Intel SR2520SAFRNA User Guide - Page 90
Clearing the Password
![]() |
UPC - 735858197311
View all Intel SR2520SAFRNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Obtaining the Upgrade Download the BIOS image file to a temporary folder on your hard drive. See "Server System References" for a link to the update software. Note: Review the instructions and release notes that are provided in the readme file distributed with the BIOS image file before attempting a BIOS upgrade. The release notes contain critical information regarding jumper settings, specific fixes, or other information to complete the upgrade. Upgrading the BIOS Follow the instructions in the readme file that came with the BIOS upgrade. When the update completes, remove the bootable media from which you performed the upgrade. Caution: Do not power down the system during the BIOS update process! The system will reset automatically when the BIOS update process is completed. Note: You may encounter a CMOS Checksum error or other problem after reboot. If this happens, shut down the system and boot it again. CMOS checksum errors require that you enter Setup, check your settings, save your settings, and exit Setup. Clearing the Password If the user or administrator password(s) is lost or forgotten, moving the password clear jumper into the "clear" position clears both passwords. The password clear jumper must be restored to its original position before a new password(s) can be set. 1. Power down the system and disconnect the AC power. 2. Open the server chassis. 3. Move the jumper from the normal operation position, Password Clear Protect, at pins 1 and 2 to the Password Clear Erase position, covering pins 2 and 3. CMOS CLR PASSWORD CLR Default Default 2 CLEAR 2 CLEAR 3 CMOS 3 PASSWORD J1J1 J1J2 Figure 56. Clear Password Jumper AF000187 68 Intel® Server System SR2520SA User's Guide
![](/manual_guide/products/intel-sr2520sax-user-guide-9131fdb/90.png)