Invacare R51 Owners Manual - Page 48

Joystick

Get Invacare R51 PDF manuals and user guides View all Invacare R51 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

SECTION 10-JOYSTICK SECTION 10-JOYSTICK ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result. Preparing the Joystick For Use NOTE: For this procedure, refer to FIGURE 10.1. NOTE: The joystick is factory installed on the right side of the wheelchair. To reposition the joystick onto the left side of the wheelchair refer to Repositioning the Joystick on page 49. The joystick should be repositioned by a qualified technician. 1. Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket. 2. Slide joystick mounting tube to the desired position. 3. Turn the adjustment lock lever to secure the joystick mounting tube in the mounting bracket. Mounting Bracket Joystick Mounting Tube NOTE: Joystick not shown. Adjustment Lock Lever FIGURE 10.1 Preparing the Joystick For Use R51™and R51LXP 48 Part No. 1106645

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
SECTION 10—JOYSTICK
R51™and R51LXP
48
Part No. 1106645
SECTION 10—JOYSTICK
±
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Preparing the Joystick For Use
NOTE: For this procedure, refer to FIGURE 10.1.
NOTE: The joystick is factory installed on the right side of the wheelchair. To reposition the joystick
onto the left side of the wheelchair refer to Repositioning the Joystick
on page 49. The joystick
should be repositioned by a qualified technician.
1.
Turn the adjustment lock lever to release the joystick mounting tube from the
mounting bracket.
2.
Slide joystick mounting tube to the desired position.
3.
Turn the adjustment lock lever to secure the joystick mounting tube in the mounting
bracket.
FIGURE 10.1
Preparing the Joystick For Use
Mounting Bracket
Joystick Mounting Tube
Adjustment Lock Lever
NOTE: Joystick not
shown.