Intel SRCU42X Hardware User Guide - Page 32

NonVolatile Random Access Memory. Actually an EEPROM Electronically Erasable Read

Page 32 highlights

NVRAM PCI and PCI-X Peripheral Devices SCSI Bus SCSI Device SCSI ID Single-Ended SCSI TolerANT Ultra SCSI Ultra2 SCSI Ultra160 SCSI Ultra320 SCSI VHDCI NonVolatile Random Access Memory. Actually an EEPROM (Electronically Erasable Read Only Memory chip) used to store configuration information. See EEPROM. Peripheral Component Interconnect. A high performance local bus specification that allows connection of devices directly to computer memory. The PCI Local Bus allows transparent upgrades from 32-bit data path at 33 MHz to 64-bit data path at 33 MHz, and from 32-bit data path at 66 MHz to 64-bit data path at 66 MHz. A piece of hardware (such as a video monitor, disk drive, printer, or CD-ROM) used with a computer and under the computer's control. SCSI peripherals are controlled through a SCSI SRCU42X controller (host adapter). A storage adapter (host adapter) and one or more SCSI peripherals connected by cables in a linear configuration. The adapter may exist anywhere on the bus, allowing connection of both internal and external SCSI devices. A system may have more than one SCSI bus by using a multi-channel adapter or by using multiple adapters. Any device that conforms to the SCSI standard and is attached to the SCSI bus by a SCSI cable. This includes SCSI storage adapters (host adapters) and SCSI peripherals. A way to uniquely identify each SCSI device on the SCSI bus. Each SCSI bus has eight available SCSI IDs numbered 0 through 7 (or 0 through 15 for Wide SCSI). The storage adapter (host adapter) usually gets the highest ID (7 or 15) giving it priority to control the bus. A hardware specification for connecting SCSI devices. It references each SCSI signal to a common ground. This is the most common method (as opposed to differential SCSI, which uses a separate ground for each signal). A technology developed and used by Intel to improve data integrity, data transfer rates, and noise immunity through the use of active negation and input signal filtering. A standard for SCSI data transfers. It allows a transfer rate of up to 20 Mbytes/s over an 8-bit SCSI bus and up to 40 Mbytes/s over a 16-bit SCSI bus. A standard for SCSI data transfers. It allows a transfer rate of up to 40 Mbytes/s over an 8-bit SCSI bus, and up to 80 Mbytes/s over a 16-bit SCSI bus. A standard for SCSI data transfers. It allows a transfer rate of up to 160 Mbytes/s over a 16bit SCSI bus. A standard for SCSI data transfers. It allows a transfer rate of up to 320 Mbytes/s over a 16bit SCSI bus. Very High-Density Cable Interconnect. This cable is used to connect external connectors to your storage adapter. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

32
NVRAM
NonVolatile Random Access Memory. Actually an EEPROM (Electronically Erasable Read
Only Memory chip) used to store configuration information. See EEPROM.
PCI and PCI-X
Peripheral Component Interconnect. A high performance local bus specification that allows
connection of devices directly to computer memory. The PCI Local Bus allows transparent
upgrades from 32-bit data path at 33 MHz to 64-bit data path at 33 MHz, and from 32-bit
data path at 66 MHz to 64-bit data path at 66 MHz.
Peripheral
Devices
A piece of hardware (such as a video monitor, disk drive, printer, or
CD-ROM) used with a computer and under the computer’s control. SCSI peripherals are
controlled through a SCSI SRCU42X controller (host adapter).
SCSI Bus
A storage adapter (host adapter) and one or more SCSI peripherals connected by cables in a
linear configuration. The adapter may exist anywhere on the bus, allowing connection of both
internal and external SCSI devices. A system may have more than one SCSI bus by using a
multi-channel adapter or by using multiple adapters.
SCSI Device
Any device that conforms to the SCSI standard and is attached to the SCSI bus by a SCSI
cable. This includes SCSI storage adapters (host adapters) and SCSI peripherals.
SCSI ID
A way to uniquely identify each SCSI device on the SCSI bus. Each SCSI bus has eight
available SCSI IDs numbered 0 through 7 (or 0 through 15 for Wide SCSI). The storage
adapter (host adapter) usually gets the highest ID (7 or 15) giving it priority to control the bus.
Single-Ended
SCSI
A hardware specification for connecting SCSI devices. It references each SCSI signal to a
common ground. This is the most common method (as opposed to differential SCSI, which
uses a separate ground for each signal).
TolerANT
A technology developed and used by Intel to improve data integrity, data transfer rates, and
noise immunity through the use of active negation and input signal filtering.
Ultra SCSI
A standard for SCSI data transfers. It allows a transfer rate of up to
20 Mbytes/s over an 8-bit SCSI bus and up to 40 Mbytes/s over a 16-bit SCSI bus.
Ultra2 SCSI
A standard for SCSI data transfers. It allows a transfer rate of up to
40 Mbytes/s over an 8-bit SCSI bus, and up to 80 Mbytes/s over a
16-bit SCSI bus.
Ultra160 SCSI
A standard for SCSI data transfers. It allows a transfer rate of up to 160 Mbytes/s over a 16-
bit SCSI bus.
Ultra320 SCSI
A standard for SCSI data transfers. It allows a transfer rate of up to 320 Mbytes/s over a 16-
bit SCSI bus.
VHDCI
Very High-Density Cable Interconnect. This cable is used to connect external connectors to
your storage adapter.