Intel SRCSATAWB User Guide
Intel SRCSATAWB - RAID Controller Manual
 |
UPC - 735858198516
View all Intel SRCSATAWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Intel SRCSATAWB manual content summary:
- Intel SRCSATAWB | User Guide - Page 1
Intel® RAID Controller SRCSATAWB Hardware User's Guide Intel Order Number: D92006-001 - Intel SRCSATAWB | User Guide - Page 2
its subsidiaries in the United States and other countries. *Other names and brands may be claimed as the property of others. Copyright © 2007 by Intel Corporation. Portions Copyright 2005-2007 by LSI Logic Corporation. All rights reserved. ii Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 3
primary hardware guide for the Intel® RAID Controller SRCSATAWB, which can be used for SATA disk drives. It contains installation instructions and specifications. For details on how to configure the storage adapters, and for an overview of the software drivers, see the Software User's Guide on the - Intel SRCSATAWB | User Guide - Page 4
iv Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 5
® RAID Controller SRCSATAWB 1 Protocol Support ...1 Usability ...2 SATA Features of the 1078 Controller 4 Beep Codes ...5 Chapter 2, Intel® RAID Controller SRCSATAWB Hardware Installation 6 Requirements ...6 Install the RAID Controller ...6 Configure the RAID Controller 9 Replacing a Controller - Intel SRCSATAWB | User Guide - Page 6
1.0a. • SATA II Protocol: Communication with other SATA II devices. • Serial Management Protocol (SMP): Topology management information sharing with expanders. • Serial Tunneling Protocol (STP) support for SATAII through expander interfaces. 1 Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 7
for the RAID Controller SRCSATAWB to make sure the RAID card supports your operating system. Usability • The card ships with both a standard and a low-profile bracket. • Small, thin cabling with serial point-to-point 3.0 Gbps data transfer rates. • Support for non-disk devices and mixed capacity - Intel SRCSATAWB | User Guide - Page 8
reads. - I/O setting. Determines whether read operations check the cache before reading from disks. ✧ Cache I/O: Checks cache first, only reads disk if data is not in the cache. ✧ Direct I/O: Reads data directly from disk. (not cache) 3 Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 9
within one quad port. • Allows addressing of multiple SATA targets through an expander if using SATA 2.0- compliant hard disk drives. • Allows multiple initiators to address a single target (in a fail-over configuration) through an expander. Intel® RAID Controller SRCSATAWB Hardware User's Guide 4 - Intel SRCSATAWB | User Guide - Page 10
, choose Disable Alarm. To enable alarm, choose Enable Alarm. To disable alarm only until the next event or until next power cycle, choose Silence Alarm. 5 Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 11
4. Install the RAID controller into an available server system x4 or x8 PCI-Express* slot. See your server system documentation to locate an appropriate slot and for instructions on installing an add-in card. See also the following figure. Intel® RAID Controller SRCSATAWB Hardware User's Guide 6 - Intel SRCSATAWB | User Guide - Page 12
uses an advanced software stack that allows connections to SATA drives either directly or via SAS or SATA backplanes with or without expanders. • Route the cables carefully. Check that controller and cables are all properly attached. 7 Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 13
AF002211 Figure 3. Connecting Cables between the RAID Controller and Drives/Backplane 6. Install the server system cover and connect the power cords. See your server system documentation for instructions. Intel® RAID Controller SRCSATAWB Hardware User's Guide 8 - Intel SRCSATAWB | User Guide - Page 14
then display the RAID Controller SRCSATAWB number and firmware version. The numbering of the RAID controller follows the PCI slot scanning order used by the server board. 3. See the Intel® RAID Controller SRCSATAWB Quick Start User's Guide and the Software User's Guide for instructions to configure - Intel SRCSATAWB | User Guide - Page 15
For ports 4 - 7 port connector J10 Firmware recovery 2-pin jumper jumper This jumper needed only for flashes if the firmware is corrupted. The card does not function as a controller if this jumper is in place. Figure 4. Card Layout s Intel® RAID Controller SRCSATAWB Hardware User's Guide 10 - Intel SRCSATAWB | User Guide - Page 16
foltage Card size Array interface to host SATA bus speed Serial port SATA controller SATA ports Physical and virtual drive support Cache Firmware Compatible devices Cabling Redundant configuration Enclosure management Enclosure support Array support Intel® RAID Controller SRCSATAWB LSI* 1078 - Intel SRCSATAWB | User Guide - Page 17
on reboot Parity generation and checking, automatic consistency checking; patrol reads; activity and fault LEDs, alarm; multiple retries; logs in NVRAM, event log, CIM, Smart, Intel® RAID Web Console 2 Intel® RAID Controller SRCSATAWB Hardware User's Guide 12 - Intel SRCSATAWB | User Guide - Page 18
