Intel SRCSASBB8I Hardware User Guide - Page 8
Intel® RAID Controller SRCSASBB8I, Protocol Support, Operating System Support, Usability - linux
UPC - 735858201346
View all Intel SRCSASBB8I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Intel® RAID Controller SRCSASBB8I The Intel® RAID Controller SRCSASBB8I is an intelligent low-profile RAID adapter with an integrated LSI* 1078 RAID-On-Chip chipset, providing both a SAS controller and RAID engine. With 256 MB RAM built onto the board and eight independent ports using two SFF-8087 mini multi-lane connectors, this controller supports up to 32 enterprise-class SAS or SATA devices and 64 logical drives. The PCI-Express* connector fits into an x8 or x16 PCI-Express slot capable of 2.5 Gbps per lane over PCI Express* x4 with a 3.0 Gbps point to point transfer rate. The SAS controller supports the ANSI Serial Attached SCSI (SAS) standard, version 1.0 and the Serial ATA (SATA) protocol defined by the Serial ATA specification, version 1.0a. Protocol Support • Serial SCSI Protocol (SSP): Communication with other SAS devices. • SATA II Protocol: Communication with other SATA II devices. • Serial Management Protocol (SMP): Topology management information sharing with expanders. • Serial Tunneling Protocol (STP) support for SATAII through expander interfaces. Operating System Support • Windows Server 2003*, Windows 2000* Enterprise Server, SP4 and Windows XP*. • Red Hat* Enterprise Linux 3.0, 4.0, ad 5.0. • SuSE* Linux Enterprise Server 9, SP1-3 and SLES 10. The operating systems supported may not be supported by your server board. See the tested operating system list for your server board at http://support.intel.com/support/motherboards/server/. See also the tested hardware and operating system list for the Intel® RAID Controller SRCSASBB8I to make sure the RAID card supports your operating system. Usability • The card ships with both a standard and a low-profile bracket. • Small, thin cabling with serial point-to-point 3.0 Gbps data transfer rates. • Support for non-disk devices and mixed capacity drives. • Support for intelligent XOR RAID levels 0, 1, 5, 6, 10, 50, and 60. • Dedicated or global hot spare with auto rebuild if an array drive fails. • User defined stripe size per drive: 8, 16, 32, 64 (def), 128, 256, 512, or 1024 KB. 2 Intel® RAID Controller SRCSASBB8I Hardware User's Guide