Intel SASMF8I User Guide - Page 16

Installing the RAID Controller To install the RAID Controller, follow these steps: 1. Power off the computer, all drives, enclosures, and system components. Remove the power cord from the computer. 2. Remove the chassis cover and access the PCI Express add-in card slots. For instructions, see your server chassis documentation. 3. Align the controller's connector with a x4 PCI Express* slot on the server board. 4. Press down gently but firmly to ensure that the card is properly seated in the slot, as shown in Figure 1. Secure the bracket to the computer chassis. Bracket Screw PHreerses PHreerses Edge of Main Board PCI Express* Slot 32-bit (3.3V) Slots (3.3V) 64-bit Slot (3.3V) AF002653 Figure 1. Inserting the Intel® RAID Controller SASMF8I into a PCI Express* Slot 6 Intel® RAID Controller SASMF8I Hardware User's Guide