Intel SE7501WV2 Product Guide

Intel SE7501WV2 - Server Chassis - SR2300 Manual

Get Intel SE7501WV2 - Server Chassis - SR2300 PDF manuals and user guides
UPC - 735858159388
View all Intel SE7501WV2 manuals
Add to My Manuals
Save this manual to your list of manuals

Intel SE7501WV2 manual content summary:

  • Intel SE7501WV2 | Product Guide - Page 1
    Intel® Server Chassis SR2300 Subassembly Product Guide A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/Products Order Number: A86100-003
  • Intel SE7501WV2 | Product Guide - Page 2
    Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Resource CD and/or at http:\\support.intel.com. Disclaimer Information in this document is provided in connection with
  • Intel SE7501WV2 | Product Guide - Page 3
    SCSI Hard Drives 13 Flex Bay ...14 500 Watt Redundant Power Supply 14 480 Watt Power Supply...14 System Cooling ...14 Chassis Security ...15 Locking and Unlocking the Front Bezel 15 2 Assembling the System 17 Before You Begin ...17 Supplies Needed ...17 Installation/Assembly Safety Instructions
  • Intel SE7501WV2 | Product Guide - Page 4
    a DVD/CD-ROM drive/FDD Module 49 Replacing a PCI Add-in Card 50 Replacing a 500 Watt Power Supply Module 53 Replacing a Power Supply Cage 54 Installing a Redundant Fan 56 Replacing the Fan Module 58 Replacing a Backplane Board 59 Replacing a Front Panel Board 60 Replacing a Server Board
  • Intel SE7501WV2 | Product Guide - Page 5
    a Power Supply Cage 54 Figure 37. Removing the Fan module 56 Figure 38. Removing the Fan Blank 56 Figure 39. Installing the New Fan 57 Figure 40. Removing the Fan module 58 Figure 41. Replacing a Backplane Board 59 Figure 42. Removing the Front Panel Board 60 Figure 43. Removing the Server
  • Intel SE7501WV2 | Product Guide - Page 6
    Tables Table 1. Table 2. Table 3. Table 4. Control Button Functions 12 LED Indicator Status 12 Power Usage Worksheet 1 71 Power Usage Worksheet 2 72 vi Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 7
    Chassis SR2300 kit is designed to support the Intel® Server Board SE7500WV2 or SE7501WV2. The fan module and riser cards are installed for shipment, but you must remove and reinstall them when you install the server board. What Your Kit Includes Your kit includes the following components: • 2U rack
  • Intel SE7501WV2 | Product Guide - Page 8
    duct L. Flex bay (optional DVD/CD-ROM drive/FDD module available) M. Tape drive bay (tape drive available from others) N. Hard drive bay (one of six, accessory to system) O. Backplane board I. Front panel board Figure 1. System Components 8 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 9
    bezel and gently pull it towards you until it unsnaps from the chassis. AB C D E F A. Chassis handles (2) B. Drive bay (1-inch) C. HDD activity/fault Indicator D. Flex bay (optional DVD/CD-ROM drive/FDD module shown installed) E. Front panel indicator lights F. Tape drive bay (tape drive not
  • Intel SE7501WV2 | Product Guide - Page 10
    K. PS/2* mouse/keyboard connector L. RJ45 NIC 1 connector M. SCSI channel A connector (If available) N. Video connector O. USB connector 1 *480 Watt redundant power supply shown. Your power supply may be different. Figure 3. Chassis Back 10 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 11
    Front Panel Controls and Indicators Shown with optional DVD/CD-ROM drive/floppy disk drive installed. AB C D EF G L KJ Figure 4. Controls and Indicators A. NIC 2 activity LED B. Power button C. Power/sleep LED D. Fixed disk drive status LED E. System status LED F. ID LED G. ID button H. Reset
  • Intel SE7501WV2 | Product Guide - Page 12
    BIOS clears it. If the system is not powered down normally, it is possible that the Power LED will be blinking at the same time that the System Status LED is off due to a failure or configuration change that prevents the BIOS from running. 12 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 13
    options. B A A D C E A. Hard drive bays (6) B. Flex bay (1) C. DVD/CD-ROM drive/floppy disk drive module D. Tape drive E. Hard disk drive Figure 5. Peripherals OM14084 Hot Swappable SCSI Hard Drives The chassis ships with four drive carriers for mounting SCSI hard drives in the hard drive bays
  • Intel SE7501WV2 | Product Guide - Page 14
    may be added to provide cooling redundancy for system components. The system fans are mounted in a fan module located in the middle of the chassis to pull cooling air through the chassis. The power supply contains a single fan for cooling. 14 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 15
    peripherals and control panel, install the optional front bezel, which provides a key lock. The chassis also includes a preinstalled intrusion switch for the top access cover that can be monitored by server management software. When the cover is opened, the switch, located on the front panel board
  • Intel SE7501WV2 | Product Guide - Page 16
    16 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 17
    , make sure you have the following supplies available: • Anti-static wrist strap (recommended) • Server Chassis SR2300 accessory kit (included) • Server Board SE7500WV2 or SE7501WV2 SCSI kit • Processors and memory you purchased separately to add to the server board • Optional peripherals and add-in
  • Intel SE7501WV2 | Product Guide - Page 18
    • Sharp pins on connectors • Sharp pins on printed circuit assemblies • Rough edges and sharp corners on the chassis • Hot components (like processors, heat sinks, and power supply modules) • Damage to wires that could cause a short circuit 18 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 19
    in your region. • The connector that plugs into the AC receptacle on the power supply must be an IEC 320, sheet C13, type female connector. • In Europe, of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Resource CD and/or at http:\\support.intel.com.
