key is pressed in any submenu, the parent menu is re-entered. When the key is pressed in any major menu, the exit confirmation window is displayed and the user is asked whether changes can be discarded. 20 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 39
    BIOS, the system reverts to the BIOS that was in place before the upgrade was performed. This provides a safeguard against problems that might happen during the upgrade, such as a power outage during the upgrade process. This is called the rolling BIOS feature. Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 40
    update process! Note: You may encounter a CMOS Checksum error or other problem after reboot. If this happens, shut down the system and boot it again. CMOS checksum errors require that you enter Setup, check your settings, save your settings, and exit Setup. 22 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 41
    Figure 6. BIOS Bank Select Jumper in Force Lower Bank Position 5. Close the chassis. 6. Reconnect the AC power and power up the workstation. The BIOS will boot to the previous BIOS until you either move the jumper again or until you perform another BIOS update. Intel® Workstation Board S5000XVN 23
  • Intel S5000XVN | User Guide - Page 42
    Clear Jumper in Clear Password Position 5. Power up the workstation and wait 10 seconds. 6. Power down the workstation. 7. Move the Password Clear jumper back to the original position, covering pins 1 and 2. 8. Close the chassis. 9. Power up the workstation. 24 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 43
    CLR Default 2 Clear 3 CMOS J1D1 AF000505 Figure 8. CMOS Clear Jumper in the Clear CMOS Position 5. Wait 10 seconds. 6. Move the CMOS Clear jumper back to the original position, covering pins 1 and 2. 7. Close the chassis. 8. Power up the workstation. Intel® Workstation Board S5000XVN 25
  • Intel S5000XVN | User Guide - Page 44
    26 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 45
    in "Safety Information" on page iii. 2. Turn off all peripheral devices connected to the workstation. Turn off the workstation. 3. Disconnect the AC power cord from the workstation. 4. Remove the chassis cover. See the documentation that came with your chassis for instructions on removing the cover.
  • Intel S5000XVN | User Guide - Page 46
    chassis for instructions on removing chassis components. D C B A E F G H AF000503 Callout A. B. C. D. DIMM Socket Callout DIMM Socket DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 E. DIMM_C1 F. DIMM_C2 G. DIMM_D1 H. DIMM_D2 Figure 9. Locating DIMM Sockets 28 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 47
    10 is pointing to the key in the socket. 10. chassis for instructions on removing chassis components. 14. Replace the chassis cover and reconnect the AC power cord. See the documentation that came with your chassis for instructions on installing the chassis cover. Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 48
    Replace the chassis cover and reconnect the AC power cord. See the documentation that came with your chassis for instructions on installing the cover. Installing or Replacing the Processor Caution: Processor must be appropriate: You may damage the workstation board if you install a processor that is
  • Intel S5000XVN | User Guide - Page 49
    documentation that came with your chassis for instructions on removing the cover. 5. Locate the processor sockets (see Figure 11). A B AF000506 Callout A. Processor Socket Callout Processor Socket CPU_2 B. CPU_1 Figure 11. Locating Processor Sockets Intel® Workstation Board S5000XVN 31
  • Intel S5000XVN | User Guide - Page 50
    open the lever. See Figure 12. AF000095 Figure 12. Opening Processor Socket Lever 8. Push down on the rear tab of the load plate to swing the front of the load plate up slightly. Fully open the load plate. See Figure 13. Figure 13. Opening Load Plate AF000096 32 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 51
    the socket lever. Push downward on the socket lever while pushing it toward the center of the to engage it under the hook on the processor socket. 14. Install the heatsink(s). See "Installing the Heatsink(s)" on page 34 for instructions. Intel® Workstation Board S5000XVN 33
  • Intel S5000XVN | User Guide - Page 52
    TIM. Each processor requires a heatsink. Depending on your chassis, you may need to use either a passive or an active heatsink. An active heatsink has a fan attached to the top of it and a cable that needs to be connected to the workstation board. The following table shows the Intel® server chassis
  • Intel S5000XVN | User Guide - Page 53
    processor. See "Installing the Processor" on page 31 for instructions. 2. Set the heatsink over the processor, lining up the four captive screws with the four posts surrounding the processor sis AF000098 Figure 16. Installing Heatsink (passive heatsink shown) Intel® Workstation Board S5000XVN 35
  • Intel S5000XVN | User Guide - Page 54
