Intermec PD41 EasyLAN Ethernet Software for PD41/PD42 Instructions
Intermec PD41 Manual
 |
View all Intermec PD41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Intermec PD41 manual content summary:
- Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 1
Instructions EasyLAN Ethernet Software for the EasyCoder® PD41 and PD42 Printers - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 2
purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 3
5 Printer Firmware Requirements 5 Setting Network Parameters from the Printer Home Page . . .6 Setting Network Parameters with PrintSet 4 7 Setting Network Parameters With Fingerprint and IPL Commands 8 Setting IP Address Using ARP'n'PING 10 EasyLAN Ethernet Software Instructions iii - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 4
iv EasyLAN Ethernet Software Instructions - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 5
the firmware version is to print a test label (for help, see the EasyCoder PD41 Printer User's Guide (P/N 1-960652-xx)). If you have a PD42 printer, information about the current firmware version is shown in the display window when the printer is in idle mode. EasyLAN Ethernet Software Instructions - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 6
startup (for help, see the EasyCoder PD41 Printer User's Guide (P/N 1-960652-xx)). The IP address of the printer is printed on the "Network settings" test label. 3 Enter the IP address in the address field of your web browser. The printer web page opens. 6 EasyLAN Ethernet Software Instructions - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 7
Network Parameters with PrintSet 4 PrintSet 4 is a PC-based software application that lets you configure your Intermec printer from your computer. The program is available on the PrinterCompanion CD, and can also be downloaded from the Intermec web site. PrintSet 4 requires that your PC is running - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 8
printer serial connection settings by printing a test label. The settings in your terminal program must be the same as that of the printer. 5 Input text in the terminal window and confirm that the same characters are printed on the labels. 6 Exit Dump mode. 8 EasyLAN Ethernet Software Instructions - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 9
between your computer and printer, as described on page 8. 2 Switch user to administrator with the default login (username: admin, password: pass). RUN su -p pass admin 3 Set the IP selection method to manual: SETUP "NETWORK,IP SELECTION,MANUAL" 4 Set the IP address (values are examples only - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 10
separated by colons (:). To use ARP'n'PING (Windows 2000) 1 Select Start > Accessories > Command Prompt. The Command Prompt launches. 2 In the Command Prompt, type: arp -s desired IP address printer MAC-address 10 EasyLAN Ethernet Software Instructions - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 11
3 Next, use Ping to make the printer set the IP address: ping IP address 4 Exit the Command Prompt. EasyLAN Ethernet Software Instructions 11 - Intermec PD41 | EasyLAN Ethernet Software for PD41/PD42 Instructions - Page 12
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com EasyCoder PD41/PD42 EasyLAN Ethernet Software Instructions *943-130-001* P/N 943-130-001
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
EasyLAN Ethernet
Software
for the EasyCoder®
PD41 and PD42 Printers
Instructions