  • Intel SE7501WV2 | Product Guide - Page 20
    injury or equipment damage can result. WARNING Do not open the power supply. Hazardous voltage, current and energy levels are present inside the power supply. Refer servicing of the power supply to qualified technical service personnel. 20 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 21
    thumb, slide the top cover back using the heel of your right hand on the blue pad. ✏ NOTE A non-skid surface or a stop behind the chassis may be needed if attempting to remove the top cover on a flat surface. 2. Set the cover aside and away from the immediate work area. A Figure
  • Intel SE7501WV2 | Product Guide - Page 22
    Remove the Processor Air Duct Lift the processor air duct out of the chassis. OM14583 Figure 7. Removing the Processor Air Duct 22 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 23
    Remove the Riser Cards 1. Insert your finger in the plastic loop. On riser card (A), also grasp the opposite end at (C). 2. Pull straight up and remove the riser card from the chassis. 3. Discard the protective blocks. A B Figure 8. Removing a Riser Card OM14087 Assembling the System 23
  • Intel SE7501WV2 | Product Guide - Page 24
    pushing on the tab, lift up on the module to clear the retention stub. 5. Slide the module towards the power supply until it comes free. 6. Lift the fan module out of the chassis. 3 2 1 C B A Figure 9. Removing the Fan module OM14088 24 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 25
    any server board support bumpers in the SR2300 chassis. chassis I/O openings. 4. Adjust board position so that the mounting holes rest securely on the corresponding shouldered standoffs (Figure 10, C). 5. Attach the board to the chassis using the three screws shipped in the chassis accessory kit
  • Intel SE7501WV2 | Product Guide - Page 26
    C A D OM14090 Figure 10. Mounting the Server Board SE7500WV2/SE7501WV2 26 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 27
    6. Install processors and memory, following the directions on the Quick Start User's Guide for SE7500WV2 or SE7501WV2. 7. If you only install one processor, you must install the processor air dam. a. Attach processor retention piece (B) to the server board (C) using the provided screws (A). b. Put
  • Intel SE7501WV2 | Product Guide - Page 28
    G. Fan module to server board fan connectors (2) H. To server board auxiliary signal connector from power supply I. To server board auxiliary power connector from power supply J. Serial cable from server board to knockout on back of chassis Figure 12. Cable Routing 28 Intel Server Chassis SR2300
  • Intel SE7501WV2 | Product Guide - Page 29
    on the server board. Firmly press the two connectors together until they are fully seated. B B A OM14616 Figure 13. Connecting the Main Power Cable Install the Fan module CAUTION When installing the fan module, avoid pinching cables routed in the area. 1. Note the raised tabs on the chassis floor
  • Intel SE7501WV2 | Product Guide - Page 30
    2 3 A C 1 B Figure 14. Installing the Fan module 5. Connect the fan power cables to the server board (Figure 15). OM14577 A OM14586 Figure 15. Connecting Fans to the Server Board 30 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 31
    Connect Flex Circuit Cable 1. Remove the flex circuit cable from the cable bag in the accessory kit. Connect the end marked "P1-Motherboard" to the floppy/front panel/IDE connector on the server board. Route the cable to the backplane board and connect the other cable end to the matching connector
  • Intel SE7501WV2 | Product Guide - Page 32
    the auxiliary power cable to the 8-pin auxiliary power connector on the server board (A). 2. Connect the signal cable to the 5-pin signal connector on the server board (B). B A OM14585 Figure 19. Connecting the Auxiliary Power Cables 32 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 33
