Intel SRCSASPH16I Hardware User Guide

Intel SRCSASPH16I - RAID Controller Manual

Get Intel SRCSASPH16I - RAID Controller PDF manuals and user guides
UPC - 735858201339
View all Intel SRCSASPH16I manuals
Add to My Manuals
Save this manual to your list of manuals

Intel SRCSASPH16I manual content summary:

  • Intel SRCSASPH16I | Hardware User Guide - Page 1
    Intel® RAID Controller SRCSASPH16I Hardware Guide Intel Order Number: E33256-001 Intel® RAID Controller SRCSASPH16I Hardware Guide i
  • Intel SRCSASPH16I | Hardware User Guide - Page 2
    or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as the property of others. Copyright © 2008 by Intel Corporation. Portions Copyright 2005-2007 by LSI Logic Corporation. All rights reserved. ii Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 3
    primary reference and user's guide for the Intel® RAID Controller SRCSASPH16I, which can be used for SAS and SATA disk drives. It contains installation instructions and specifications. For details on how to configure the storage adapters, and for an overview of the software drivers, see the Software
  • Intel SRCSASPH16I | Hardware User Guide - Page 4
    iv Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 5
    Figures Figure 1. Inserting the Intel® RAID Controller SRCSASPH16I into a PCI Express* Slot...8 Figure 2. Connecting the Disk Drive 9 Figure 3. SAS and SATA Plugs and SAS Backplane Connector 10 Figure 4. Card Layouts...12 Intel® RAID Controller SRCSASPH16I Hardware Guide v
  • Intel SRCSASPH16I | Hardware User Guide - Page 6
    vi Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 7
    Summary of SAS RAID Controller Features 1 Usability ...2 Redundancy and Error Handling 3 SAS and SATA Features 4 Online Capacity Expansion and RAID Level Migration Rules 4 Beep Codes ...5 Benefits of Serial Attached SCSI (SAS 5 Chapter 2, Intel® RAID Controller SRCSASPH16I Hardware Installation
  • Intel SRCSASPH16I | Hardware User Guide - Page 8
    viii Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 9
    Table 3. Array Performance Features 14 Table 4. Fault Tolerance Features 15 Table 5. Maxium Power Requirements 16 Table 6. Environmental Specifications 16 Table 7. Storage and Transit Specifications 16 Intel® RAID Controller SRCSASPH16I Hardware Guide ix
  • Intel SRCSASPH16I | Hardware User Guide - Page 10
    Features The Intel® RAID Controller SRCSASPH16I is an intelligent low-profile RAID adapter with: • An Intel® IOP333 I/O processor running at 500 MHz. • An LSI 1068 SAS (including SATA) controller. • 256 MB RAM. • Sixteen independent internal ports provided via four SFF8087 connectors. • Support for
  • Intel SRCSASPH16I | Hardware User Guide - Page 11
    Online RAID level migration (upgrade of RAID mode, may require OCE). - Drive migration. - Drive roaming. - No reboot necessary after expansion. • An upgradeable Flash ROM interface. • Allows for staggered spin up, hot plug, lower power consumption. Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 12
    . Redundancy and Error Handling • Enclosure management support, including LEDs. • Activity and fault indicators controller and drive firmware, SMART monitor, SAF-TE controller. • Failures are logged in NVRAM, viewable from OS Event Log, Intel® RAID Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 13
    in a logical array. • Migration and OCE cannot be done on Spanned Arrays (RAID 10, 50). • Migrations supported are: RAID 1 to RAID 0, RAID 5 to RAID 0. • With OCE, migrations supported are RAID 0 to RAID 1, RAID 0 to RAID 5, RAID 1 to RAID 5. Intel® RAID Controller SRCSASPH16I Hardware Guide 4
  • Intel SRCSASPH16I | Hardware User Guide - Page 14
    with Serial ATA technology. The SAS and SATA protocols use a thin, 7-wire connector instead of the 68-wire SCSI cable or 40-wire ATA cable. The SAS/SATA connector and cable are easier to manipulate, allow connections to smaller devices, and do 5 Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 15
    not inhibit airflow. The point-to-point SATA architecture eliminates inherent difficulties created by the legacy ATA master-slave architecture, while maintaining compatibility with existing ATA firmware. Intel® RAID Controller SRCSASPH16I Hardware Guide 6
  • Intel SRCSASPH16I | Hardware User Guide - Page 16
