Intel SR4850HW4 Product Guide - Page 58

3 Intel® Server Deployment Toolkit The Intel® Server Platforms SR4850HW4 and SR6850HW4 Deployment Toolkit is a CD that provides the following contents: ƒ Utilities: - SEL Viewer Utility - FRU Viewer Utility - System Configuration Wizard (SCW) - System Configuration Utility (Syscfg) ƒ The Intel® Server Platform SR4850HW4 and SR4850HW4/M User Guide (this document) ƒ Adobe* Acrobat Reader The Intel® Server Platforms SR4850HW4 and SR6850HW4 Deployment Toolkit comes with an HTML user interface that can be used to: ƒ Access the drivers for the on-board components for the various operating systems. ƒ Run the Platform Confidence Tests. ƒ Run the Server Configuration Wizard to setup the server for out-of-band functionality. ƒ Put the utilities onto a CD-ROM disk or USB flash memory device.  NOTES For information on creating a DOS bootable USB flash memory device, see "Creating a DOS bootable USB flash device". To create a DOS-bootable CD ROM see the instructions that came with your CD ROM burning software. Running Software Utilities from the CD The following procedure allows you to run the software utilities directly from the Intel® Server Platforms SR4850HW4 and SR6850HW4 Deployment Toolkit CD. 1. Insert the Intel® Server Platforms SR4850HW4 and SR6850HW4 Deployment Toolkit CD into the server's CD-ROM drive. 2. Turn on the system. Allow the system to boot to the CD. 3. Exit the SCW utility. 4. At the DOS prompt, type dir 5. Select the directory for the utility you would like to run. Type cd directoryname , to change directories. 6. Type filename.exe , to run the utility, where filename.exe is the executable program for the utility.