Invacare 3GSEAT Owners Manual 2 - Page 47
Wheelchair, Operation
View all Invacare 3GSEAT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
SECTION 5-WHEELCHAIR OPERATION SECTION 5-WHEELCHAIR OPERATION ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Set-up of the Electronic Control Unit is to be performed only by a qualified technician. The final adjustments of the controller may affect other activities of the wheelchair. Damage to the equipment could occur under these circumstances. Operating the Wheelchair NOTE: For this procedure, refer to FIGURE 5.1. Turning the Power On/Off 1. To turn the power on, move the on/off toggle switch up to the On position. NOTE: After turning power on, all indicators will light briefly and the display gauge will indicate one of the following: • The Current Battery Charge - Information gauge shows all LED's lit or partial LED's lit. Refer to table on previous page. • Out of Neutral at Power Up - Information Gauge shows all LED's flashing slowly. This occurs when the power is turned on when the joystick is out of neutral. This feature prevents sudden and unexpected movements of the power wheelchair. 2. To turn the power OFF, move the on/off toggle switch down to the OFF position. MKIV-A Joystick To Move Left To Move Forward To Move Backward Speed Joystick To Move Right Control On/Off Drive Select Toggle Switch MKIV-RII Joystick MKIV-A+ Joystick To Move Left To Move Forward To Move Backward Joystick To Move Right On/Off Drive Select Toggle Switch To Move Left To Move Forward To Move Backward Speed Control Knob Joystick To Move Right On/Off Toggle Switch FIGURE 5.1 Operating the Wheelchair Part No 1134791 47 3G Storm Series® Wheelchairs