    PCI Express* slot. • The Resource CD, which contains drivers and documentation. • The cables provided with the RAID controller. • SAS or SATA hard disk drives. Intel Corporation strongly recommends using an uninterruptible power supply (UPS). 7 Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 17
    for instructions. 3. Align the controller's Intel® RAID Controller SRCSASPH16I into a PCI Express* Slot 5. Connect the provided internal cables into the adapter using the 4-port combined end. Make sure the controller and cables are properly attached. Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 18
    you needed to disconnect. 9. Turn the power on to the server and hard drives. As the server powers up, listen to be sure that the SAS and SATA devices are powered up before or at the same time as the computer boots. 9 Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 19
    Recept acle Connector Serial A TA Power SATA Physical Link Power SAS Secondary Physical Link SATA/SAS Primary Physical Link Note: SA TA backplane connectors will NOT accept SAS drives Figure 3. SAS and SATA Plugs and SAS Backplane Connector Intel® RAID Controller SRCSASPH16I Hardware Guide 10
  • Intel SRCSASPH16I | Hardware User Guide - Page 20
    After performing the Intel® RAID Controller SRCSASPH16I installation, you must configure the storage adapter and install the operating system driver. The Software User's Guide instructs you on the configuration options and how to set them on your RAID Controller SRCSASPH16I, and provides detailed
  • Intel SRCSASPH16I | Hardware User Guide - Page 21
    support for front panel drive fault per header (8-15) port (8-15). J4 Internal SAS/SATA SFF8087 Connection to SAS/SATA devices. port connector, ports 12-15 J5 Internal SAS/SATA SFF8087 Connection to SAS/SATA devices. port connector, ports 8-11 Intel® RAID Controller SRCSASPH16I Hardware
  • Intel SRCSASPH16I | Hardware User Guide - Page 22
    and implementation of the Intel® RAID Controller SRCSASPH16I minimizes electromagnetic emissions, susceptibility to radio frequency energy, and the effects of electrostatic discharge. See the appendices for regulatory marks and certifications. 13 Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 23
    ® RAID Controller SRCSASPH16I Intel® 80333 I/O processor at 500 MHz +3.3 V, +12 V Full-height PCI Express* adapter card size (6.6 inches by 4.2 inches) PCI Express* Rev 1.0A, x8 lane width 2.5 Gbps 3 GBps per port, point-to-point One LSI SAS 1068 controller 4x4 internal ports. Supports 122 SAS/SATA
  • Intel SRCSASPH16I | Hardware User Guide - Page 24
    Intel® RAID Controller SRCSASPH16I Self Monitoring Analysis and Reporting Technology (SMART) support Detects up to 70% of all predictable disk drive failures and monitors the internal performance of all motors, heads, and drive electronics. Optional Battery Backup Intel® RAID Smart Battery
  • Intel SRCSASPH16I | Hardware User Guide - Page 25
    Temperature range without battery -30 degrees Centigrade to +80 degrees Centigrade (dry bulb) Temperature range with battery 0 degrees Centigrade to 45 degrees Centigrade (dry bulb) Relative humidity range 5% to 90 % noncondensing Intel® RAID Controller SRCSASPH16I Hardware Guide 16
  • Intel SRCSASPH16I | Hardware User Guide - Page 26
    compliance statement, Korean MIC, Taiwan BSMI, and Japan VCCI. The adapter meets the requirements of CISPR Class B. Both the adapter and battery are CCSA C22.2, No. 60950-1, UL60950-1 First Edition listed accessory, UL filenumber E257743. 17 Intel® RAID Controller SRCSASPH16I Hardware Guide
  • Intel SRCSASPH16I | Hardware User Guide - Page 27
    information. See EEPROM. A piece of hardware (such as a video monitor, disk drive, printer, or CD-ROM) used with a computer and under the computer's control. SCSI peripherals are controlled through a SAS Intel® RAID Controller SRCSASPH16I. Intel® RAID Controller SRCSASPH16I Hardware Guide 18
  • Intel SRCSASPH16I | Hardware User Guide - Page 28
    version 1.0a. Each port on the SAS RAID controller supports SAS and SATA devices. Any device that conforms to the SAS standard and is attached to the SAS bus by a SAS cable. This includes SAS storage adapters (host adapters) and SAS peripherals. 19 Intel® RAID Controller SRCSASPH16I Hardware Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Intel® RAID Controller SRCSASPH16I Hardware Guide
i
Intel
®
RAID Controller SRCSASPH16I
Hardware Guide
Intel Order Number: E33256-001