Intel SR6850HW4 Product Guide - Page 207

10 Servicing the Intel® Management Module The Intel® Management Module connects to the main board. The Intel® Management Module provides the server management firmware and functionality for the system.  NOTE Do not install the Intel® Management Module or the GCM that is included with product code AXXIMMADV. The correct Intel® Management Module product code for the Intel® Server Platform SR6850HW4 is AXXIMMADV2. The GCM features are included in the Intel® Server Platform SR6850HW4. You do not need to install the GCM. If the wrong product code is used and you use the GCM that is included with product code AXXIMMADV, your server will not function correctly. The first time a server is booted with a new Intel® Management Module update the BMC with firmware to ensure correct operation. Installing and Removing the Intel® Management Module Installing the Intel® Management Module 1. Observe the safety precautions, warnings, and cautions described in "Safety Information", page 5. 2. Turn off all peripheral devices connected to the system. 3. Power down the system and unplug both AC power cords. 4. Remove the top cover. For instructions, see "Removing the Top Cover", page 144. 5. Remove the memory boards or memory board air baffles from Slots A and B. For instructions, see "Cold Removal of Memory Board", page 165. 6. Remove the Intel® Management Module from the antistatic bag. 7. Align the pin on the Intel® Management Module with the hole in the main board. See letter "A" in Figure 113. 8. Align the connector on the Intel® Management Module with the connector on the main board. See letter "B" in the figure. 9. Press the Intel® Management Module gently, but firmly into the connector until it is fully seated. 207