Invacare 5490IVC Owners Manual - Page 24

Invacare® Homecare Beds 4.8 Assembling the Universal Bed Ends Invacare recommends that two people perform this procedure. Before assembling bed, ensure that the locking casters are attached to the universal bed ends diagonally across from each other. 3. Tilt the bed end toward the head spring section and place the rivets B into the corner locks. 4. Return the universal bed end to its full upright position. The head spring rivets will lock into place. 5. Repeat the same procedure for other universal bed end. A B 1. Stand one bed end A as close to the head spring section C as possible. 2. Grasp the head spring section by the side and raise it until the rivets on the corner plates of the spring section are high enough to place into the corner locks D on the bed end. WARNING! Risk of Injury or Damage To avoid injury or damage from misuse: - DO NOT place your hand between the spring section and the bed end. 24 C D 1114836-H-05