Invacare 3GTQ-CG Owners Manual - Page 46
On/Off Button, Speedometer, Speed Control Buttons
View all Invacare 3GTQ-CG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
5 WHEELCHAIR OPERATION On/Off Button This button is located at the front of the joystick housing. It is used to turn the wheelchair On and Off. Speedometer The speedometer is used to show the maximum speed. The right-most LED indicates current maximum speed setting. The bottom left GREEN LED flashes to indicate that the joystick is in speed limit mode. Speed limit mode limits the drive speed to a pre-programmed value, typically when the seat has been elevated and the wheelchair is required to drive at 20% speed. Speed Control Buttons The speed control buttons (tortoise button ( ) and hare button ( )) are used to set and adjust the maximum speed. 1. To adjust the speed, perform one of the following: • Adjust Speed in 20% Increments (5 Speed Mode) - Press the tortoise button ( in 20% increments. The larger bars in the speedometer will light. ) or hare button ( ) to decrease/increase the speed • Adjust Speed in Smaller Increments (VSP Mode) - Perform the following steps: i. Press and hold both the tortoise button ( ii. Perform one of the following: ) and hare button ( ) until the joystick beeps. • Press the tortoise button ( speedometer will light. ) or hare button ( ) to decrease/increase the speed in 20% increments. The larger bars in the • Press and hold the tortoise button ( bars in the speedometer will light. ) or hare button ( ) to decrease/increase the speed in smaller increments. The smaller Invacare 3G Storm Series® 46 Part No 1143151