Intel SC5100 Installation Guide - Page 9

Rack Installation Procedures This manual describes the procedure to convert an Intel® SC5100 or SC5200 server chassis from the pedestal configuration to the rack configuration. In the following procedures, chassis directions (top, bottom, left, right) refer to a chassis in rack orientation when you are facing the front of the chassis. Observe the safety and ESD precautions at the beginning of this manual. Kit Contents • Two unpainted access covers (SC5100 and SC5200 Base use the access cover without a fan access door; SC5200 HSRP uses the access cover with a fan access door) • One unpainted left side cover with rack mounting holes and one right side cover with rack mounting holes • One unpainted bottom cover • Rack bezel assembly • Bag of mounting hardware • This manual • Rail kit • Rack handles • 5 ¼ bay reorientation bracket ✏ NOTE Your chassis is designed to be compatible with the EIA-310-d rack standard. Be sure to select a rack cabinet enclosure that is EIA-310-d compliant. For additional compatibility and rack cabinet selection information, see http://support.intel.com/support/motherboards/server/chassis/sc5100 or http://support.intel.com/support/motherboards/server/chassis/sc5200 9