LFPM relative humidity non-condensing: 5%-90%. With battery 20-80% 10-90% condensing Safety Characteristics The Intel® RAID Controller SRCSATAWB meets or exceeds the requirements of UL flammability are lower than the SELV 42.4 V limit. 13 Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 19
Intel® RAID Controller SRCSATAWB Hardware User's Guide 14 - Intel SRCSATAWB | User Guide - Page 20
inserted properly. 6. Follow the instructions that came with your server system to remove the server cover. 7. Plug in and power on the system. The controller detects the RAID configuration from the configuration data on the drives (COD). 15 Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 21
Follow the instructions that came with your server system to remove the server cover. 10. Plug in and power on the system. When you start the system, the controller detects the RAID configuration from the configuration data on the drives. Intel® RAID Controller SRCSATAWB Hardware User's Guide 16 - Intel SRCSATAWB | User Guide - Page 22
on a rug. When working inside your computer: • Do not attempt to service the computer system yourself, except as explained in this guide and elsewhere in Intel documentation. Always follow installation and service instructions closely. • Turn off your computer and any peripherals. • Disconnect your - Intel SRCSATAWB | User Guide - Page 23
connect a cable, make sure both connectors are correctly oriented and aligned. • Handle components and cards with care. Don't touch the components or contacts on a card. Hold a card by its , use antistatic floor pads and workbench pads. Intel® RAID Controller SRCSATAWB Hardware User's Guide 18 - Intel SRCSATAWB | User Guide - Page 24
instructions. See also Intel Server Boards and Server Chassis Safety Information on the Resource CD and/or at http:\\support.intel.com\support peripheral devices connected cables, add-in cards, cables and the AC power cord(s) to the system. 19 Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 25
hierzu auch die Sicherheitshinweise zu Intel-Serverplatinen und -ServergehŠusen auf der Ressourcen-CD oder unter http:\\support.intel.com\support\motherboards\server\sb\cs-010770. das System niemals ohne ordnungsgemäß montiertes Gehäuse ein. Intel® RAID Controller SRCSATAWB Hardware User's Guide 20 - Intel SRCSATAWB | User Guide - Page 26
des Systems beschriften und ziehen Sie alle Anschlußkabel von den I/O Anschlüssen oder Ports ab. 5. Tragen Sie ein geerdetes Antistatik Gelenkband, um elektrostatische Ladungen (ESD) ü ausgeführt werden. Sie sollten Schutzhandschuhe tragen. 21 Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 27
-le afin de prévenir tout accès non autorisé à l'intérieur du système. 5. Rebranchez tous les cordons d'alimentation c. a. et câbles externes au système. Intel® RAID Controller SRCSATAWB Hardware User's Guide 22 - Intel SRCSATAWB | User Guide - Page 28
instruction. Consultez Intel Server Boards and Server Chassis Safety Information sur le CD Resource CD ou bien rendez-vous sur le site http:\\support.intel.com\support / apagado. 3. Desconecte todos los cables de alimentación CA del sistema o de Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 29
impedir que pueda accederse al mismo sin autorización. 5. Conecte todos los cables externos y los cables de alimentación CA al sistema. Si el sistema ha estado en funcionamiento in c.a. dalle prese a muro o dall'alimentazione di corrente. Intel® RAID Controller SRCSATAWB Hardware User's Guide 24 - Intel SRCSATAWB | User Guide - Page 30
di calore potrebbero essere surriscaldati. Fare attenzione alla presenza di piedini appuntiti e parti taglienti sulle schede e sul telaio. È consigliabile l'uso di guanti di protezione. 25 Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 31
(EMC) & 1997-42 (EMI) (Korea) Product Regulatory Compliance Markings The RAID Controller Card is marked with the following compliance markings. Some marking information may be provided CE Mark (Europe) • VCCI Mark (Japan) • MIC Mark (Korea) Intel® RAID Controller SRCSATAWB Hardware User's Guide 26 - Intel SRCSATAWB | User Guide - Page 32
Rules. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference CLASS B CANADA NMB-003 CLASSE B VCCI Marking (Class B) Japan 27 Intel® RAID Controller SRCSATAWB Hardware User's Guide - Intel SRCSATAWB | User Guide - Page 33
Compatibility Notices FCC Verification Statement (USA) : This device complies with Part 15 of the FCC Rules. Operation installed and used in accordance with the instructions, may cause harmful interference to radio communications Intel® RAID Controller SRCSATAWB Hardware User's Guide 28 - Intel SRCSATAWB | User Guide - Page 34
local Intel representative - Name of Certification Recipient: LSI Logic Corporation - Date of Manufacturer: Refer to date code on product - Manuation: LSI Logic Corporation Manufacturer/Nation / Refer to country of origin marked on product 29 Intel® RAID Controller SRCSATAWB Hardware User's Guide
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
 |
 |
Intel
®
RAID Controller SRCSATAWB
Hardware User’s Guide
Intel Order Number: D92006-001