Intermec PB42 CK60 and PB42 Battery Instructions

CK60 &

PB42

Battery (Model AB11) Instructions

The Model AB11 battery (P/N 318-015-002) is a rechargeable 17.3

Watt-hour, 7.2 V, Lithium-ion (Li-ion) battery.

Charging the Battery

You need to fully charge the battery before using it in your CK60

mobile computer or PB42 portable receipt printer. A fully discharged

battery charges in less than 4 hours.

Charging Accessory

Model

CK60 4-Position Battery Charger

AC4

PB42 4-Bay Battery Charger

AC10

CK60 4-Position Communications Dock

AD3

CK60 4-Position Charge-Only Communications Dock

AD4

CK60 Ethernet/USB Communications Dock

AD5

CK60 Modem/USB Communications Dock

AD6

CK60 Vehicle Dock

AV3

CK60 Mobile Computer

CK60

PB42 Portable Receipt Printer

PB42

CK60 and PB42 Battery (Model AB11) Instructions

*943-072-002*

P/N 943-072-002

Important Recommendations

Charge the battery before use.

y

See “Charging the Battery” for approved charging methods. Use of this

y

battery in other devices could result in damage to the device or battery.

The temperature range for charging batteries is 0°C to 45°C (32°F to

y

113°F). Do not charge battery packs outside this range. For maximum

battery life, charge batteries at 23°C (73°F).

Do not store the battery at temperatures above 60°C (140°F), such

y

as inside a car on a hot day or in direct sunlight, as this may damage

the battery.

Battery usage by children should be supervised

y

.

Do not disassemble or open, crush, bend or deform, puncture, shred, or

y

burn.

Do not modify the battery or attempt to insert foreign objects into the

y

battery.

Do not solder directly to the battery contacts.

y

Do not immerse the battery in water.

y

Do not short circuit the battery. Keep the battery connector away from

y

metallic items.

Do not apply mechanical shocks or pressure to the battery.

y

Avoid dropping the battery or the CK60 or PB42. If you suspect that

y

the battery or CK60 or PB42 is damaged, send it to an Intermec

service center for inspection.

Replace battery only with another AB11 battery. This battery has been

y

tested

in accordance with applicable safety standards. Contact your

Intermec sales representative or distributor if this battery is no longer

available.

Discarded batteries may create a safety hazard. Before disposal,

y

cover the battery connector with electrical insulating tape.

Specifications

Design and speciﬁcations are subject to change without notice.

Physical Specifications

Product:

Rechargeable 17.3 Watt-hour, 7.2 V lithium-ion

battery (Model AB11)

Dimensions:

70 x 41 x 25 mm (2.8 x 1.6 x 1.0 in)

Weight:

116.5 g (4.1 oz)

Capacity and Output Specifications

Maximum output:

x

8.4 V

Nominal output:

x

7.4 V

Capacity:

2.4 Ah

Temperature and Humidity Specifications

Operating temperature:

-20°C to 50°C (-4°F to 122°F)

Charging temperature:

0°C to 40°C (32°F to 104°F)

Storage temperature:

-30°C to 60°C (-22°F to 140°F)

Relative humidity:

5% to 95% non-condensing

Note:

In the U.S.A., the EPA does not consider spent Li-ion

batteries as hazardous waste.

Caution: This battery pack may ignite, create a chemical burn hazard, explode, or

release toxic materials if mistreated. Do not incinerate, disassemble, or heat above

100°C (212°F). Do not short circuit; may cause burns. Keep away from children. Use

only Intermec charger Models AC4, AC10, AD3, AD4, AD5, AD6, AV3, CK60 and

PB42. Use of incorrect charger may present a risk of ﬁre or explosion.

CONTAINS

LITHIUM-ION BATTERY. WASTE BATTERY MUST PROMPTLY BE RECYCLED

OR DISPOSED OF PROPERLY. SEE INSTRUCTIONS.

Proper Disposal of Waste Batteries

Some of the substances necessary for the proper functioning of batteries are considered harmful to the

environment and to human health. It is therefore important that those substances be kept out of the

environment.

You play an important role in the protection of the environment:

Keep all waste batteries out of unsorted trash.

1.

Dispose of all waste batteries in separate collection for treatment and recycling.

2.

Please contact Intermec for the collection option(s) available in your location.

Marking of the battery:

The wheeled-bin symbol indicates the requirement for separate collection of the battery.

1.

Two letters shown underneath the wheeled bin indicate the presence of a certain substance:

2.

Hg means Mercury is present

a.

Cd means Cadmium is present

b.

Pb means Lead is present

c.

The Moebius loop (chasing arrows) indicates that the battery is recyclable.

3.

Worldwide Headquarters

6001 36th Avenue West

Everett, Washington 98203

U.S.A.

tel

425.348.2600

fax 425.355.9551

www.intermec.com

© 2009 Intermec Technologies

Corporation. All rights reserved.

Intermec PB42 CK60 and PB42 Battery Instructions

Intermec PB42 Manual

Intermec PB42 manual content summary: