Intel SR4850HW4 Product Guide - Page 79
Starting the System Configuration Wizard
UPC - 735858179720
View all Intel SR4850HW4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
The SCW does not perform the following functions: Install and / or update the BIOS. Install and / or update the firmware. The SCW and Intel® Server Management (ISM) can each be used to configure the firmware on the server, but these items only need to be configured once. If you are installing the Intel® Server Management software on this server, you do not need to use the SCW to configure LAN channel 1, the serial channel, or users. The Intel® Server Management software will allow you to configure these items later, from the operating system. The SCW will ask you if you are using Intel® Server Management software and not prompt you to configure these items if you are using Intel® Server Management. On some screens in the SCW application, you can choose multiple entries. These selection options have square check-boxes, not round radio selection buttons. When multiple selections are permitted, the SCW will configure each item you select. Some options require other options to be selected. In these cases, the SCW automatically selects the options required for the options that you selected. The reverse is also true. If an option is unchecked, then all options dependent on that option are automatically unchecked. Starting the System Configuration Wizard To run the SCW, boot your server from the Intel® Server Platforms SR4850HW4 and SR6850HW4 Deployment Toolkit CD. The Start screen provides a brief description of the Server Configuration Wizard. Figure 22. System Configuration Wizard Start Screen Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide 79