    Finish Cable Routing 1. Connect the USB cable to the USB connector on the front panel. Route the cable along the top of the fan module and connect it to the server board. Make sure the cable does not lay on top of the corner of the backplane or it will get damaged when you
  • Intel SE7501WV2 | Product Guide - Page 34
    Figure 21. Installing the Power Supply Air Baffle 4. Connect the SCSI cable to the SCSI connector on the server board. Route the cable between the memory connectors and the full drives, a DVD/CD-ROM drive/floppy disk drive, and a tape drive. 34 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 35
    chassis centerline (see Figure 24, A, on page 37) supports three full-length, full-height PCI add-in cards or three LP cards (an LP card must be equipped with a standard full-height PCI mounting card has a card guide attached to the end opposite the metal bracket, remove the guide. 2. Insert the edge
  • Intel SE7501WV2 | Product Guide - Page 36
    D A B C OM14097 Figure 23. Installing a Full-Length PCI Card in a Riser Card 36 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 37
    board slot. 2. Firmly press the riser card straight down until it is fully seated in the server board slot. Make sure the tabs on the rear retention bracket are aligned with the holes in the chassis. 3. Install the other riser card in the same manner. A B A. Full-length riser card B. Low-profile
  • Intel SE7501WV2 | Product Guide - Page 38
    four screws (B) from the slide track (C). 4. Store the air baffle for future reinstallation in the event you must operate your server without a drive in one of the bays. A B C OM14099 Figure 25. Removing an Air Baffle from a Drive Carrier 38 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 39
    its wrapper and place it on an anti-static surface. 6. Set any jumpers and/or switches on the drive according to the drive manufacturer's instructions. 7. With the drive circuit-side-down (Figure 26, A), position the connector end (E) so that it is facing the back of the carrier (B). 8. Align the
  • Intel SE7501WV2 | Product Guide - Page 40
    and slide it back until you feel the connectors touch. 4. With your thumbs positioned above the handle bar indentations (D), push the module in until it locks in place. B A D CD Figure 27. Installing a DVD/CD-ROM drive/FDD Module OM14101 40 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 41
    NOTE If you are placing the server in a rack, wait to install the power cord until after the server is in the rack. 1. Attach the strain relief strap to the chassis (A). 2. Plug the power cord into the power supply but not into the power source. 3. Insert the power cord into the plastic loop (B) of
  • Intel SE7501WV2 | Product Guide - Page 42
    Install the Bezel Place the bezel between the chassis handles and push it toward the front of the chassis until it snaps into place. Figure 29. Installing the Bezel OM14108 42 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 43
    3 Installing the System in a Rack Your SR2300 chassis comes equipped with a rack mount kit that can be configured for front-mount, mid-mount, or 4-post racks. An optional slide rail kit may be purchased separately. Each kit contains instructions for installation into a rack or cabinet. If you need
  • Intel SE7501WV2 | Product Guide - Page 44
    BTU/hr more accurately for your configuration. An extra 500 BTU/hr over many systems would translate into a large error calculating air conditioning capacity. 44 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 45
    server after it has been set up. All references to left, right, front and rear are based on the reader facing the front of the chassis. Tools and Supplies 2. Turn off the system by pressing the power button on the front of the system. Then unplug the AC power cord from the system or wall outlet. 3.
