Invacare M91-TS Owners Manual 3 - Page 61
Adjusting the Manual Tilt Cable Assembly, Adjusting Back or Headrest Upholstery
View all Invacare M91-TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
6.9 Adjusting the Manual Tilt Cable Assembly For this procedure, refer to FIGURE 13. For operating the manual tilt option, refer to Operating the Manual Tilt Option (TDX Spree Only) on page 49. 1. Loosen the jam nut (counterclockwise) on the cable. 2. Turn the cable adjuster until the right release lever engages the tilt mechanism properly. 3. Retighten the jam nut (clockwise) on the cable. 4. Tilt the wheelchair to any tilt position. Refer to Operating the Manual Tilt Option (TDX Spree Only) on page 49. Make sure the wheelchair holds the position. If the wheelchair does not hold the position, repeat STEPS 1-4 until the wheelchair is able to hold the tilted position. 6.10 Adjusting Back or Headrest Upholstery 1. Rotate the spreader bar either: • Counterclockwise (away from back upholstery) to loosen back/headrest upholstery. • Clockwise (towards back upholstery) to tighten back/headrest upholstery. 6 ADJUSTMENT Tilt Cylinders Jam Nut Jam Nut Cable Adjuster Cable Adjuster FIGURE 13 Adjusting the Manual Tilt Cable Assembly Headrest Upholstery Spreader Bar Back Upholstery Part No 1143192 FIGURE 14 Adjusting Back or Headrest Upholstery 61 Invacare® Adjustable ASBA Seats