Intel SRSH4 Service Guide - Page 58
Status Indicators for Hot-Plug PCI Add-In Boards, Table 7., LED Hot-Plug PCI Status
UPC - 735858154932
View all Intel SRSH4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Without a driver, the operating system does not support hot-plug installation and removal of PCI add-in boards. In that case, you must treat all eight PCI slots as non-hot-plug slots and follow the instructions on pages 61 and 62 for installing and removing all PCI add-in boards. Checking the Status Indicators for a Hot-Plug Add-In Board A bank of LED indicators on the back panel of the electronics bay indicates the status of the hot-plug PCI add-in boards (Figure 29). A Status LED indicators Figure 29. Status Indicators for Hot-Plug PCI Add-In Boards Table 7 lists the LED states and the hot-plug PCI status indicated by each state. Table 7. LED Hot-Plug PCI Status Indicators Power LED State Status Green Power to slot Amber Fault on slot(lighting) Available for hot remove(flashing) Not lit No power to slot 58