    . See the documentation that came with your chassis for instructions on installing chassis components. 7. Replace the chassis cover and reconnect the AC power cord. See the documentation that came with your chassis for instructions on installing the cover. 36 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 55
    and remove any components necessary to access the processor sockets. See the documentation that came with your chassis for instructions on removing chassis components. 6. Active heatsink only: Unplug the processor fan cable from the workstation board. 7. Loosen the four captive screws on the corners
  • Intel S5000XVN | User Guide - Page 56
    the lever. See Figure 18. AF000095 Figure 18. Opening Processor Socket Lever 11. Push down on the rear tab of the load plate to swing the front of the load plate up slightly. Fully open the load plate. See Figure 19. Figure 19. Opening Load Plate AF000415 38 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 57
    Processor from Socket 13. Store the processor in the packaging materials in which it came. 14. Install the protective cover over the load plate if a replacement processor will not be installed. AF000417 Figure 21. Installing Protective Cover onto Load Plate Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 58
    that came with your chassis for instructions on installing chassis components. 19. Replace the chassis cover. See the documentation that came with your chassis for instructions on installing the cover. Replacing the CMOS Battery The lithium CMOS battery on the workstation board powers the RTC in the
  • Intel S5000XVN | User Guide - Page 59
    components. 11. Replace the chassis cover and reconnect the AC power cord. See the documentation that came with your chassis for instructions on installing the cover. 12. Run the BIOS Setup utility to restore the configuration settings to the real-time clock. Intel® Workstation Board S5000XVN 41
  • Intel S5000XVN | User Guide - Page 60
    42 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 61
    Troubleshooting This chapter helps you identify and solve problems that might occur while you are using the system. For any issue, first ensure you are using the latest software.These software updates include updates for BIOS, the baseboard management controller (BMC), and the hot-swap controller
  • Intel S5000XVN | User Guide - Page 62
    all integrated components from the tested components lists? Check the tested memory, and chassis lists, as well as the supported hardware and operating system list. See "Additional Information and Software" on page viii for links to the tested component lists. 44 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 63
    . Confirming Loading of the Operating System Once the system boots up, the operating system prompt appears on the screen. The prompt varies according to the operating system. If the operating system prompt does not appear, see "No Characters Appear on Screen". Intel® Workstation Board S5000XVN 45
  • Intel S5000XVN | User Guide - Page 64
    might be defective or the cable from the control panel to the workstation board might be loose. • Have you securely plugged the workstation AC power cord into the power supply? • Some power supplies have a power switch on the back of the power supply, next to the fan. If your system has one, is it
  • Intel S5000XVN | User Guide - Page 65
    . This information is useful for your service representative. 5. If you do not receive a beep code and characters do not appear, the video display monitor or video controller may have failed. Contact your service representative or authorized dealer for help. Intel® Workstation Board S5000XVN 47
  • Intel S5000XVN | User Guide - Page 66
    • Have your fans speeded up in response to a fan that has failed? • Are the fan power connectors properly connected to the workstation board? • Is the cable from the control panel board connected to the both the control panel board and to the workstation board? • Are the power supply cables properly
  • Intel S5000XVN | User Guide - Page 67
    sure your BIOS is current. See "Additional Information and Software" for a link to the current version. • Make sure the other adapter supports shared interrupts. Make sure your operating system supports shared interrupts. • Try reseating the add-in adapter. Intel® Workstation Board S5000XVN 49
  • Intel S5000XVN | User Guide - Page 68
    not work. • If you are running the software from a USB floppy disk, CD-ROM or DVD-ROM, try a different disk. • Make sure the correct device drivers installed. If the problems persist, contact the software vendor's customer service representative. 50 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 69
    drive is compatible. See "Additional Information and Software" for a link to the tested drives. • Make sure you have not exceeded the power budget for the workstation. See "Additional Information and Software" for a link to software to check your power budget. Intel® Workstation Board S5000XVN 51
  • Intel S5000XVN | User Guide - Page 70
    sure the BIOS is configured to allow the CD-ROM to be the first bootable device. LED Information The Intel® Workstation Board S5000XVN includes LEDs that can aid in troubleshooting your system. For the location of the LEDs, see "Intel® Light-Guided Diagnostics" on page 8. BIOS POST Beep Codes The
