Intel SASMF8I User Guide - Page 22

Table 1. Jumper Descriptions Jumper Description Type J7 Internal SAS/SATA SFF8087 port connector, ports 0-3 J9 Keyed I2C connector 3-pin connector Comments Connection to SAS/SATA devices. Out-of-band enclosure management (SES2) Technical Specifications The design and implementation of the Intel® RAID Controller SASMF8I minimizes electromagnetic emissions, susceptibility to radio frequency energy, and the effects of electrostatic discharge. See the appendices for regulatory marks and certifications. Table 2 lists the specifications for the Intel® RAID Controller SASMF8I. Table 2. Specifications Specification Operating Voltage Card Size Array Interface to Host SAS Bus Speed SAS Controller SAS / SATA Ports Firmware Compatible Devices Cabling Redundant Configuration Enclosure Management Intel® RAID Controller SASMF8I +3.3 V, +12 V Low-profile MD2 PCI Express* adapter card size (6.600 inches by 2.713 inches) PCI Express* Rev 1.0A, x4 lane width 2.5 Gbps 3 GBps per port, point-to-point One LSI SAS 1068 controller 2x4 internal ports. Supports 8 SAS/SATA devices using expanders, and 40 virtual disks. 2 MB in reflashable flash ROM • Mixed capacity, mixed SATA II and SAS in different enclosures • Non-disk devices, including expanders. • Small, thin cables that do not restrict airflow • Shared connectors for multiple drive types. Config on disk (COD) stores RAID configuration. I2C out-of-band, SES2 in-band, SAF-TE (LEDs) 12 Intel® RAID Controller SASMF8I Hardware User's Guide