Intermec CV30 CV30 Fixed Mount Computer With Windows CE User's Manual - Page 18
Attaching the CV30 to Power, Troubleshooting the Boot Process Clean Booting on, - battery
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 1 - Using the CV30 Fixed Mount Computer 2 From the Control Panel, Double-tap Stylus. The Stylus Properties dialog box appears. 3 Tap the Calibration tab > Recalibrate and follow the instructions to align the screen. If the touch screen is so out of alignment that you cannot open the Start menu, you may need to perform a clean boot. After the computer clean boots, it prompts you to align the screen. For more information on performing a clean boot, see "Troubleshooting the Boot Process (Clean Booting)" on page 89. Attaching the CV30 to Power For the CV30 to operate, you must provide power to the CV30 through a DC/DC power supply or an AC/DC power supply. The CV30 also has a backup battery to sustain all memory and applications when power is not supplied. You must have a power supply connected to the CV30 for it to operate. Use the AC power supply and power cord when you are using the CV30 with a desk mounting kit or a wall mounting kit. The AC power supply does not provide power for the internal touch screen heater. You must order the AC power supply and countryspecific power cord separately. There are two DC/DC power options for the CV30. You must order one of these DC/DC power options separately: • DC/DC heated/non-heated (6-60 VDC) power supply (P/N 203-779-001) • DC/DC heated/non-heated (15-96 VDC) power supply (P/N 203-832-001) For more information on installing the DC power options, see the CV30 Vehicle Power Supply Installation Guide (P/N 932-007001). 8 CV30 Fixed Mount Computer With Windows CE User's Manual