  • Intel S5000XVN | User Guide - Page 71
    error or CPU 1 socket is empty. Reseat or replace the failed processor. In a two-processor system, make sure the processors are identical. Front-side bus select configuration error. DC power unexpectedly lost. Chipset control failure. Power control failure. Intel® Workstation Board S5000XVN 53
  • Intel S5000XVN | User Guide - Page 72
    54 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 73
    Class A Compliance The Intel® Workstation Board S5000XVN has been has been tested and verified to comply with the following electromagnetic compatibility (EMC) regulations when installed a compatible Intel® host system. For information on compatible host system(s) see Intel's Server Builder Web site
  • Intel S5000XVN | User Guide - Page 74
    ICES-003 CLASS A CANADA NMB-003 CLASSE A Ctick Marking RLL MIC Mark Australia / New Zealand Korea See the regulatory information document for additional information. 56 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 75
    if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more . Intel® Workstation Board S5000XVN 57
  • Intel S5000XVN | User Guide - Page 76
    Control Council for Interference (VCCI) from Information Technology Equipment. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. 58 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 77
    Date of Manufacturer: Refer to date code on product 5. Manufacturer/Nation: Intel Corporation/Refer to country of origin marked on product CNCA (CCC-China) The CCC Certification Marking and EMC warning is located on the outside rear area of the product. A Intel® Workstation Board S5000XVN 59
  • Intel S5000XVN | User Guide - Page 78
    with EFUP marking • For "Business to Business" products, Intel intends to place EFUP marking on product for customer convenience • EFUP for Intel server products has been determined as 20 years. Below is an example of EFUP mark applied to Intel server products. 60 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 79
    products to be provided with controlled substance information. Intel understands the end-seller (entity placing product into market place) is responsible for providing the controlled substance information. Controlled QRWEHDSDUWRIWKHHQFORVHG SURGXFW  Intel® Workstation Board S5000XVN 61
  • Intel S5000XVN | User Guide - Page 80
    Perchlorate material. End-of-Life / Product Recycling Product recycling and end-of-life take-back systems and requirements vary by country. Contact the retailer or distributor of this product for information about product recycling and / or take-back. 62 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 81
    the following pages. However, for the fastest service, please submit your form via the Internet. For an updated support contact list, see http://www.intel.com/support/9089.htm/ U.S. and Canada See http://support.intel.com/support/motherboards/server/S5000XVN. Europe Belgium ..... 02 714 3182 Denmark
  • Intel S5000XVN | User Guide - Page 82
    free 8 621 33104691 (not toll-free) Hong Kong 852 2 844 4456 India........... 0006517 2 68303634 (manual toll-free. You need an IDD-equipped telephone) Indonesia ... 803 65 7249 Korea ......... 822 767 2595 USA at 800 225 288. Once connected, dial 800 843 4481 64 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 83
    0114 Peru 001 916 377 0114 Uruguay..... 001 916 377 0114 Venezuela... Contact AT&T USA at 0 800 2255 288. Once connected, dial 800 843 4481 Intel® Workstation Board S5000XVN 65
  • Intel S5000XVN | User Guide - Page 84
    66 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 85
    at http:// support.intel.com/support/motherboards/server/S5000XVN/. For the fastest service, please submit your form via the Internet. Date Submitted Company Name Contact Name Email Address Intel Workstation Product Priority (Critical, Hot, High, Low Brief Problem Description. Provide
  • Intel S5000XVN | User Guide - Page 86
    Configuration / part number Operating System Information Operating System Version Service Pack / Update Add-in Card, Peripheral, Video, NIC Check each video NIC On-board NIC1 On-board NIC2 Description Driver Revision IRQ I/O Base FW Address Revision 68 Intel® Workstation Board S5000XVN
  • Intel S5000XVN | User Guide - Page 87
    Hard Drive Information Drive Type (SATA, SAS, etc.) Make/Model Hot-swap or Fixed IRQ FW Revision Control Panel Information Standard Control Panel Intel® Local Control Panel Intel® Workstation Board S5000XVN 69
  • Intel S5000XVN | User Guide - Page 88
    Complete Problem Description In the space below, provide a complete description of the steps used to reproduce the problem or a complete description of where the problem can be found. Please also include any details on troubleshooting already done 70 Intel® Workstation Board S5000XVN
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Intel
®
Workstation Board
S5000XVN
User Guide
A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/
Products
Intel Order Number D36222-004