Intel SR1630GP Service Guide - Page 38
Configuration Jumper Descriptions, Jumper Name, Jumper Purpose
UPC - 735858211871
View all Intel SR1630GP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Jumper Name Jumper Purpose BIOS Recovery Password Clear CMOS Clear BMC Force Update Jumper in normal position (pins 1-2) allows normal system operation with correct BIOS settings. System will POST normally. Jumper in maintenance mode (pins 2-3) allows Intel® AMT setting/ password reset. Jumper removed is used to recover from a corrupted BIOS. Bootable media with a valid BIOS ROM required. Jumper in normal position (pins 1-2) allows the system to successfully POST and boot to the operating system environment. BIOS settings are kept intact. Jumper in clear position (pins 2-3) initiates a clearing of password. Jumper in normal position (pins 1-2) allows the system to successfully POST and boot to the operating system environment. BIOS settings are kept intact. Jumper in clear position (pins 2-3) initiates a clearing of NVRAM following POST. A system message confirms the CMOS clear operation was successful. This setting enforces default BIOS settings, which you can change by entering setup pressing F2, then exiting setup pressing F10 and saving changes. Jumper in normal position (pins 1-2) disables BMC firmware force update. Jumper in clear position (pins 2-3) allows BMC firmware force update. Figure 9. Configuration Jumper Descriptions 16 Intel® Server System SR1630GP / SR1630HGP Service Guide