Intel SR2600URLXNA User Manual - Page 7

Midplane2- order two additional 2.5" HDD drive carriers (FXX25HDDCAR). To add Standard Control Panel - order ASR1625FP. *Note: Only one control panel (Mini or Standard) can be used in a system at a time. *Note: Standard CP, LCP and the two right most drives (7&8) are installed in the same bay, and can not be installed at the same time. SR1625URSASNA 901136 NA SR2600URBRP 901093 735858206761 For complete list of accessories - please reference section 2. Same as above but with North American power cord Intel Server System SR2600UR system in base-passive 1 configuration. Includes: • Intel Server Board S5520UR • Intel Server Chassis SR2600 • Standard control panel • 5 3.5" HDD carriers • 3 fixed, non redundant fans • Tape drive bay filler • 1 riser with three full-height PCI Express 2.0 x8 wired slots (one x16 and two x8 connectors), • Passive (pass-through, no SAS controller) SATA Midplane, cabled to SATA ports on motherboard . SAS drives can be supported by adding discreet SAS controller. • Backplane with proprietary cable-less connection to Midplane, supporting up to 6 hot-swap SAS/SATA drives. Discrete SAS controller must be added to system to support SAS drives. • Bridge board • 7 DIMM blanks • 2 processor heatsinks • 1 hot-swap and redundant capable high-efficient 750W power supply • 2 chassis front handles in the box (ears) Note(1): To enable SAS drives - add-in SAS adapter is required. SATA drives can be used in out of the box system. Key Optional accessories: To enable power supply redundancy - order AXX750WPS To upgrade cooling system to redundant- order ASR2600LXFANS. To add support for 6th hot-swap 3.5 inch drive - order ASR2500SIXDRV To change PCI expansion slots - included riser must be replaced with ASR26XXFHLPR or ASR26XXFHXR To add support for SATA Tape Drive - order ASR2500SATAPE *NOTE: ASR2500SIXDRV and ASR2500SATAPE are installed in the same bay and can not be installed at the same time. For complete list of accessories - please reference section 2. 7