Intermec PB3 PB2 Mobile Printer User's Guide - Page 34
Printing a, Configuration Test on Enter Wireless DEVICE Address
View all Intermec PB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
16 In the Enter Wireless DEVICE Address field, enter the wireless device address from the configuration test page, and click OK. When the hardware configuration process is done, the Flash load message and bootloader message appear. 17 Print a configuration test page. For help, see "Printing a Configuration Test Page" on page 21. 18 Make sure that the Model Number, Serial Number, and Device Address on the test page you printed in Step 17 matches the information on the test page you printed in Step 1. 34 PB2 Mobile Printer User's Guide
34
PB2 Mobile Printer User’s Guide
16
In the
Enter Wireless DEVICE Address
field, enter the wireless
device address from the configuration test page, and click
OK
.
When the hardware configuration process is done, the Flash load
message and bootloader message appear.
17
Print a configuration test page. For help, see
“Printing a
Configuration Test Page” on page 21.
18
Make sure that the Model Number, Serial Number, and Device
Address on the test page you printed in Step 17 matches the
information on the test page you printed in Step 1.