  • Intel SE7501WV2 | Product Guide - Page 46
    performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Resource CD and/or at http:\\support.intel.com. These warnings tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. 46 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 47
    work inside the system, observe the safety guidelines on page 45. 2. Remove the bezel from the front of the chassis. 3. Pull the retention lever (A) toward you until the tab end (B) of the lever is free of the housing wrapper and place it on an anti-static surface. Working Inside Your Server 47
  • Intel SE7501WV2 | Product Guide - Page 48
    7. Set any jumpers and/or switches on the drive according to the drive manufacturer's instructions. A B C D OM14110 Figure 31. Removing a Hard Drive from a Carrier 8. Install baffle in any bays where you are not reinstalling a carrier/drive. 48 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 49
    ROM drive/FDD Module CAUTION A DVD/CD-ROM drive/FDD module is NOT hot swappable. Before replacing it, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system
  • Intel SE7501WV2 | Product Guide - Page 50
    . 9. Insert the riser card connector in the server board slot while aligning the tabs on the rear retention bracket with the holes in the chassis. 10. Firmly press the riser card straight down until it is seated in the server board slot. 50 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 51
    A B OM14112 Figure 33. Removing the Low-Profile PCI Riser Card Working Inside Your Server 51
  • Intel SE7501WV2 | Product Guide - Page 52
    A B OM14113 Figure 34. Removing the Full-Length PCI Riser Card 52 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 53
    Module The 500 Watt redundant power supply system consists of the power supply bay and either one or two power supply modules. The optional second module provides a redundant, 1+1 system. CAUTION If you do not have the second, redundant power supply module, you must take the server out of service
  • Intel SE7501WV2 | Product Guide - Page 54
    B, the power cables are not shown for clarity. 11. At the fan end of the power supply, remove the screw (C) that attaches the power supply to the standoff in the chassis floor. A C B D E OM14115 Figure 36. Replacing a Power Supply Cage 54 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 55
    screws at the rear of the chassis and the one screw at the fan end of the power supply. 15. Plug the main power connector into the server board. 16. Connect all other power cables to their devices. 17. Install the fan module and connect the fan power cables to the server board. 18. Install the full
  • Intel SE7501WV2 | Product Guide - Page 56
    the power supply until it comes free. 9. Lift the fan module out of the chassis. 3 2 1 C B A Figure 37. Removing the Fan module 10. Remove the fan blank from the fan module. A OM14088 B Figure 38. Removing the Fan Blank OM14587 56 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 57
    . Align the holes in the fan module with the raised tabs on the chassis and lower the fan module onto the chassis floor. 14. Slide the fan module toward the chassis sidewall until it has locked in place. 15. Plug the fan cables into the server board system fan connectors. 16. Make sure the USB cable
  • Intel SE7501WV2 | Product Guide - Page 58
    sure the USB cable is routed along the top of the fan module. 14. Connect the flex circuit cable to the backplane. 15. Install the flex circuit cable retention clip. 16. Install the full-height PCI riser card. 17. Replace the chassis cover. 58 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 59
    , observe the safety guidelines on page 45. 2. Remove the cover from the chassis. 3. Remove all hard drives and peripherals from their bays. 4. Remove the full-height PCI riser card assembly. 5. Remove the fan module. 6. Unplug all cables connected to the backplane board. 7. Remove the thumbscrew
  • Intel SE7501WV2 | Product Guide - Page 60
    the chassis being careful to insert the LED light pipes into the front panel holes. 7. Secure the board to the chassis with the thumbscrew. 8. Plug the USB and backplane cables back into the front panel board. 9. Replace the chassis cover. 60 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 61
    Remove the fan module. 6. Unplug all cables connected to the server board. 7. Remove any processors and DIMMs that you wish to use with the new board. (See the documentation that shipped with your server board.) 8. Remove the three mounting screws that secure the server board to the chassis (Figure
  • Intel SE7501WV2 | Product Guide - Page 62
    and cooling problems. 15. Cable the new server board to the other system components. 16. Install the fan module. 17. Install the PCI riser cards. 18. Replace the chassis cover. 19. Connect any cables removed from the rear I/O of the chassis. 62 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 63
    instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide Regulatory Compliance The server chassis SR2300 subassembly, when correctly integrated per this guide, complies with
  • Intel SE7501WV2 | Product Guide - Page 64
    Product Regulatory Compliance Markings The server chassis SR2300 will be marked with the following regulatory markings. cULus Listing Marks German GS Marking (Class A) Russia GOST R Marking Korea RRL MIC Mark China Compulsary Certification 64 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 65
    Type: SR2300 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Intel
  • Intel SE7501WV2 | Product Guide - Page 66
    for Interference (VCCI) from Information Technology Equipment. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. 66 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 67
    .com/go/serverbuilder If you do not have access to Intel's web address please contact your local Intel representative. • Server Chassis SR2300 (base chassis is provided with power supply and fans)UL listed. • Server boardyou must use an Intel Server Board - UL Recognized. • Add-in boardsmust have
