Intel SR1640TH Technical Product Specification - Page 35
Video, 5.2.2.3, Availability, 5.2.3, Media Redirection, 5.2.4, Web Services for Management
View all Intel SR1640TH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Intel® Server System SR1640TH TPS Functional Architecture 2.5.2.2.2 Video Video output from the KVM subsystem is equivalent to the video output on the local console. Video redirection is available after video is initialized by the system BIOS. The KVM video resolution and refresh rates will always match the values set in the operating system. 2.5.2.2.3 Availability The default inactivity timeout is 30 minutes; however, this can be changed through the embedded web server. Remote KVM activation does not disable the local system keyboard, video, or mouse. Unless the feature is disabled locally, remote KVM is not deactivated by local system input. KVM sessions persist across system reset but not across an AC power loss. 2.5.2.3 Media Redirection The embedded web server provides a Java applet to enable remote media redirection. This may be used in conjunction with the remote KVM feature or as a standalone applet. The media redirection feature is intended to allow system administrators or users to mount a remote IDE or USB CD-ROM, floppy drive, or a USB flash disk as a remote device to the server. Once mounted, the remote device appears just like a local device to the server, allowing system administrators or users to install software (including operating systems), copy files, update the BIOS, and so forth, or boot the server from this device. The following capabilities are supported: The operation of remotely mounted devices is independent of the local devices on the server. Both remote and local devices are usable in parallel Either IDE (CD-ROM, floppy) or USB devices can be mounted as a remote device to the server. It is possible to boot all supported operating systems from the remotely mounted device and to boot from disk IMAGE (*.IMG) and CD-ROM or DVD-ROM ISO files. Refer to the Tested/supported Operating System List for more information. It is possible to mount at least two devices concurrently. The mounted device is visible to (and useable by) the managed system's operating system and BIOS in both pre-boot and post-boot states. The mounted device shows up in the BIOS boot order and it is possible to change the BIOS boot order to boot from this remote device. It is possible to install an operating system on a bare metal server (no operating system present) using the remotely mounted device. This may also require the use of KVM-r to configure the operating system during install. If either a virtual IDE or virtual floppy device is remotely attached during system boot, both virtual IDE and virtual floppy are presented as bootable devices. It is not possible to present only a single mounted device type to the system BIOS. The default inactivity timeout is 30 minutes, but may be changed through the embedded web server. Media redirection sessions persist across system reset but not across an AC power loss. 2.5.2.4 Web Services for Management (WS-MAN) The Integrated BMC firmware supports the Web Services for Management (WS-MAN) specification, version 1.0. Revision 1.0 23 Intel order number: E94847-001