Intermec PX4i Important RC11 Radio Information!

1

Important RC11 Radio Information!

For Users in English Speaking Regions (en)

802.11 Users

This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including

interference that can cause undesired operation.

Radiation Exposure Statement

This equipment complies with FCC and Canada RSS-102 radiation exposure limits set forth for an uncontrolled environment. End users must

follow the specific operating instructions for satisfying RF exposure compliance. Please follow operation instructions as documented for this

product.

This product meets the RF exposure guidelines when used with the Intermec accessories supplied or designated for this product. Use of other

accessories may not ensure compliance with RF exposure guidelines.

When installing and using the Intermec RC11 radio module, a 20-cm (8-inch) passing distance must be maintained from the body or head of

the user or nearby persons and the antenna. The antenna must not be touched during transmitter operation.

When installing the RC11 radio in products defined as “Portable”, the appropriate regulatory testing and approvals are required prior to sales

and marketing of the product. The user manual will contain the RF Exposure information for the portable product.

Approved Antenna List

This device has been designed to operate with the antennas listed in the next table. Each of these antennas has a maximum effective gain

(antenna gain minus cable loss) of 6 dB. Antennas not included in this list or having an effective gain (antenna gain minus cable loss) of greater

than 6 dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically

radiated power (e.i.r.p.) is not more than that permitted for successful communication.

Gain figures are linear dBi (decibels over isotropic). Antenna polarization is described as LP (linear polarized), CP (circular polarized), LCP (left

circular polarized), or RCP (right circular polarized).

* Gain, dBi + 3 = dBiC, Circular Polarized antenna gain

Intermec Technologies Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of

R&TTE Directive (1999/5/EC).

•

ETSI EN 300 328 (802.11b/g)

•

ETSI EN 301 489

•

EN 60950-1

The transmitter output power is 79.43 mW EIRP. The products using this module are intended for business and industrial environments.

They should not be used in residential environments and by children.

Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future

reference.

Caution: Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The

use of accessories other than those recommended, or changes to the product that is not approved by Intermec Technologies

Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.

Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards.

Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual.

Caution: 802.11a Wireless LAN 5.15 to 5.25 GHz (5 GHz radio channels 34 to 48) is restricted to indoor operations to reduce

harmful interference to co-channel Mobile Satellite System (MSS) operations.

Intermec P/N

Intermec M/N, Supplier P/N

Description

Gain* (dBi)

Cable Loss (dB)

063363-003

Laird-Cushcraft,

S2403BP 802.11b/g

Dipole LP

5.0

0.4

067262

Laird-Centurion, CAF95989 802.11b/g

Panel LP

5.0

0.4

805-833-001

Laird, MAF 94367

802.11b/g

802.11a

Dipole LP

2.4

3.8

0.4

0.8

805-834-001

Joymax, TWX-145XRTXX

802.11b/g

802.11a

Dipole LP

2.4

3.8

0.4

0.8

This product is marked with this logo and uses radio frequency bands that are not harmonized throughout the

European Community.