  • Intel SE7501WV2 | Product Guide - Page 68
    68 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 69
    information about your system. You will need some of this information when you run the SSU. Item Chassis Manufacturer Name and Model Number Serial Number Date Installed Server Board Processor Speed and Cache Video Display Video Controller Keyboard Mouse 3.5-inch Drive CD-ROM Drive Hard
  • Intel SE7501WV2 | Product Guide - Page 70
    Equipment Log (continued) Item Hard Disk Drive 7 Manufacturer Name and Model Number DAT Tape Drive Serial Number Date Installed 70 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 71
    Power Usage Worksheet 1 Current (maximum) at voltage level: Device +5 Vsb +3.3 V +5 V Boards, processors, and memory (get totals from your board manual) SCSI 5th hot swap hard drive 6th hot swap hard drive 7th hot swap hard drive Cooling fans (3 or 4) 60 mm, 1.2 A each on 12 V +12 V -12 V
  • Intel SE7501WV2 | Product Guide - Page 72
    for each voltage level ________ W ________ W ________ W ________ W ________ W ________ W CAUTION Do not overload: As an overall current usage limitation on the power supply, do not exceed a combined power output of 250W for all DC outputs. 72 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 73
    all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Resource CD and/or at http:\\support.intel.com. WARNING: English (US) AVERTISSEMENT: Français WARNUNG: Deutsch AVVERTENZA: Italiano
  • Intel SE7501WV2 | Product Guide - Page 74
    . 6. Do not operate the system with the chassis covers removed. After you have completed the six SAFETY steps above, you can remove the system covers. To do this: 1. Remove and save all screws from the covers. 2. Remove the covers. continued 74 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 75
    AC power cord(s) to the system. A microprocessor and heat sink may be hot if the system has been running. Also, there may be sharp pins and edges on some board and chassis parts. outlet. • Provided with sufficient space to access the power supply cord(s), because they serve as the product's main
  • Intel SE7501WV2 | Product Guide - Page 76
    panneaux du système. Procédez comme suit: 1. Retirez toutes les vis des panneaux et mettez-les dans un endroit sûr. 2. Retirez les panneaux. suite 76 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 77
    . Remplacer uniquement avec une batterie du même type ou d'un type équivalent recommandé par le fabricant. Disposez des piles usées selon les instructions du fabricant. Le système a été conçu pour fonctionner dans un cadre de travail normal. L'emplacement choisi doit être: • Propre et dépourvu de
  • Intel SE7501WV2 | Product Guide - Page 78
    SICHERHEITSSCHRITTE durchgeführt haben, können Sie die Abdeckung abnehmen, indem Sie: 1. Entfernen Sie alle Schrauben der Gehäuseabdeckung. 2. Nehmen Sie die Abdeckung ab. Fortsetzung 78 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 79
    WARNUNG: Deutsch (Fortsetzung) Zur ordnungsgemäßen Kühlung und Lüftung muß die Gehäuseabdeckung immer wieder vor dem Einschalten installiert werden. Ein Betrieb des Systems ohne angebrachte Abdeckung kann Ihrem System oder Teile darin beschädigen. Um die Abdeckung wieder anzubringen: 1. Vergewissern
  • Intel SE7501WV2 | Product Guide - Page 80
    , togliere le coperture del telaio del sistema come seque: 1. Togliere e mettere in un posto sicuro tutte le viti delle coperture. 2. Togliere le coperture. continua 80 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 81
    sistema è progettato per funzionare in un ambiente di lavoro tipo. Scegliere una postazione che sia: • Pulita e libera da particelle in sospensione (a parte la normale polvere presente nell'ambiente). • Ben ventilata e lontana da fonti di calore, compresa la luce solare diretta. • Al riparo da urti
  • Intel SE7501WV2 | Product Guide - Page 82
    todos los cables enchufados a los conectores E/S o a los puertos situados en la parte posterior del sistema. 5. Cuando manipule los componentes, es importante protegerse contra la tornillos de las tapas. 2. Extraiga las tapas. continúa 82 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 83
    las instrucciones del fabricante. El sistema está diseñado para funcionar en un entorno de trabajo normal. Escoja un lugar: • Limpio y libre de partículas en suspensión (salvo el polvo normal). • Bien ventilado y alejado de fuentes de calor, incluida la luz solar directa. • Alejado de fuentes de
  • Intel SE7501WV2 | Product Guide - Page 84
    84 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 85
    ® chassis subassembly and all of its various components and software delivered with or as part of the Products) to be delivered hereunder, if properly used and installed, will be free from defects in material and workmanship and will substantially conform to Intel's publicly available specifications
  • Intel SE7501WV2 | Product Guide - Page 86
    the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights that vary from jurisdiction to Warranty, the English language version shall control. 86 Intel Server Chassis SR2300 Subassembly Product Guide
  • Intel SE7501WV2 | Product Guide - Page 87
    instructions: http://support.intel.com/support/motherboards/draform.htm In Europe and in AsiaContact your original authorized distributor for warranty service 803-65-7249 800-6310003 IDD call +63(2)6368416 (0006517) 830-3634 Manual toll free. From India, you need an IDD-equipped phone. IDD call
  • Intel SE7501WV2 | Product Guide - Page 88
    Returning a Defective Product Before returning any product, call your authorized dealer/distribution authority. 88 Intel Server Chassis SR2300 Subassembly Product Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Intel
®
Server Chassis SR2300
Subassembly Product Guide
A Guide for Technically Qualified Assemblers of Intel
®
Identified Subassemblies/Products
Order Number:
A86100-003