Invacare HF2PCL6 Owners Manual - Page 15

Setup

Page 15 highlights

3 Setup 3.1 Dealer Setup WARNING! - Before the first patient use, the provider MUST disinfect the product. Refer to the Disinfecting section. - Before patient use, the provider MUST check the hydrostatic testing date. Refer to The Hydrostatic Testing Date section. WARNING! Risk of Injury For medical applications, it is very important to select the prescribed level of oxygen flow. Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. - Use ONLY as directed by a licensed practitioner. - DO NOT increase or decrease the flow unless a change has been prescribed by your physician or therapist. 3.2 User Setup WARNING! - When receiving the cylinder assembly from the provider, the user/patient MUST perform a receiving inspection. Refer to the Receiving Inspection section. 1112648-H-00 Setup 3.3 Receiving Inspection Remove product from package and inspect for damage. If there is any damage, DO NOT use. Contact your dealer/Home Care equipment provider. 3.4 Cylinder Prefill Inspection WARNING! Risk of Injury or Damage - Oxygen cylinder assemblies shall be used for personal use only. Not to be filled for resale or use by professional users. - Filling of cylinder assemblies is performed by Invacare HomeFill Oxygen System only. - This cylinder assembly is to be used with the HomeFill system. This cylinder contains 93±3% oxygen produced by an oxygen concentrator using the pressure swing adsorption process. - DO NOT handle the cylinder assembly or use contents until you are professionally trained, including emergency procedures. - Use this cylinder assembly in accordance with the HomeFill user manual. - Secure the cylinder assembly during storage and use. DO NOT drop. - No smoking in cylinder assembly area. Keep away from heat, flame or spark. - Keep out of the reach of children. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Setup
3
Setup
3.1
Dealer Setup
WARNING!
Before the first patient use, the provider MUST
disinfect the product. Refer to the Disinfecting
section.
Before patient use, the provider MUST check the
hydrostatic testing date. Refer to The Hydrostatic
Testing Date section.
WARNING!
Risk of Injury
For medical applications, it is very important to select
the prescribed level of oxygen flow. Uninterrupted use
of high concentrations of oxygen over a long duration,
without monitoring its effect on oxygen content of
arterial blood, may be harmful.
Use ONLY as directed by a licensed practitioner.
DO NOT increase or decrease the flow unless a
change has been prescribed by your physician or
therapist.
3.2
User Setup
WARNING!
When receiving the cylinder assembly from the
provider, the user/patient MUST perform a receiving
inspection. Refer to the Receiving Inspection section.
3.3
Receiving Inspection
Remove product from package and inspect for damage. If there is any
damage, DO NOT use. Contact your dealer/Home Care equipment
provider.
3.4
Cylinder Prefill Inspection
WARNING!
Risk of Injury or Damage
Oxygen cylinder assemblies shall be used for personal
use only. Not to be filled for resale or use by
professional users.
Filling of cylinder assemblies is performed by Invacare
HomeFill Oxygen System only.
This cylinder assembly is to be used with the HomeFill
system. This cylinder contains 93±3% oxygen
produced by an oxygen concentrator using the
pressure swing adsorption process.
DO NOT handle the cylinder assembly or use
contents until you are professionally trained, including
emergency procedures.
Use this cylinder assembly in accordance with the
HomeFill user manual.
Secure the cylinder assembly during storage and use.
DO NOT drop.
No smoking in cylinder assembly area. Keep away
from heat, flame or spark.
Keep out of the reach of children.
1112648-H-00
15