Intel SR2600URLXNA User Manual - Page 9
SR2600URSATANA, SR2625URBRP, Key Optional Accessories, Intel Server System SR2625UR in base-passive
View all Intel SR2600URLXNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
connector and 2 low-profile x8 connectors) • Passive (pass-through, no SAS controller) SATA Midplane, cabled to SATA ports on motherboard . SAS drives can be supported by adding discreet SAS controller. • Backplane with proprietary cable-less connection to Midplane, supporting up to 6 hot-swap SAS/SATA drives. • Bridge board • 7 DIMM blanks • 2 processor heatsinks • 2 hot-swap and redundant capable high-efficient 750W power supply • 2 chassis front handles in the box (ears) Key Optional Accessories: To enable power supply redundancy - order AXX750WPS To add PCI-X support - included riser must be replaced with ASR26XXFHXR To add support for 6th hot-swap 3.5 inch drive - order ASR2500SIXDRV To add support for SATA Tape Drive - order ASR2500SATAPE *NOTE: ASR2500SIXDRV and ASR2500SATAPE are installed in the same bay and can not be installed at the same time. For complete list of accessories - please reference section 2. SR2600URSATANA Same as above but with North American power cord 1 903802 NA SR2625URBRP Intel Server System SR2625UR in base-passive 1 900989 configuration. Includes: 735858206785 • Intel Server Board S5520UR • Intel Server Chassis SR2625 • Standard control panel • 6 2.5" HDD carriers (and filler in slots 7&8) • 3 fixed, non redundant fans • Tape drive bay filler • 1 full-height riser with three PCI Express 2.0 x8 wired slots (one x16 connector and two x8 connectors) • Passive (pass-through, no SAS controller) SATA Midplane, cabled to SATA ports on motherboard . SAS drives can be supported by adding discreet SAS controller. • Backplane with proprietary cable-less connection to Midplane, supporting 8 hot-swap SAS/SATA drives. Discrete SAS controller must be added to system to support SAS drives. • Bridge board • 7 DIMM blanks • 2 processor heatsinks • 1 hot-swap and redundant capable high-efficient 750W power supply • 2 chassis front handles in the box (ears) Note(1): To enable SAS drives - add-in SAS adapter is 9